Elo TouchSystems ET1587C Manuale utente

Service Manual

Entuitive Touchmonitor

ET1587C/1787C/1987C/1788C/1988C/1545C/1745C/1945C/1985C

Chassis Family No.ET15,17,19

CONTENTS

1.REGULATORY INFORMATION..........................................................................1

2.INTRODUCTION...................................................................................................3

3.TOUCH TECHNOLOGY.......................................................................................3

4.TOUCHMONITOR SAFETY.................................................................................4

5.TECHNICAL SPECIFICATIONS..........................................................................4

6.INSTALLATION AND SETUP..............................................................................9

7.OPERATION..........................................................................................................13

8.ABOUT MONITOR ADJUSTMENTS ...................................................................16

9.MONITOR INSPECTION STANDARDS .............................................................27

10.CAUTION FOR SERVICING..............................................................................34

11.BLOCK DIAGRAM..............................................................................................35

12.TROUBLE SHOOTING CHART..........................................................................37

13.SERVICE COMPONENTS ..................................................................................52

14.ET15 PARTS LIST................................................................................................53

15.ET17 PARTS LIST................................................................................................71

16.ET19 PARTS LIST................................................................................................128

17.SPARE PARTS APPLICATION...........................................................................195

Elo TouchSystems Elo Document : ES500144 Rev. : G / Apr.20,2004

- 1-

REGULATORY INFORMATION

1.Electrical Safety Information

1.1 Compliance is required with respect to the voltage, frequency, and current

requirements indicated on the manufacturer’s label. Connection to a different

power source than those specified herein will likely result in improper operation or

damage to the equipment, or may pose a fire hazard if the limitations are exceeded.

1.2 There are no operator serviceable parts inside this equipment. This equipment

generates hazardous voltages that constitute a safety hazard. Service should be

provided only by a qualified service technician.

1.3 This equipment is provided with a detachable power cord that has an integral

safety ground wire and three-prong connector intended for connection to a

grounded safety outlet.

1.3.1 Do not substitute the cord with any cord other than the provided approved

type. Under no circumstances use an adapter plug to connect to a two-wire

outlet, as this will defeat the continuity of the grounding wire.

1.3.2 This equipment requires the use of the ground wire as a part of its safety

certification. Modification or misuse can provide a shock hazard that can

result in serious injury or death.

1.3.3 If there are any questions about the installation prior to connecting the

equipment to mains power, contact a qualified electrician or the manufacturer.

2.Emissions and Immunity Information

2.1 Notice to Users in the United States: This equipment has been tested and found to

comply with Part 15 Class B of FCC Rules for digital devices. These limits are

designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses , and can radiate radio frequency energy,

and if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

2.2 Notice to Users in Canada: This equipment has been tested and found to comply with

Class B radio noise emission limits as established by the Radio Interference Regulations

of Industries Canada for digital devices.

2.3 Notice to Users in the European Union: This equipment has been tested and found to

comply with the Class B requirements of CE marking for Information Technology

Equipment as require by :Low Voltage Directive 73/23/ECC and standard EN 60950 ;

EMC Directive 89/336/ECC, and per standard EN 55022.

2.4 General Information to All Users: This equipment generates, uses , and can radiate

radio frequency energy. If not installed nad used according to this manual, the

equipment may cause interference with radio and television communications. There is ,

however, no guarantee that interference will not occur in any particular installation due

to site-specific factors.

2.4.1 In order to meet emission and immunity requirements, the user must observe the

following:

2.4.1.1 Use only the provided I/O cables to connect this digital device with any

- 2-

computer.

2.4.1.2 To ensure compliance, use only the provided manufacturer-approved line

cord.

2.4.1.3 The user is cautioned that changes or modifications to the equipment not

expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

2.4.2 If this equipment appears to cause interference with radio or television reception,

or any other device:

2.4.2.1 Verify as an emission source by turning the equipment off and on.

2.4.2.2 If you determine that this equipment is causing the interference, try to

correct the interference by using one or more of the following measures:

•Move the digital device away from the affected receiver.

