Elko SmartSensor Manuale utente
SmartSensor Leakage Wireless
Device User Guide
Commissioning instructions for the ELKO Smart system, devices and app.
02/2023
www.elko.no
Legal Information
The ELKO brand and any trademarks of ELKO AS and its subsidiaries referred to in
this guide are the property of ELKO AS or its subsidiaries. All other brands may be
trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and
furnished for informational use only. No part of this guide may be reproduced or
transmitted in any form or by any means (electronic, mechanical, photocopying,
recording, or otherwise), for any purpose, without the prior written permission of
ELKO.
ELKO does not grant any right or license for commercial use of the guide or its
content, except for a non-exclusive and personal license to consult it on an "as
is" basis. ELKO products and equipment should be installed, operated,
serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information
contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
ELKO and its subsidiaries for any errors or omissions in the informational content of
this material or consequences arising out of or resulting from the use of the
information contained herein.
Table of Contents
Safety information.......................................................................................4
SmartSensor Leakage Wireless...............................................................5
About the device.........................................................................................5
Installing the device ....................................................................................5
Pairing the device .......................................................................................5
Pairing device manually.........................................................................6
Pairing device with auto scan.................................................................8
Configuring the device ................................................................................9
Changing the device icon ......................................................................9
Renaming the device ..........................................................................10
Changing the device location ...............................................................10
Removing the device ................................................................................ 11
Resetting the device ................................................................................. 11
Using the device.......................................................................................12
Checking the device history .................................................................12
Creating an automation .......................................................................13
Replacing the batteries........................................................................17
LED Indications ..................................................................................17
Troubleshooting..................................................................................18
Technical data ....................................................................................18
DUG_Sensor Leakage Wireless_ELKO-00 3
Safety information
Safety information
Important information
Read these instructions carefully and look at the equipment to become familiar
with the device before trying to install, operate, service, or maintain it. The
following special messages may appear throughout this manual or on the
equipment to warn of potential hazards or to call attention to information that
clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates
that an electrical hazard exists which will result in personal injury if the
instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that accompany this symbol to avoid possible
injury or death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
Failure to follow these instructions will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
4 DUG_Sensor Leakage Wireless_ELKO-00
SmartSensor Leakage Wireless
SmartSensor Leakage Wireless
EKO07218
About the device
The SmartSensor Leakage Wireless (hereinafter referred to as Water Leakage
Sensor) has two sensing pads at the bottom of the body that activates when water
is present between the pads. The pads are close to the floor surface when the
sensor is placed in its operating position.
When the sensor is connected to the ELKO SmartHUB and detects water on the
floor, the sensor sends out a sound alarm and reports the event to the app via
ELKO SmartHUB. The sound alarm stops when the sensor is removed from the
water contact.
TIP: The water leakage sensor will sound an alarm even if it is not connected
to the ELKO SmartHUB.
Operating elements
A. Status LED
B. Function key
C. Sensing pads
D. Battery cover screws
B
C
D
A
Installing the device
Refer to the installation instruction supplied with this product.
See SmartSensor Leakage Wireless.
Pairing the device
Using the ELKO Smart app, pair your device with the ELKO SmartHUB to access
and control the device. You can either add the device manually or do an auto-scan
to pair it.
DUG_Sensor Leakage Wireless_ELKO-00 5
SmartSensor Leakage Wireless
Pairing device manually
To pair the device manually:
1. On Home page, tap +.
2. Tap , select the required ELKO SmartHUB on the slide-up menu.
3. Select an option to add the device(A):
–Add Device with Install Code
–Add Device without Install Code
Add Device
Install Code is Recommended
Add Device without Install Code
A
TIP: It is highly recommended to add the device with install code.
4. To pair the device with an install code, tap Add Device with Install Code to
display the slide-up menu. Select any one of the options (B):
–Scan Install Code - you can scan the device for the install code.
–Enter Install Code Manually - you can manually enter the install code
from the device.
After pairing the device with install code, proceed to Step 6.
Add Device
Install Code is Recommended
Add Device without Install Code
Add Device
Install Code is Recommended
B
5. To pair the device without install code, tap Add Device without Install Code.
6 DUG_Sensor Leakage Wireless_ELKO-00
SmartSensor Leakage Wireless
6. On the rear side of the sensor, short press (< 0,5 s) the function key 3 times
on the device.
3× < 0,5 s
↓
The LED blinks orange.
7. In the app, select Confirm LED is Flashing Orange and tap Start
Configuration (C).
Cancel
How to pair device
Short-press function key 3 times.
1 2
3
C
8. After a few seconds, a solid green LED indicates that the device has been
successfully paired to the ELKO SmartHUB.
…
9. Tap Done when the pairing is successful.
DUG_Sensor Leakage Wireless_ELKO-00 7
SmartSensor Leakage Wireless
Pairing device with auto scan
Pairing the device with auto scan automatically discovers the device when the
corresponding device is powered on.
1. On the Home page, tap +.
2. Tap Auto scan > Confirm.
3. Enable permissions to Access location and Wi-Fi for scanning device and
tap Start scanning.
NOTE: If you have multiple hubs, do Step 4 or proceed to Step 5.
4. Tap Select hub and select the ELKO SmartHUB from the slide-up menu.
5. Short press the setup/reset button 3 times (< 0,5 s) and wait for a few
seconds until the device search is complete.
The LED blinks orange.
TIP: If you want to pair multiple devices at once, perform step 5 on each
device and wait for a few seconds for them to be detected.
6. Tap Next (A) and select Water Leakage Sensor.
Auto Scan
Available devices found
Next A
Water
sensor
7. Once the device is added successfully, tap Done.
8 DUG_Sensor Leakage Wireless_ELKO-00
SmartSensor Leakage Wireless
Configuring the device
Changing the device icon
You can change the device icon using the ELKO Smart app.
1. On the Home page, select the device for which you wish to change the icon.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name.
4. Tap Icon to view the menu.
5. In the slide-up menu, select any one of the following (A) to change the device
icon:
–Take photo - allows you to click a photo from the mobile camera.
–Select from Icon Library - allows you to select an icon from the app
library.
–Select from Album - allows you to select a photo from the mobile gallery.
DUG_Sensor Leakage Wireless_ELKO-00 9
SmartSensor Leakage Wireless
Renaming the device
You can rename the device using the ELKO Smart app.
1. On the Home page, select the device for which you wish to rename.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name.
4. Tap Name, enter the new name (A) and then tap Save.
Name
Name
Save
Rename
A
Changing the device location
You can change the device location using the ELKO Smart app.
1. On the Home page, select the device for which you wish to change the
location.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name.
4. Tap Location.
5. Select the desired location from the list (A) and then tap Save.
Device location Save
Living Room
Dining Room
Kids Room
Study Room
Master Bedroom
A
10 DUG_Sensor Leakage Wireless_ELKO-00
Indice
Altri manuali Elko Accessori
Elko
Elko iNELS Air AirSOU-100S Manuale utente
Elko
Elko AirMD-100NB Manuale utente
Elko
Elko Inels AirQS-101S Manuale utente
Elko
Elko inels RFDSC-71 Manuale utente
Elko
Elko iNels RFSC-11 Manuale utente
Elko
Elko iNels RFSC-61N Manuale utente
Elko
Elko Inels RFDSC-71 Manuale utente
Elko
Elko Inels RFDSC-71 Manuale utente
Elko
Elko inelsAir AirSOU-100NB Manuale utente
Elko
Elko Inels RFDSC-11 Manuale utente
Elko
Elko iNELS Air AirQS-101 Manuale utente
Elko
Elko iNELS Air AirCFS-100NB Manuale utente
Elko
Elko iNELS Air AirIM-100NB Manuale utente
Elko
Elko SmartSensor Leakage Wireless Manuale utente
Elko
Elko iNELS RFDSC-71 Manuale utente
Elko
Elko RFWB-20/G Manuale utente
Elko
Elko iNels RFDSC-71N Manuale utente
Elko
Elko SmartDim Puck Uni Manuale utente
Elko
Elko Inels RFSC-11 Manuale utente
Elko
Elko iNels RFDSC-71N Manuale utente
Manuali Accessori popolari di altre marche
IFM Electronic
IFM Electronic Efector 250 Series Guida di riferimento
DigiDesign
DigiDesign 888/24 I/O Manuale utente
PROZIS
PROZIS QUAY Manuale utente
patagonia
patagonia PSI Vest Manuale utente
SFC Energy
SFC Energy EFOY GO! Manuale utente
Axminster
Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente