Eleglide T1 Manuale utente
User Manual
CATALOGUE
1~18
19~36
37~54
55~72
73~90
91~108
ENGLISH
FRANÇAIS
DEUTSCHE
ESPAÑOL
ITALIANO
POLSKI
*Before your first operation,
please read the user manual carefully!
1. Note
2. Warning
3. Diagram
4. Specification
5. Package List
6. Assembly Guide
7. LCD Display Guide
8. Maintenance
9. Troubleshooting
10. Warranty
Contents
Before your first ride, it is important for you to know your new e-bike well, so that you can get the best
performance, comfort, enjoyment and safety from it during your ride. To understand the new bicycle
and the correct operation, you should first read the manual carefully.
Second, it is significant to take your first ride under a safe and controlled circumstance, like staying
away from cars, obstacles and other cyclists.
Third, bicycles are vehicles with certain risks. Please follow the traffic rules during cycling. It's better to
learn the local traffic rules about riding an e-bike on public roads before your first ride in case you
violate the regulations. For your own safety, never forget to put on a qualified helmet before you get on
the e-bike.
Fourth, the electric bike is supplied without basic mandatory equipment, which may vary from place to
place. Therefore, if you intend to use the e-bike on public roads, it's necessary to equip the bike with the
basic mandatory equipment, in accordance with the relevant laws and regulations.
In addition, this product is designed for your personal use. Do not use it for commercial or other
purposes.
Last, keep this manual safe for reference.
1. Note
Before each charge, check the charger, cable and plug. If there is any damage, do not use the charger.
Before riding, check the tire pressure and check whether the wheels and handlebar are installed
correctly and tightly.
Before riding, check whether the headlights are securely fastened in the correct position, clean and not
covered by anything. Damaged reflectors must be replaced.
2. Warning
01
EN
Besides, if the seat post in the seat tube is not inserted deep enough to reach the minimum insertion
mark, the seat post may break. Check whether it is inserted deeper than the minimum insertion depth.
When braking on a wet road, the braking distance is usually longer than on a dry road. Therefore, brake
earlier for a safer stop.
When you have to brake urgently, please hit the right hand brake first to stop the rear wheel, and then hit
the left hand brake, especially when you brake at a high speed. If the front wheel stops suddenly while
the rear wheel is still cycling at a high speed, you may fall over and get hurt. So please ride it carefully.
Furthermore, avoid puddles, wet mud, swamps, water, snow or ice. Try not to use the e-bike on a rainy,
stormy or snowy day. If the bicycle's electric parts (control unit, engine and battery) get damp, wet or
soaked, it will cause irreversible damage, or even a battery explosion.
This product can only be used by one adult at a time. Do not carry any extra passengers.
This vehicle is not a toy. Same as other vehicles, it is possible to fall, crash or encounter other danger-
ous situations. Please don't offer your e-bike to anyone that doesn't know how to use it correctly. If you
let anyone else ride your bike, it will be your responsibility to ensure that all riders understand all
warnings, cautions, instructions and safety precautions, and to ensure that they are able to use this
product safely and responsibly and protect themselves and others from injury.
3. Diagram
A
K
I
H
J
M
N
L
B
O
C
G
F E
D
A
P
K
I
H
J
M
N
L
Q
B
O
C
G
F E
D
T1
T1 Step-Thru
02
EN
A. Handlebar with Display
D. Pedals
G. Rear Derailleur
J. Quick Release
M. Battery Charging Hole
P. Adjustable Stem
B. Front Wheel
E. Chain
H. Taillight
K. Saddle
N. Keyhole for Battery Lock
Q. Reinforced Beam
C. Brake
F. Electric Motor
I. Rear Rack
L. Battery
O. Headlight
16
4
1
23 5 4
16
4
1
23 5 4
1. Brake Lever
4. Gear Shifter
2. Handle
5. Bell
3. Button of Display
6. LCD Display
T1
T1 Step-Thru
4. Specification
T1
27.5"x17.5"
1790x690x1118mm
26kg
660mm
IPX4
Aluminium Alloy
100km
No Limit
25km/h
T1 Step-Thru
27.5"x17"
26kg
Size of Frame
Unfolded Size
N.W.