•Reposition (turn) the digital device with respect to the affected

receiver.

•Reorient the affected receiver’s antenna.

•Plug the digital device into a different AC outlet so the digital device

and the receiver are on different branch circuits.

•Disconnect and remove any I/O cables that the digital device does not

use. (Unterminated I/O cables are a potential source of high RF

emission levels.)

•Plug the digital device into only a grounded outlet receptacle. Do not

use AC adapter plugs. (Removing or cutting the line cord ground may

increase RF emission levels and may also present a lethal shock

hazard to the user.)

If you need additional help , consult your dealer, manufacturer, or an experienced radio

or television technician.

MPR II

DHHS

- 3-

1INTRODUCTION

Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your

new high-resolution touchmonitor combines the reliable performance of Elo’s touch

technology with the latest advances in CRT display design. This combination of features

creates a natural flow of information between a user and the touchmonitor.

1.Precautions

Follow all warnings, precautions and maintenance as recommended in this manual to

maximize the life of your unit. See page 4 B for more information on touchmonitor safety.

2. About the Product

Your CRT touchmonitor is a color display with the following features:

•13.8-inch viewable image 0.28mm dot pitch CDT for 15".

•15.7-inch viewable image 0.27mm dot pitch CDT for 17".

•18-inch viewable image 0.25mm dot pitch CDT for 19".

•Supports a wide range of screen refresh rates with flicker-free picture quality.

•Plug and Play functionality automatically adjusts the monitor to its optimum

performance.

•VESA DPMS (Display Power Management Signaling).

•Patented iTouchtechnology from Elo TouchSystems.

•RS-232 touch interface.

TOUCH TECHNOLOGY

1.Touchscreens: An Overview

Typically, users communicate with computers by using a mouse, a keyboard, or a

combination of the two. Users who are not keyboard-literate or mouse-savvy can become

frustrated with how long human-to-computer interactions take.

Computer literacy is learned. This is complicated by the fact that using a keyboard or a

mouse is neither intuitive nor natural for most people.

Touchscreens cut out the learning curve by eliminating keyboard/mouse intermediaries and

allowing a natural flow of information to develop between a user and a computer.

When a user wants to access information or perform a function on a computer with a

touchscreen installed, a touch quickly and accurately does the job that once required

complicated keyboard interactions or precise mouse movements.

A frustrating experience with a computer during a transaction can create dissatisfaction for

your customer. Touchscreens help eliminate unpleasant transactions by creating a natural

flow of information that enhances your product or service. Touchscreens speed up

user/computer interactions. People get what they want faster and are more satisfied with

the process.

- 4-

2.iTouch Touchscreens

Elo built on its IntelliTouch surface wave technology to create its iTouch "touch-on-tube"

solution. Elo eliminated the clear glass layer between the viewer and the display. iTouch

touchmonitors have been adopted by some of the largest manufacturers in the world in their

next generation games.

Elo CRT gaming monitors offer consistent features across all sizes:

•Touch directly on tube—no touchscreen overlay and no parallax.

•Preserves 100 percent of CRT brightness, clarity, antireflection and color properties.

•More durable and safer than even bonded touchscreen overlays.

•Same fast, accurate, stable performance as Elo’s IntelliTouch surface wave

touchscreen overlays.

•"Drift free" and not affected by surrounding metal or poor earths/grounding.

•Dual touches are not averaged, allowing extremely fast two-handed play.

•Z-axis for pressure can add a new dimension to games.

•No need for periodic recalibration.

TOUCHMONITOR SAFETY

DANGER

As this equipment is received it presents an electrical shock hazard that could result in

serious injury or death. Only qualified persons should work around this equipment when it

is energized. This equipment is intended to be used by a manufacturer only for building-in

to other equipment which will provide a proper electrical and fire safety enclosure.

This manual contains information that is important for the proper setup and maintenance of

your touchmonitor. Before setting up and powering on your new touchmonitor, read

through this manual, especially page 9, Installation and Setup, and page 13, Operation.

