Elite Technology ET Series Manuale utente

Elite Technology

ET Series DVR

User Guide

Electronics Line Site (DVR)

Electronics Line Center (Remote)

Contents

Electronics Line Site

•Main Screen 5

•Entering Setup mode 9

•Hardware Setup 10

oCamera Setup 11

oSensor Setup 13

oControl Setup 14

oExternal Monitor 16

•Motion Setup 17

oSetup for Individual Cameras 17

oSetup for All Cameras 21

•Schedule Setup 23

oRecord Modes 23

oHow to set schedule 24

oSet Holiday 26

oSimple / Advanced Mode 27

•Screen Division 28

•Modem Setup 29

oUsing the “Ping” utility 32

oConfiguring the modem 35

•Site Information 41

•Password Setup 46

•Audio Setup 48

oMicrophone and Speaker Setup 49

•System Setup 55

oBackup Settings 56

oCreating a Backup Schedule 58

oAdding Backup Media 60

oRemote Backup Media 61

oEasy Update 64

•Motion Tracking Setup 68

•Storage Setup 72

•E-Map Setup 74

oCamera 76

oControl 77

oSensor 78

•Pan Tilt Zoom Control 80

Contents

Electronics Line Site

•Search Mode 82

oCalendar 82

oRecorded Data Timeline 84

oStill Image Tools 85

oSearch Tools 86

oPlayback Controls 87

oIndex Search 88

oSearch Option Panel 89

oPrinting an Image 90

Installing a local Printer 91

Installing a Network printer 93

oBackup 94

Floppy Backup 95

Watermark Checker 95

Time Backup 96

AVI Backup 97

Select Media 98

oFormatting CD-R/CD-RW disks 100

Main Screen

Screen Division Selections

Select the number of cameras you wish to view on the main screen.

Choose 4, 6, 9, 10, 13, or 16 camera splits

The cameras that will appear in each view are assignable in setup under “Screen Division”

Full Screen View

This button will set the main screen to “Camera only” view. The GUI (Graphic User

Interface) which includes the Screen Division buttons, the Event Indicators, the Clock,

Setup and Search buttons, Power button, etc. will be hidden.

Right click on the screen to return to normal view.

Camera, Sensor, and Control Relay Event Indicators

Each numbered button corresponds to the similarly numbered device in each category.

Camera indicators will flash when a camera detects motion. Sensor indicators will flash

when a device (Glass break or motion detector) is tripped.

Control indicators will flash when a relay (Alarm, siren, strobe, etc.) has been activated.

Control relays may also be manually activated by left clicking on the indicator. Click on it

again to deactivate.

Screen

Division

Selections

Camera, Sensor,

and Control

Relay Event

Indicators

Full

Screen

View

Main Screen

Clock

Indicates current date and time

Quad Rotation Mode

Sets main view to 4 camera split and rotates view continuously through all active cameras

starting with 1~4, then 5~8, then 9~12, then 13~16, then back to 1~4, etc.

Click on an image, or select a Screen division button to stop rotation and return to normal

mode.

Setup and Search Mode

Left click to enter Setup (Camera selection, Screen division, Schedule, Audio, Motion, etc.)

or Search Mode (Review and backup recorded data)

Storage Indicator

Top line shows total Hard Drive space allocated and available for data storage.

Numbers in the blue box show Hard Drive space that has been used for data storage in

Megabytes and Percentage of free space remaining. When percentage of free space reaches

0%, the DVR has used all available storage and will begin to overwrite (replace) the oldest

recorded data.

(It is normal for the ‘Free Space’ indicator to read ‘0% Free’ once the DVR has started

overwriting the oldest data. This number will not change unless you reallocate (erase) the

storage drive.)

Clock

Quad

Rotation

Mode

Setup and

Mode

Storage

Indicator

Main Screen

Main View Screen

This is where the live images from your cameras will appear.

Left click on any image to bring it to full screen view. Left click on the image again to

return to normal view.

Mode Indicator

Mode indicator will indicate whether you are in Display, Search, or Pan /Tilt mode.

Power Button

Left click on the power button in Display mode to turn off the DVR.

Unit will stop recording and turn itself off. Use the Power switch (on the front of the DVR)

to restart the unit.

Main View

Screen

Mode

Indicator

Power

Button

Setup

Your new Elite Technology ET-Series DVR is “Ready to Go” right out of the box.

It is factory preset to start up and begin recording data without any effort on your part.

Just hook up your cameras and turn it on.

In order to fine tune your installation and customize the DVR to get the best performance

for your particular situation, or to setup extra features such as Pan/Tilt/Zoom cameras,

Sensors and Control relays, Record mode quality and scheduling, Custom screen divisions,

etc., the Elite Technology ET-Series is equipped with an extensive array of options

available through the “Setup” mode.

Left click on the “Setup” button to enter Setup mode.

Left click

to enter

Setup

When you click on setup for the first time you will be prompted to enter a

password.

Leave the user level set to Level 1 (Administrator) and use the keyboard to enter a 4 digit

numeric password (4 characters, all numbers). You may left click on the numbers on the

‘Virtual Keypad’ if no keyboard is available.

You may also press “Enter” on your keyboard or click on “OK” with the left mouse button

if you want no password set up at this time. (You can change this later in the “Password

Setup” section.)

You will then be asked if you want to create the default user database.

Click on “Yes” or press “Enter” on your keyboard to continue.

You will then be prompted to “Confirm” or, re-enter your password again to gain entry to

Setup mode.

Remember your password!

Once you have created the password database you will not be able to access Setup or

Search mode without it.

Virtual

Keypad

Hardware Setup

When you enter Setup mode you can access all of the functions of the DVR and customize

settings for your installation to achieve the best performance of your unit in any

environment.

Most key functions (Camera types, color settings, motion settings, frame rates, etc.) can be

set up on an individual camera by camera basis.

The Setup mode is organized on several “Pages” accessed by the tabs at the top of the

panel. Left click with the mouse on any tab to access that page. The first page that appears

is the “Hardware Setup” page.

Click on a tab to

select a Setup Page

Indice

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente