preset recording time.
2.3 Press MODE to switch between preview or playback mode
3 Playback Mode:
3.1 Press MODE to enter playback mode. It will show the last video captured with the OSD.
This OSD can be removed by pressing UP key. If there is no files inside the memory, it will
pop up “ NO FILE” and return to preview mode
3.2 Use LF/RT key to select the desired video clip.
3.3 Press DN key to start playing the selected video clip
3.4 During playback, use UP to pause, press again or RTkey to resume playing. Use LF/RT key
to play the clip reverse or forward. Use OK key to stop the video and back the start position.
3.5 Press DISP key will enter folder list. Use UP/DN key to select the folder. The folder name is
sorted by the date and time. Press OK to confirm selection.
Note: never pull out the SD Card when the module is recording, the file will be corrupted if do so.
System Setup using PC interface
Before setup, need to prepare the RS232 adapter cable and connect to pc com port. Open the program
DVR6828PC.exe. The application will be opened, as below:
1 Open the COM port: make sure the adapter cable is
connected to the module (J1) and the module is
powered. Select the COM port no. Please note some
PC/notebook uses different number of serial port, need
to check the right port number before it can connected
properly. The baud rate is set to 9600. Press OPEN to
connect to module.
2 Set the Clock: one can get the clock from module or
get the system clock from PC. Then press SET to set
the clock to module. Note that if take the clock from PC
system, need to set ASAP. Since the system clock will
not update this application automatically.
3 Memory Operation: one can format the memory card
by press FORMAT.Awindow will be popped up for
confirmation. Note this action can’t be undo. Once
formatted, the content of the card will be erased.
4 Motion Detect Setting: to turn on-off the MD. By default,
it is always ON at power up. Use short cut key UP to
turn off and ON. Sensitivity can also be selected
5 AVI Setting
5.1 Image quality can be set for Hi, Mid and Lo, the
higher the quality, the bigger the file size.
5.2 Duration: limited to 10-60sec, this is the best
time frame for system, more stable.
5.3 Frame rate: it can be set from 1fps to 5fps, higher frame rate will have bigger file size.
6 Vehicle No.: max 10 characters, include text or digit. This will stamp on the photo at the left hand
side lower bottom.
Note: before connect to PC, please turn off the MD by press UP key, to reduce the error rate.
Key Operation (summary)
Preview Playback During Playing
SNAP Press to capture - -
Mode Enter playback Enter preview -
OK - - Stop
UP MD on/off Turn ON/OFF OSD Pause/Resume
DN - Start playback -
LF - Select file -Resume, reverse
RT - Select file -Resume, forward
DISP - Select folder
Release 1.0 20090320 4
