EleMake FSDB-801B Manuale utente
Smart Lock
FSDB-801B, KSDB-601B, KSDB-601S
FOR CUSTOMER SERVICE PLEASE CALL:
(800)-315-9607
WWW.ELEMAKELOCKS.COM
Elemake keeps on working hard to provide customers top-grade
quality hardware at affordable price. Gracing customers’ doors
with stylish designs and excellent craftsmanship since 1976,
Elemake is always dedicated to making your life more safe and
stylish.
Series-ITD locks are a family of touch screen and fingerprint
internet deadbolts. They are ideal for residential homes,
apartment buildings, offices, schools, hospitals, and other
applications where restricted access to an area is needed.
All of ELEMAKE ITD series keyless deadbolt products come with
a 5 years’ warranty.
NOTE TO INSTALLER
Watching the videos are highly recommended, the video will
help the customer to understand the installation and functions
more easily.
Installation Video Linkage:
Functions Instruction Video Linkage:
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN
DAMAGE TO THE PRODUCT AND VOID THE FACTORY WARRANTY
For Technical Assistance call Elemake at
1 (800)315-9607
QUICK SOLUTIONS TO COMMON PROBLEMS:
Initial Password:
123456
TABLE OF CONTENT
1. Warnings……………………………………………………………………………..2
2. Reset Lock To Factory Default...........................................................3
3. Introduction.....................................................................................4
3.1 Installation
(1) Step 1----Define the right-handed or left-handed door……5
(2) Step 2----Components and Tools…………………………………5
(3) Step 3----Prepare Deadbolt for Installation………….……....6
(4) Step 4 ---Install Deadbolt and door position
sensor ……..…………………………………………….………….7-8
4. Setting up.........................................................................................4
4.1 Steps to setup ..................................................................4
4.2 Add members ...................................................................4
4.3 Connect to Wifi .................................................................4
5. How to use the Elemake touchscreen deadbolt
3.2.1 Basic Functions(Local Operation) …………….……………9-10
3.2.2 Internet Functions………………………………………….....11-13
5. Trouble shooting................................................................................4
6. Quality Policy………………………………………………………………………….20
TABLE OF CONTENTS
1. WARNINGS
FCC: Class B Equipment
Series ITD series deadbolt has been tested and found to comply with the limits
for a Class B digital device---Part 15 of the FCC Rules. These limits are
purposed to provide protection against harmful interference in a residential
environment. The deadbolt generates, uses, and can radiate RF energy and, if
not installed and used as the instructions on users’manual, may have harmful
interference to radio communications. However, If this deadbolt does cause
harmful Interference to radio or television reception, which can be
determined by turning the deadbolt off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Relocate the radio communication devices’receiving antenna.
•Make separation between the deadbolt and receiver.
• Consult the customer service or professional radio/ technician for help.
.
2. RESET DEADBOLT TO FACTORY DEFAULT
The following procedure clears all the setting of the deadbolt, and returns the
deadbolt to default –deleting all user password/fingerprint/card.
2.1 RESET METHOD 1( see Figure A-1 to Figure A-4)
Figure A-1
Remove the batteries and wait
for 20 seconds,
Hold down the reset button
at the bottom of the inside
escutcheon
RESET BUTTON
Figure A-2
2.2 RESET METHOD 2( see Figure B-1)
This method is only for the family member who already
get the password/fingerprint enrolled(Please must keep
the door opened when doing the reset)
Install the batteries into the
inside escutcheon
Hold down the reset button
10-30s till voice says “reset
success”
Figure A-3
Figure A-4
Touch the screen with the back of
hand to activate the deadbolt,and
input 888 ,
The voice will remind family
member to input the enrolled
password or touch the fingerprint
for validation.
After validation, the deadbolt will be
reset till the voice says ”Reset
success”
Figure B-1
3. INSTALLATION
IMPORTANT THINGS INSTALLER NEED TO KNOW
PRIOR TO INSTALLATION
a. Initial password “123456”
b. Bolt Direction
Please make sure the bolt is installed in correct direction according
to ”up”mark on the bolt. (see Figure C1)
c. The bolt must be in a retracted (unlocked) position when installing the
lockset. (see Figure C2)
d. The cable from the outside escutcheon should go under the bolt, (see
Figure C-3) and should go through the slot at the right side of the
mounting bracket. (see Figure C-4)
Figure C-1
Figure C-2
Figure C-3
Figure C-4
e. Thumb turn on inside escutcheon need to be turned to different
position for right handed door or left handed door in inside escutcheon
installation. (see Figure C-5)
f. Before installing the batteries, test the mechanical operation of the
lock by using
Both thumb turn and the key. The movement of the bolt should be
smooth and unobstructed. If operation is not smooth, review the
previous steps to ensure proper installation. (see Figure C-6)
Vertical Position
For Right Handed
Door
Horizontal Position
For Right Handed
Door
Figure C-5
Questo manuale è adatto per i seguenti modelli
2
Indice
