Elite Security Products Aperta APWIFIDSBP Manuale utente
Battery Powered Wi-Fi Door Station
APWIFIDSBP (Silver) APWIFIDSBLKBP (Black)
www.espuk.com
APWIFIDSBP Manual.indd 1 21/09/2017 08:51:09
Page 2
System Overview
DOXX-123456-ABCDE
Sunshade Mounting
Bracket
HD Camera with
IR-Cut
Weather Resistant
Speaker
Push Button
Microphone
Reset Button
I/O Pin Connector
Memory Card Slot
1. AC/DC: Power Input I/O
2. O2/O1: Wet Contact I/O for door unlock trigger
3. B2/B1: Dry Contact I/O for wired door chime trigger
4. B2/B1: Dry Contact I/O for motorized gate control
APWIFIDSBP Manual.indd 2 21/09/2017 08:51:09
Page 3
Connections
Optional Power Connection
Requires
9V-36V, 600mA
Power Source
Output for Lock
(Volt-free)
Output for Doorbell
(Volt-free)
N.O
N.O
COM
COM
Volt-free switch for lock release mechanism
Existing Bell Wiring
APWIFIDSBP Manual.indd 3 21/09/2017 08:51:09
Page 4
EVBPSBB
Lock Power Supply
ENTERD
Electric Lock
EV-EXIT
Push to Release
EV-EBG
Emergency Release
EV-ML-250/500XT
Electromagnetic Lock
*Note: For remote door unlock function with 12V/1A current output trigger;
The Door station requires a Hardwired power supply and must be a minimum of 15V 1.5A.
Optional Accessories
Connections
Output for
Lock
+
-
APWIFIDSBP Manual.indd 4 21/09/2017 08:51:10
Page 5
It is strongly recommended APP & registration is complete prior to fixing the installation.
Door Station Installation
Step 1
Fasten the weather-seal cover
Step 2
Confirm position and mount the bracket with 3 screws
Step 3
Place the device on the mounting bracket
Step 4
Fasten the anti-theft screw.
APWIFIDSBP Manual.indd 5 21/09/2017 08:51:10
Page 6
APP Download and System Setup
Insert Batteries
Download and install the ”ESP Aperta BP” APP to your device.
1. Unscrew the battery compartment screw .
2. Insert the batteries supplied. Make sure the polarity is as indicated.
3. After the batteries are inserted, the Push Button illuminator will begin to flash,
indicating set up mode.
(3)
(1)
(2)
Reset
DOXX-123456-ABCDE
Note: If the illuminator is not lighted,
press/hold the Reset Button for 5 seconds
until the illuminator lights up and flash
APWIFIDSBP Manual.indd 6 21/09/2017 08:51:13
Page 7
APP Setup
Please ensure the following;
1. The user’s smart-phone is connected to the Wi-Fi network.
2. The Door Station is within the network’s Wi-Fi range.
3. The network’s key/password is available.
The door station’s call button will be flashing, launch the APP & select
‘add new system’ or begin set up on next page.
1. .
2.
APWIFIDSBP Manual.indd 7 21/09/2017 08:51:13
Page 8
DOXX-123456-ABCDE
3.
Select ‘Scan DID Label’, the label is at the rear of the door station.
(Note; DID; Device ID)
Enter a System Name (User defined).
Enter the default security code ‘123456’ & select ‘Save’
EXAMPLE123123
4.
APP Setup
APWIFIDSBP Manual.indd 8 21/09/2017 08:51:14
Page 9
APP Setup
If using Android platform please follow the steps below before
moving to page 13 .
For i-Phone please follow the additional steps on page 10.
Select ‘SETUP’ on Wi-Fi Setup & Follow the on screen instructions
1.
2. 3.
APWIFIDSBP Manual.indd 9 21/09/2017 08:51:15
Page 10
Additional I-Phone Set up (Page 1/3)
If using android platform please continue to page 13.
If using i-Phone please follow additional steps.
1. 2.
3.
Select ‘Setup’
Enter the network password
Ensure correct network is selected
APWIFIDSBP Manual.indd 10 21/09/2017 08:51:16
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Elite Security Products Sistema di interfono
