A
E
To route your cable from the cable case
which inside of the Fold arm(A) and the
cable clip(E) for a tidy look.
STEP 4
D
E
F
STEP 3
B
A
4
2
1
3
Installing LCD Mount(B) to Fold arm(A).
8
6
3
4
7
C
E
D
STEP 1
5
A
C
STEP 2
Put the Fold arm(A) through the Tube(C).
To adjust the height of Fold arm(A)
with Allen wrench(7).
Assembly step
Installing Tube(C) on the base(D) and
then put on the Cable clip(E) on
the tube for cable management.
Fixed the brake screw(5) with Allen
wrench(6) to avoid rotation of the tube.
Answer:
Please follow steps below to set the tilting angle
Use a flat-blade screwdriver
to push open the caps.
2.
1.
Locate the two caps which
are on each side of the axis
of the monitor bracket.
3.
Loosen the nut adjust
the tilting angle then
tighten the nutadain.
loose
tighten
WRENCH NO.13
30
90
1.
2.
SCREWDRIVER
Why my monitors keep flopping?
