ElectrIQ Wild1 Manuale utente
1
User Manual
Wild1 Wildlife Camera
2
Introduction
Thanks for purchasing our Wild1 Wildlife Camera. This
device is a special camera for recording and observing
wildlife. For your ease of operation, we have provided
detailed instructions. This user manual will introduce
you to the functions and operation of this wildlife
camera. Before using the product, please read this
user manual carefully.
3
Security
Please read the following safety precautions carefully
before using the device.
Do not try to open the camera case by yourself.
Only an authorised maintenance person can repair
the device.
When using the camera for a long time, the
temperature of device may rise, this is normal.
Please only use the accessories we have provided.
4
Parts of the camera
1. Up Button 2. Right Button
19
15
16
17
18
5
3. Shot Button 4. OK Button
5. Left Button 6. Menu Button
7. Replay Button 8. Down Button
9. TF Card Slot 10. AV Jack
11. USB Jack 12. OFF
13. TEST 14. ON
15. Infrared LEDs 16. Lens
17. Front Motion Sensor
18. Side Motion Sensor 19.Display Screen
Power supply
6
♦Please install batteries into the device before using.
♦Open the camera case.
♦Insert 4 or 8 x 1.5 V AA batteries into the battery
compartment. Ensure that the polarity is correct.
♦When using 4 batteries, please make sure to insert all
the 4 batteries in the same compartment. Installing
batteries in different compartment, such as 2 in upper
part and 2 in lower part will not power the device for
operation.
♦Close and lock the battery case.
♦If you are operating the device on a power adapter
(not supplied), open the rubber seal on the bottom of
the camera and insert the plug of the AC adapter cable
7
into the DC socket. The adapter must supply a
direct-current voltage of 6 V with at least 680mA.
Inserting storage media
►Since the camera has no built-in memory, it can only
work when a TF/Micro SD card is inserted. It is
recommended to format the TF/Micro SD card in the
camera prior to operation to improve the battery life
and shutter speed.
►The device supports TF/Micro SD memory cards with
a capacity of up to 32GB.
8
►Insert a TF/Micro SD memory card into the memory
card slot of the device, push it into the slot until it clicks
into place.
►To avoid malfunctions, keep the memory card away
from moisture and strong vibration, dust, heat sources
and direct sunlight.
►Insert the memory card as indicated by the icon on
the slot. Never force the memory card
into the slot. Never bend or twist the memory card.
►After transport, wait until the memory card has
reached ambient temperature before using it for the
first time. Major fluctuations in temperature or
humidity can lead to condensation which could cause
9
an electrical short-circuit. Keep the memory card in the
protective case.
►When the TF/Micro SD memory card is full, it will
automatically stop taking picture and recording video.
►To remove an TF memory card from the memory card
slot of the device, press the protruding edge of the
memory card in a little way until it pops out. Then
remove the card.
Basic operation
After connecting a power supply, move the switch to
the “TEST”position to make the settings described on
10
the following pages using the control panel buttons. In
test mode, the infrared lamp is closed.
♦Press the down button to switch from video to photo
mode.
♦Press the up button to switch from photo to video
mode.
♦Press the MENU button to open the settings menu.
Unconfirmed changes will not be saved.
Press the up /down buttons to select the desired menu
entry which you can then activate with the OK button.
If you change settings, you must always confirm your
changes with “OK”. Use the MENU button to navigate
one menu level backwards.
Altri manuali per Wild1
1
Indice
Altri manuali ElectrIQ Videocamera
