Electro-Voice R300 Manuale utente

UHF WIRELESS MICROPHONE

USER GUIDE

R300

SYNC

R300

EZsync Clear

SET

NAHC

MHz

EZsync ClearScan

Electro-Voice

300

1177

TAB LE OF CONTENTS

1. Quick Set–up

 •Receiver.................................................................................................................4

 •Transmitter.............................................................................................................5

 •SystemsOperation..............................................................................................6

2.DetailedComponentDescriptions

 •Receiver.......................................................................................................... 7-14

 •HandheldTransmitter .................................................................................15-16

 •BodypackTransmitter................................................................................. 17-19

3.GuidelinesandRecommendationsForBestPerformance ...............................20-21

4.TroubleshootingGuide .............................................................................................22-23

5.FrequentlyAskedQuestions ...................................................................................24-26

6.ComponentsandAccessories...................................................................................... 27

7. CompatibleChannelFrequencyGroups...............................................................28-31

8.Specications............................................................................................................32-33

9.Certications..................................................................................................................... 34

10.FactoryService ................................................................................................................ 35

01QUICK SETUP: RECEIVER

1. Donotconnectthereceivertoanyotherequipmentyet!

2. ConnectthetwoAntennastothereceiver.

3. Installthebladesintothepowersupply,plugitintothebackofthereceiver,

andintoanoutlet.

4. PressthePOWERswitch.Displaywilllightup.

5. Pressandholdthe buttonuntilCLEARSCANscrollsacrossthescreen.

6. WhenCLEARSCANstops,thereceiverwillbesettotheclearestchannel.

7. MutetheAudioMixerchannelwherethereceiverwillbepluggedin,orsetittominimum.

8. LeavethereceiverONandconnectittotheaudiosystemusingeithertheXLRconnectoror

¼-inch line level jack.

Receiver “Quick Set-up” is complete.

QUICK SETUP: TRANSMITTER

1. WiththePowerswitchonthetransmitterOFF,installtwofreshAAbatteriesintothetransmitter.

2. PressthetransmitterPowerSwitchuntilthedisplaycomeson.

3. LoosenthetransmitterbatterycovertoexposetheEZsyncPort,asshown.

4. HoldthetransmitterwiththeEZsyncPortfacingthereceiver,abouta

foot(30cm)away.*

5. PresstheSYNCButtononthereceiver,SYNCwillshowinthedisplay.

6. Oncethechannelissetinthetransmitter,thedisplaywillswitchtothemain

displayandshowRFandAudioLevels.

*Note: WhenperformingEZsync,makesurelightingconditionsarenottoobright.Extremely

brightlightingcaninterferewithEZsync.

Transmitter “Quick Set-up” is complete.

SYNC

R300

EZsync Clear

SET

SYNC

EZsync

R300 ClearScan

SET

CHANNEL

MUTE

SYNC

MHz

QUICK SETUP:SYSTEMSOPERATION

1. Setthemixer/ampgain.

2. Talkorsingintothemicrophoneorplaytheguitaratanormalvolume.You

shouldhearaudiocomingoutofthesystem.

3. Youmayhavetoadjustthegain(viathecontrolnexttotheconnectoronthe

receiverbackpanel)toprovidethebestinputvolumeforyourmixer/amp.

Notes:

• Seepage10ofthismanualformoreinformation.

• SeeImage11oftheQuickStartGuideforgaincontrollocation.

“Quick Set-up” is now complete. Please enjoy your R300 system.

SYNC

R300

EZsync Clear

SET

EZsync ClearScan

Electro-Voice

300

ANTENNA B ANTENNA A12V .500mA

MIN MAX

VOLUME

LEVEL

-10dB 0dB

BALANCED OUT UNBALANCED OUT

DETAILED COMPONENT DESCRIPTIONS

2.1 |R300 Receiver

RECEIVER CONTROLS, CONNECTORS

1. PowerON/OFF

2. SYNCDataTransferButton

3. InfraredEZsyncWindow

4. GraphicalDisplay

a.ChannelorFrequencyDisplay

b.DiversityIndicator

c. RFStrengthMeter

d.AudioLevelMeter

e. LockIndicator

f. SquelchLevelIndicator

5. ScrollDownandUp( and )ControlButtons

6. SETControlButton

7. ClearScanControl(pressandhold button)

8. TNCAntennaInputConnectors(2)

9. AudioOutputVolumeControl

10. XLRBalancedOutputConnector

11. ¼InchUnbalancedLineLevelAudioOutputConnector

12. UnbalancedOutputLevelSwitch(-10dBor0dB)

13. DCPowerConnector(12VDC,500mA)

14. PowerCordRetainer

8 89 10 11 12 13 14

DETAILED COMPONENT DESCRIPTIONS

2.1 |Receiver Setup & Operation

1. Placethereceiverandantennaswherethereisaclearlineofsighttotheareawherethe

transmitterwillbeused.Rotatetheantennastoseparatethemby90degrees.

2. Install the appropriate power connection blades into the power supply and con-

nect the power supplycordtothereceiver.PlugthepowersupplyintoanACoutlet.Push

thepowerbuttontoturnthereceiveronandconrmthatitisonbycheckingthemaindisplay

screen.