1.To reduce the risk of electric shock, follow all safety notices and never insert

conductive metal objects into the circuitry.

2.It is important that your touchmonitor remains dry. Do not pour liquid into or onto your

touchmonitor. If your touchmonitor becomes wet do not attempt to repair it yourself.

3.Your new monitor is equipped with a three-wire, grounding power connector, AMP

"Mate-N-Lock", part number 350767-1. Contacts inside the connector are female type,

AMP part number 350550-1.

Connector Information

Pin 1 Mains line hot monitor (brown)

Pin 2 Mains ground monitor (green)

Pin 3 Mains line neutral monitor (blue)

！

- 5-

Should you wish to construct your own custom power cable, Elo highly recommends

using AMP "Mate-N-Lock" part number 350766-1 and male type contacts, AMP part

number 350547-1.

After connecting the power cable to the monitor, but before applying power, ensure

that the power cable’s black or brown wire connects to the monitor’s brown wire; the

power cable’s green wire connects to the monitor’s green wire; and the power cable’s

white or blue wire connects to the monitor’s blue wire.

Note: The cable used must include a green (earth ground) wire, it must be 18AWG (or

larger), and it should be rated SVT 105C 600V (or better).

TECHNICAL SPECIFICATIONS

1.Touchmonitor Specifications

19"Monitor 17" Monitor 15" Monitor

Picture Tube 19”(18”diagonal viewable

image), 0.25-mm dot pitch. 17”(15.7”diagonal

viewable image), 0.27-mm

dot pitch.

15”(13.8”diagonal

viewable image), 0.28-mm

dot pitch.

Maximum

Resolution 640x350/70Hz

720x400/70Hz

640x480/60, 72, 75, 85HZ

800x600/56,60,72,75,85HZ

1024x768/60, 70, 75, 85Hz

1280x1024/60Hz

Non-interlaced

640x350/70Hz

720x400/70Hz

640x480/60, 72, 75, 85HZ

800x600/56,60,72,75,85HZ

1024x768/60, 70, 75, 85Hz

1280x1024/60Hz

Non-interlaced

640x350/70Hz

720x400/70Hz

640x480/60, 72, 75, 85HZ

800x600/56,60,72,75,85HZ

1024x768/60Hz

Deflection

Frequency Horizontal: 30-70 kHz

Vertical: 50-160 Hz Horizontal: 30-70 kHz

Vertical: 50-160 Hz Horizontal: 30-55 kHz

Vertical: 50-160 Hz

Maximum

Video

Input

Bandwidth

100 MHz 100 MHz 65 MHz

Display Area* H: 350 mm

V: 262 mm H:300 mm

V: 225 mm H: 270 mm

V: 202 mm

Input Signal R.G.B. Analog, 15 pin D-sub R.G.B. Analog, 15 pin D-sub R.G.B. Analog, 15 pin D-sub

Input Voltage 100-240 VAC, 50-60 Hz 100-240 VAC, 50-60 Hz 100-240 VAC, 50-60 Hz

Display

Colors* Analog input; unlimited

colors Analog input; unlimited

colors

Typical Power

Consumption 75 watts 65 watts 60 watts

Power

Management Compliant with EPA/Energy

Star, VESA DPMS signaling

method.

Compliant with EPA/Energy

Star, VESA DPMS signaling

method.

Compliant with EPA/Energy

Star, VESA DPMS signaling

method.

CRT Life Average operational CRT

life is 12,000 hours to half

brightness.

Average operational CRT

life is 12,000 hours to half

brightness.

Average operational CRT

life is 12,000 hours to half

brightness.

- 6-

On-Screen

Adjustments Brightness, Contrast, Exit,

Zoom, V.Si ze, V. Po sition,

H. Size, H. Position,

Language, Save, Recall,

Starus, Degauss, Rotation,

Input Level, OSD, Color

Temperature, Trapezoid,

Parallel, Pin Balance, Top/

Bottom Corner, S/C Correct,

H/V Moire.

