Elinz W7QUAD Manuale utente
Page | 1
Please read this manual thoroughly before operating the unit, and keep it for further reference.
Page | 2
Table of contents
Precautions...........................................................................................................................................3
Maintenance.........................................................................................................................................4
Parts Identification................................................................................................................................5
Features.................................................................................................................................................5
Technical Specifications........................................................................................................................6
Diagram.................................................................................................................................................6
Accessories............................................................................................................................................7
Remote Control Operation...................................................................................................................7
Page | 3
Precautions
Storage and keeping
Do not expose the monitor to excessive heat or cold. The storage temperature of this device is -30 ~+80℃, and
the operating temperature is -10 ~+65℃. The Humidity is Rh 90%.
Avoid dropping or striking this device.
Avoid using this device in enclosed spaces, areas with excessive vibration or subject to severe impacts.
Never puncture, scratch or use abrasive cleaning materials on this device.
Do not place cables where they may be pinched or stepped on.
Leave at least a 2”space between the monitor and walls, cabinets or other objects to allow adequate air
circulation around the unit.
The monitor is designed to be waterproof.
Operating Precautions
The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system.
Make sure all cables are connected properly observe polarity. Improper cable connections may damage the
monitor. Remove the power cable connections when you do not intend to use the unit.
Page | 4
Maintenance
1. Remove all the cable connections from the monitor before cleaning the unit.
2. Use a mild household detergent and clean the unit with a slightly damp, soft cloth. Never use strong solvents such
as thinner or benzene, as they might damage the device.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
This symbol is intended to alert the user not to waste electrical and electronic equipment.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your
warrantee and necessitate expensive repairs.
Declaration of conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1）This device may not cause harmful interference.
(2）This device must accept any interference received, including Interfered that may cause under sired operation.
Page | 5
Parts Identification
1) Decrease button –For adjusting of Volume, Brightness, Contrast, Language, Rotation, etc.
2) Increase button –For adjusting of Volume, Brightness, Contrast, Language, Rotation, etc.
3) MENU –Access Brightness, Contrast, Language, Rotation, etc.
4) CAM –Switches between all cameras Connected to Monitor.
5) MODE –Selects Single View/Split view/Quad view selectable
6) POWER –Turns monitor On and Off.
Product Features
1. TFT LCD monitor with wide angle view and high-resolution display.
2. Picture image may be adjusted for Horizontal, Vertical, Mirror and Normal viewing.
3. Select from 7 languages for user operation.
4. Mirror and Normal switch available.
5. Full-function remote control.
6. Multiple video formats available: PAL / AUTO / NTSC.
7. Up to 2 or 4 AV inputs. Automatically switch to back-up camera views.
8. Operates from DC / 12-32V. Supports 12V or 24V automobile battery.
Page | 6
Technical Specifications
Diagram
RED WIRE - ACC DC 12V~24V
BLACK WIRE - Ground
GREEN WIRE - Trigger wire (Connect to positive end of reversing light. DC12~24V)
BLUE WIRE - Trigger wire (Connect to positive end of reversing light. DC12~24V)
WHITE WIRE - Trigger wire (Connect to positive end of reversing light. DC12~24V)
YELLO WIRE - Trigger wire (Connect to positive end of reversing light. DC12~24V)
Monitor
7” Colour Waterproof Monitor
Power supply:
Automobile storage battery (12-24V).
Power consumption:
4W Maximum
Outer dimension:
200（L) X 42.5 (W) X 145 (H) mm
Resolution:
800 X 3 X（RGB）X 480
Contrast:
500:1
Brightness:
400cd/㎡.
Viewing angle:
U: 50°/ D: 60°, R/L: 70°
Operating temperature:
-10℃~+65℃
Storage temperature:
-30℃to + 80℃RH90%
Video Inputs:
4CH
Waterproof Rating:
IP69
Page | 7
Accessories
Remote Control
Indice
Altri manuali Elinz Accessori per automobili
