CONNECTION INSTRUCTIONS
If the input polarity of the pedal is center negative, connect the DC power cable directly to the
pedal.
NOTE
Before use, please confirm the input polarity of your pedals. If a polarity reversal cable is
required and not used, damage to your devices may occur.
SPECIFICATIONS
Power Supply: 12V DC power adapter
Outputs: Seven 9V power supply outputs and one 18V power supply output
Current Draw: 9V DC output maximum current of 250mA
Current Draw: 18V DC output maximum current of 150mA
INCLUDED
One 12VDC/2A Power Adapter
Four 460mm DC Power Cables
Four 610mm DC Power Cables
Pedalboard Mounting Strap
Owner’s Manual
www.ehx.com
AC Power Adaptor
If the input polarity of the electrical device is center positive, connect the DC power cable to a
polarity reversal cable (not included) and then connect the polarity reversal cable to the pedal.
AC Power Adaptor
WARRANTY & NOTICES
Warranty Information
Please register online at http://www.ehx.com/product registration.
Electro-Harmonix will repair or replace, at its discretion, a product
that fails to operate due to defects in materials or workmanship for
a period of one year from date of purchase. This applies only to
original purchasers who have bought their product from an
authorized Electro-Harmonix retailer. Repaired or replaced units will
then be warranted for the unexpired portion of the original
warranty term. If you should need to return your unit for service
within the warranty period, please contact the appropriate office
listed below. Customers outside the regions listed below, please
contact EHX Customer Service for information on warranty repairs
customers: please obtain a Return Authorization Number (RA#)
from EHX Customer Service before returning your product. Include,
with your returned unit, a written description of the problem as well
as your name, address, telephone number, e-mail address, RA# and
a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX c/o NEW SENSOR CORP.
55-01 2ND STREET LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ UNITED KINGDOM
Tel: +44 179 247 3258
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for
help.
Disposal: This symbol indicates that this product shall not
be treated as household waste. Instead it shall be disposed in
accordance with local environmental laws and guidelines and,
where as appropriate, handed over to the applicable collection
point for the recycling of electrical and electronic equipment.
This product was produced after Jan 1 2006.