Length of Handlebar
Waterproof Level
Material of Frame
Max. Speed
Assist Mode
Manual Mode
Model
Basic Spec.
03
EN
Max. Range
T1
12/16/20/23/25 km/h (Level 1-5)
7 (Rear), Shimano
250W, 36V
500W
260
50N.M
T1 Step-Thru
Number of Gears, Brand
Rated Power, Voltage
Max. Inst. Power
Max. RPM
Max. Output Torque
Model
Basic Spec.
Derailleur
Motor
12.5Ah, 36V
450Wh
4-6H
Yes
Disc Brake & Auto Power-off Design
160mm
2mm
27.5"x2.1"
CST Pneumatic Tires
45-65PSI
50PSI (Front), 55PSI (Rear)
3.5” LCD
Mechanical Damping with Lockout
160-200cm
27.5"x1.75"
155-195cm
Capacity, Voltage
Standard Power Consumption
Charging Time
Protection System
Type
Outside Diameter
Thickness
Size
Brand, Type
Tire Pressure
Best Tire Pressure
Size, Type
Battery
Brake
Brake Disc
Tire
Display
Shock Absorption
Recommended Rider Heights
Note: the max speed and range data are provided by the Eleglide lab. The max range is achieved under
the following conditions: a full charge, a 75kg load, 26℃temperature, 15km/h constant speed, on flat
roads with no strong wind.
The actual data may vary based on different road conditions, temperature, humidity, wind speed, and the
rider’s habits (the frequency of braking, speed shifting, etc.) and rider’s weight.
5. Package List
Eleglide E-bike x 1
Pedal x 2
Spoke Reflector x 2
Key x 2
User Manual x 1
Tool Kit x 1
Taillight x 1
Charger x 1
Headlight x 1
LCD Display x 1
04
EN
Speed Level of Assist Mode
Step 1 Install The Handlebar
A) Take out the bike and make it stand up.
B) Open the clip by loosing the screws on it.
C) Place the handlebar in the right position and make sure the clip is in the middle of the bar.
D) Lock the clip by tightening the screws.
Step 2 Install The Front Wheel
A) Put the bike upside down and remove the temporary protected bar by loosing the nut on it.
B) Insert the front wheel into the fork dropouts and make sure the wheel is fully seated.
C) Remove the nut and one spring on the quick release.
D) Slide the quick release through the hub from the opposite side of the brake disc.
E) Slide the spring into the hub and tighten the nut to fix the quick release.
6. Assembly
05
EN
Step 3 Fix The Headset
A) Adjust the headset of the bike to the right position.
B) Tighten the headset with the M4/M5 socket head wrench.
Step 4 Adjust The Stem Angle (Only for T1 Step-Thru)
A) Loose the stem with the M6 socket head wrench.
B) Adjust the stem to the angle you want and fix it by tightening the screws.
Step 5 Install The Headlight
A) Place the headlight in the right position.
B) Fix the light by tightening the screw with the M4 socket head wrench
06
EN
Step 6 Install The Taillight
A) Connect the wire to the taillight.
B) Place the taillight in the right position and tighten the screws to fix it.
Step 7 Fix The Mudguard
A) Fix the support of the mudguard by tightening the screws with the M5 socket head wrench.
07
EN
Step 8 Install The Pedals
Step 9 Install The LCD Display
A) To make it easy to install, disassemble one of the supports of the display first with the M3 socket
head wrench.
B) Slightly open another support to get the display stuck on the handlebar.
C) Slightly open the disassembled support and buckle it on the handlebar. Fix it with the M3 socket
head wrench.
D) Fix the display in the middle of the handlebar with the M3 socket head wrench.
E) Open the clip of the display button and buckle it on the handlebar. And use the M2.5 hex wrench to
tighten the clip and fix the button.
F) Connect the display cable with the power cord.
Pedals Left Right
08
EN
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Eleglide Bicicletta
