Elite EBL-1000 Manuale utente

LIMITED WARRANTY* ONE (1) YEAR:

Your small kitchen appliance is warranted to the original purchaser to be free from any manufacturing

defects under normal use and conditions for one (1) year, cord excluded. During that period, should the

appliance fail to operate properly, return the appliance with your sales receipt to the store where

purchased. If you use your appliance for household use and according to instructions, it should give you

years of satisfactory service. This product warranty covers only the original consumer purchaser of the

product.

WARRANTY IS ONLY VALID WITH A DATED PROOF OF PURCHASE.

To guarantee repair or replace without charge, a dated sales receipt showing purchase within the limited

warranty period* must accompany the appliance. Without a sales receipt, warranty will be estimated

according to the appliance's manufactured date. A comparable appliance should arrive within 2-3 weeks.

However, in case an appliance is not covered by warranty, correspondence offering alternatives will be

mailed to you.

During the one-year warranty period, a product with a defect will be either repaired or replaced with a

reconditioned comparable model (at our option) when the product is returned to our Service Center. (See

the “Returns” section below). The repaired or replacement product will be in warranty for the remaining

balance of the one-year warranty period and an additional one-month period.

This limited warranty covers appliances purchased and used within the 50 contiguous states plus

the District of Columbia and does NOT cover:

- Damages caused by unreasonable use, neglect, normal wear and tear, commercial use, improper

assembly or installation of product.

- Damages caused in shipping.

- Damages caused by replacement or resetting of house fuses or circuit breakers.

- Defects other than manufacturing defects.

- Breakage caused by misuse, abuse, accident, alteration, lack of proper care and maintenance, or

incorrect current or voltage.

- Lost or missing parts of the product. Parts will need to be purchased separately.

- Damages of parts that are not electrical; for example: cracked or broken plastic or glass.

- Damage from service or repair by unauthorized personnel.

- Extended warranties purchased via a separate company or reseller.

- Consumer’s remorse is not an acceptable reason to return a product to our Service Center.

*The consumer is responsible for any delivery charges for all replacement units provided for exchange

under the warranty.

RETURNS: Any return of defective merchandise to the manufacturer must be processed accordingly by

contacting customer service first to obtain an RA # (Return Authorization Number). We will not accept any

returns of merchandise without an applicable RA #.

We cannot assume responsibility for loss or damages to products returned to us during incoming shipment.

For your protection, always carefully package the product for shipment and insure it with the carrier. Be

sure to enclose the following items with your return: any accessories related to the problem, your full

address and daytime phone number, a note describing the problem, a copy of the dated sales receipt or

other proof of purchase and a valid RA#.

C.O.D shipments cannot be accepted.

*One Year Limited Warranty valid only in the 50 contiguous states plus the District of Columbia,

excluding Puerto Rico and the Virgin Islands.

This warranty is effective only if the product is purchased and operated in the USA; product usage which is

in violation of the written instructions provided with the unit will void this warranty.

For international warranty, please contact the local distributor.

**Any instruction or policy included in this manual may be subject to change at any time.

Model EBL-1000 Elite Cuisine®10 Speed Blender with 48oz. Shatter-Proof Jar

MAXI-MATIC®, USA

18401 E. Arenth Ave. City of Industry, CA 91748

Customer Service Dept: (626) 912-9877 Ext: 120 MON-FRI 9am-5pm PST

Email: info@maxi-matic.com Website: www.maxi-matic.com

10 Speed Blender

with 48oz. Shatter-Proof Jar

Model EBL-1000

INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE.

WARNING—To avoid the risk of electrical shock, always make sure the product is

unplugged from the electrical outlet before assembling, disassembling, relocating,

servicing, or cleaning it.

WARNING-To reduce the risk of fire, electric shock, or serious personal injury:

Always unplug the product from the electrical outlet before relocating, servicing, or

cleaning it.

Do not plug/unplug the product into/from the electrical outlet with a wet hand.

Do not operate the product if the power cord is cut, damaged, or if the wires are

exposed.

Keep the power cord and product away from heated surfaces, including stovetops.

Do not immerse in or expose the base, power cord, or plug to water or other liquids.

Do not attempt to open any part of the base.

To disconnect the product from an electrical outlet, pull directly on the plug; do not

pull on the power cord.

Do not put any stress on the power cord where it connects to the product, as the

power cord could fray and break.

If using an extension cord with this product, the marked electrical rating of the cord

set or extension cord must be at least as great as the electrical rating of the product.

Keep hands and utensils out of container while blending. A scraper may be used

but only when the blender is not running.

Do not operate the product if it has a damaged power cord or plug, malfunctions, or

is dropped or damaged. This product has no user-serviceable parts. Do not attempt

to examine or repair this product yourself. Only qualified service personnel should

perform any servicing; take the product to the appliance repair shop of your choice

for inspection and repair.

CAUTION-- To reduce the risk of personal injury or product/property damage:

This product is intended for use in blending food products; do not use the product for

any other purpose.

Keep the product out of the reach of children and pets. This product is not intended

for use by children.

Do not leave the product unattended while it is in use, especially when children are

present. Extra caution is necessary when using this product near children. Always

unplug the product from the electrical outlet when it is not in use.

Do not use attachments not recommended or not sold by the manufacturer or it may

cause risk of injury to persons.

This product contains exposed sharp metal blades. Use extreme caution when

handling.

Avoid contact with moving parts.

Always operate blender with cover in place.

Always operate the product on a flat, level, stable surface to avoid overturning it.

Ensure the product is off before adding or removing parts. Do not attempt to place the

jar onto the Base while the motor is running. Do not attempt to remove the jar from the

Base while the motor is running.

Correctly attach the blade assembly to the jar before putting the jar onto the Base.

To reduce the risk of injury, never place the cutter-assembly blades onto the base

without jar properly attached.

After operating continuously for three minutes, wait at least one minute before

operating the product again to help prevent the motor from overheating.

Do not run motor while jar is empty.

This product is intended for indoor, non-commercial, non-industrial, household use

only. Do not use outdoors.

Do not let cord hang over the edge of a table or counter.

This product uses a short power cord to reduce the risk of personal injury resulting

from becoming entangled in or tripping over a longer cord.

WARNING: This product is equipped with a polarized plug (one blade is wider than the

other blade) to reduce the risk of electrical shock. This is a safety feature. The plug will

fit into a polarized outlet only one way. If you are unable to insert the plug into the

electrical outlet, try reversing the plug. If the plug still does not fit, contact a qualified

electrician. Never use the plug with an extension cord unless you can fully insert the

plug into the extension cord. Do not alter the plug. Do not attempt to defeat the safety

purpose of the polarized plug.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

PARTS INDICATOR

To Assemble

WARNING: To avoid damage to the product or serious personal injury:

Do not activate or plug the product into an electrical outlet until the product is

completely assembled.

The Blades of the product are very sharp; handle with care.

1. Ensure the product is unplugged from the electrical outlet.

2. Place the Motor Housing on a flat, stable surface.

3. Wash and dry the Jar.

4. Ensure the Plastic Ring is attached around the Spin Base.

5. Insert the Blades and Spin Base into the bottom of the Jar and turn clockwise (follow

the arrows inscribed on the bottom of the Spin Base) until the plastic latches of the

Jar bottom and the Spin Base lock into place.

6. Place the Jar onto the Motor Housing ensure the Motor Drive Coupling and the

fittings located on top of the Motor Housing are aligned.

7. Twist the Jar counterclockwise until the plastic latches of the Jar and the Motor

Housing lock into place.

NOTE: Ensure the arrow below the Jar handle is aligned with the arrow below the

plastic latch of the Motor Housing.

8. Place the Plastic Lid on top of the Jar and secure it into position.

NOTE: The Jar handle has a slide release mechanism to hold the Plastic Lid to the

Jar. Make sure the Plastic Lid is always securely in place on top of the Jar before

operating the product.

HOW TO USE

1. Wash the ingredients you want to blend and cut them into pieces small enough to fit

into the Plastic Lid Feeding Hole.

2. Once cleaned and cut, add the ingredients into the blender through the Plastic Lid

Feeding Hole.

NOTE: The Jar has a six cup (48 oz. / 1.5 liter) capacity. Do not overload the Jar

with ingredients.

3. After filling the Jar with ingredients, secure the Plastic Lid with Feeding Hole into

position. Plug the product into a standard 120-volt AC electrical outlet.

4. Push the desired blender speed button (e.g., CHOP, PUREE).

CAUTION: Never operate the product’s motor for more than a few minutes at a time.

Select and depress a blender speed button, allow the motor to cool for a few seconds;

then press the blender speed button again until you achieve the desired results.

5. To turn off the product, press the “OFF” Button on the 10-Speed Control Panel.

6. Unplug the product from the electrical outlet when finished blending ingredients,

when the product is not in use, or if leaving it unattended.

CAUTION: Do not use the product for blending heavy foods or thick mixtures.

NOTE: The PULSE Button can be used for more control during short processing jobs to

run the blender motor at a high speed. When finished processing ingredients with the

PULSE Button feature, release the PULSE Button to turn off the product.

1. Plastic Lid with Feeding Hole

2. 48oz. Jar

3. Plastic Ring

4. Blades and Spin Base

5. Motor Drive Coupling

6. Motor Housing

7. 10-Speed Panel Control

CARE & MAINTENANCE

WARNING: Always unplug the product from the electrical outlet before assembling,

disassembling, or cleaning it.

If the product’s motor does not run freely while blending ingredients, perform one or

more of the following steps, as necessary:

oPress the OFF Button and add water to the ingredients

oPress the PULSE Button for a few minutes and the motor blends freely

oPress the OFF Button, unplug the blender from the electrical outlet and use

a rubber spatula to clear the sides of the Jar and push the ingredients

toward the Blades

oReduce the amount of ingredients inside of the Jar

Clean the product immediately after each use. Before cleaning and putting your

hands and fingers inside of the Jar, remove the Jar from the Motor Housing and the

Plastic Lid, Blades and Spin Base from the Plastic Jar.

Use a small toothbrush (not included) to remove particles of food lodged underneath

the Blades.

Clean the exterior surface of the Motor Housing by wiping it with a soft, damp cloth.

Do not use abrasive cleaners or scouring pads to clean the product.

To clean the Jar, add ¼ teaspoon of liquid soap to the Jar and fill with warm water.

Place the Jar on the Motor Housing and press the PULSE Button several times for a

few seconds. Remove the Jar from the Motor Housing and rinse the Jar underneath

running water.

CAUTION: Do not place the Jar and the Plastic Lid into a dishwasher or extremely

hot water.

Dry all product parts thoroughly before storing.

Store the product in a clean, dry place with the Plastic Lid removed from the Jar.

CLEANING

1) Make sure the blender is unplugged.

2) Remove the cutting unit assembly. Handle with care, blades are sharp.

3) Wash the cover, jar, gasket, blades and retaining ring in hot soapy water.

4) Rinse and dry.

5) Reassemble the parts. Store away with the cover ajar to prevent container odor.

TIPS

1) If blending action stops at any time, immediately turn the unit OFF. Remove the

cover and use a rubber spatula or wooden spoon to push the mixture toward the

blades. Replace the cover and continue blending process.

2) Do not store food in the blender jar.

3) This blender does not mash potatoes, whip cream, mix stiff dough or grind

meats.

Indice

Altri manuali Elite Miscelatore

Elite

Elite EBL-2000G Manuale utente

Manuali Miscelatore popolari di altre marche

ROTOR

ROTOR 1125.201 Manuale utente

Braun

Braun Multiquick 5 Vario series Manuale utente

ARENDO

ARENDO MIRA 305424 Manuale utente

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuale utente

Viconte

Viconte VC-4406 Manuale utente

Oster

Oster BLSTAB-CB0 Manuale utente

HOFFEN

HOFFEN MC-3005 Manuale utente

Black & Decker

Black & Decker BLC18750DM Manuale utente

Sunbeam

Sunbeam 4182 Manuale utente

Bialetti

Bialetti FMX35 Manuale utente

Black & Decker

Black & Decker BL8000 Manuale utente

Duronic

Duronic BL530 Manuale utente

Exquisit

Exquisit MS 3002 wes Manuale utente

Lumme

Lumme LU-KP1891A Manuale utente

Binatone

Binatone HB-735 Manuale utente

Moulinex

Moulinex LM936E10 Manuale utente

Oster

Oster VERSA Manuale di installazione e funzionamento

Ninja

Ninja NN210Q Manuale utente