3. Manual Channel Change

a.The and buttonsallowyoutoscrollthroughtheChannels.WhentheChannel

youdesireisdisplayed,stopscrolling.

b.After2secondsthedisplayedchannelnumberwillstarttoash.

c. Thenumberwillstopashingandthenewchannelisinstalled.

d.TurnonthetransmitterandholdtheEZsyncportfacingthereceiverEZSyncport,

aboutafoot(30cm)away,asdescribedonpage5.

ANTENNA B ANTENNA A12V .500mA

MIN MAX

VOLUME

LEVEL

-10dB 0dB

BALANCED OUT UNBALANCED OUT

continued on next page

e. PresstheSYNCbuttononthereceivertotransferthechannelinformation.

f. ThereceiverwilldisplaySYNCuntilthedataistransferred,thenreturntothemainscreen.

g.Thetransmitterdisplayscreenwillnowshowthenewchannelandfrequency.

NOTE:

1. Ifthechanneldatawasnottransferredtothetransmitterafter5seconds,thereceiver

willdisplayERROR.BecertainthatthetransmitterisOnandtheEZsyncportisfacing

thereceiverandtryagain.

2. Ifthedatastilldoesnottransfer,trynewbatteries,ormovetheunittoashadedarea

awayfromdirectsunlightorbrightlightsbeforetryingagain.

R300 ClearScan

SET

CHANNEL

MUTE

SYNC

MHz

SYNC

R300

EZsync Clear

SET

SYNC

EZsync

continued on next page

DETAILED COMPONENT DESCRIPTIONS

4. ClearScan:Thisfeatureautomatestheprocessofndingaclearchannel.

a.Toscanfortheclearestchannelinagroup,pressandhold untilCLEARSCAN

appearsinthedisplay,thenreleasethebutton.

b.Whenthescaniscomplete,thedisplaywillshowtheclearestavailablechannel.

c. UsetheSYNCbuttontotransferthenewchannelasinstep3.

5. DuringsetupmakesurethemixeroramplierinputusedfortheR300ismutedorturneddown

toaminimumlevel.

6. Pluganaudiocable(notsupplied)intothe3pinXLRor¼-inchTRSoutputoftheR300.

Note: TheXLRconnectoristhepreferredconnectionsincetheoutputisbalancedandwillbe

moreimmunetonoiseforlongerrunsofcablealthougheithercanbeusedwithgood

results.Setthebalancedoutputlevelonthebackpanelto12o’clock(midwayinthe

range)tostartandadjustlaterifnecessary.Ifthe¼-inchunbalancedoutputisused,start

withadjustmentswitchinthe-10dBsetting.

continued on next page

Altri manuali per R300

Indice

Altri manuali Electro-Voice Microfono

Electro-Voice

Electro-Voice PL50-N/D Manuale utente

Electro-Voice

Electro-Voice 727 Guida alle dimensioni

Electro-Voice

Electro-Voice N/D857 Manuale utente

Electro-Voice

Electro-Voice Cardinal Manuale utente

Electro-Voice

Electro-Voice Sentry III Manuale utente

Electro-Voice

Electro-Voice 635L Manuale utente

Electro-Voice

Electro-Voice 924 Guida alle dimensioni

Electro-Voice

Electro-Voice N/D267a Manuale utente

Electro-Voice

Electro-Voice RE45N Manuale utente

Electro-Voice

Electro-Voice PL Series Manuale utente

Electro-Voice

Electro-Voice R300 Manuale utente

Electro-Voice

Electro-Voice CL-1 Manuale utente

Electro-Voice

Electro-Voice 641 Guida alle dimensioni

Electro-Voice

Electro-Voice N/D308 Manuale utente

Electro-Voice

Electro-Voice 635A Manuale utente

Electro-Voice

Electro-Voice R300 Manuale utente

Electro-Voice

Electro-Voice RE90B/BW Manuale utente

Electro-Voice

Electro-Voice RE410 Manuale utente

Electro-Voice

Electro-Voice PolarChoice PC-12 Manuale utente

Electro-Voice

Electro-Voice RE50 Manuale utente

Electro-Voice

Electro-Voice RE1000 Manuale utente

Electro-Voice

Electro-Voice RE500 Manuale utente

Electro-Voice

Electro-Voice 714 Guida alle dimensioni

Electro-Voice

Electro-Voice N/D 257B Manuale utente

Manuali Microfono popolari di altre marche

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manuale utente

DAPAudio

DAPAudio RM-101 Manuale utente

AKG

AKG CHM 21 Manuale utente

Sennheiser

Sennheiser evolution wireless series EM 100 Manuale utente

Sony

Sony C-48 Manuale utente

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manuale utente

Shure

Shure WH30TQG Manuale utente

auna PRO

auna PRO MIC-900 Manuale utente

AKG

AKG D 3800 Manuale utente

Shure

Shure KSM141 Manuale utente

MAIIN SOUND

MAIIN SOUND IIN style Manuale utente

Earthworks

Earthworks TC25 Manuale utente

Sennheiser

Sennheiser evolution D1 Manuale utente

Alesis

Alesis MicLink Wireless Manuale utente

DSPPA

DSPPA D6234 Manuale utente

Monacor

Monacor IMG STAGELINE ECM-300B Manuale utente

Ansr Audio

Ansr Audio Scan16 Manuale utente

Shure

Shure MXA710 Series Manuale utente