Brightness, Contrast, Exit,

Zoom, V.Si ze, V. Po sition,

H. Size, H. Position,

Language, Save, Recall,

Starus, Degauss, Rotation,

Input Level, OSD, Color

Temperature, Trapezoid,

Parallel, Pin Balance, Top/

Bottom Corner, S/C Correct,

H/V Moire.

Brightness, Contrast, Exit,

Zoom, V.Si ze, V. Po sition,

H. Size, H. Position,

Language, Save, Recall,

Starus, Degauss, Rotation,

Input Level, OSD, Color

Temperature, Trapezoid,

Parallel, Pin Balance, Top/

Bottom Corner, S/C Correct,

H/V Moire.

Safety

Regulations cRUus, DHHS, TÜV cRUus, DHHS, TÜV cRUus, DHHS, TÜV

EMC

IC ES-003

C-Tick

VCCI

FCC Class B, CE FCC Class B, CE FCC Class B, CE

Monitor

Dimensions 424w x 440d x 375h 397w x 405d x 343h 424w x 440d x 375h

Net Weight 17.8kg 14.7kg 11.7kg

Operating

Temperature 5-55°C 5-55°C 5-55°C

Humidity 10%-80% 10%-80% 10%-80%

2.iTouch Touchmonitor Specifications

Mechanical

Positional Accuracy

Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%.

Touchpoint Density

More than 100,000 touchpoints/in2(15,500 touchpoints/cm2).

Touch Activation Force

Typically less than 3 ounces (85 grams).

Surface Durability

Surface durability is that of glass, Mohs’hardness rating of 7.

Expected Life

No known wear-out mechanism, as there are no layers, coatings, or moving parts.

Performance

iTouch technology has been operationally tested to more than 50 million touches in

one location without failure, using a stylus similar to a finger.

Sealing

Unit is sealed to protect against splashed liquids, dirt, and dust.

Optical

Light Transmission (per ASTM D1003)

100%

Visual Resolution

All measurements made using USAF 1951 Resolution Chart, under 30X agnification,

with test unit located approximately 1.5 in (38 mm) from surface of resolution chart.

- 7-

Clear surface: Excellent, with no noticeable degradation. Antiglare surface: 6:1

minimum.

Environmental

Chemical Resistance

The active area of the touchscreen is resistant to all chemicals that do not affect glass,

such as:

•Acetone

•Toluene

•Methyl ethyl ketone

•Isopropyl alcohol

•Methyl alcohol

•Ethyl acetate

•Ammonia-based glass cleaners

•Gasoline

•Kerosene

•Vinegar

Electrostatic Protection (per EN 61 000-4-2, 1995)

Meets Level 4 (15 kV air/8 kV contact discharges).

*Dependent on video controller/card used.

NOTE: All specifications are subject to change.

3. Signal PINOUT for 15",17" and 19" Monitors

PIN Number Signal

1. Red video 9. NC

2. Green video 10. Sync return

3. Blue video 11. Ground

4. Ground 12. SDA (Serial Data)

5. *VGA card detection (GND) 13. Horizontal Sync

6. Red return 14. Vertical Sync

7. Green return 15. SCL (Serial Clock)

8. Blue return

*Pin 5, self-test pin shall be grounded when signal connector is plugged in.

5 4 3 2 1

10 9 8 7

15 14 12

13 11

- 8-

4.Power Consumption

The touchmonitor comes with a power-saving feature that controls its power

consumption. This feature complies with both the EPA’s Energy Star

requirements. It also conforms to the Display Power Management System

(DPMS) power-down signaling method approved by the Video Electronics

Standard Association (VESA).

15" Monitor

Mode LED Power

consumption (W)

Normal Green 60

Standby Green/ blinking 15

Suspend Green/ blinking 15

Off Green/ blinking 5

Unplugged Not illuminated 0

17" Monitor

Mode LED Power

consumption (W)

Normal Green 65

Standby Green/ blinking 15

Suspend Green/ blinking 15

Off Green/ blinking 5

Unplugged Not illuminated 0

19" Monitor

Mode LED Power

consumption (W)

Normal Green 75

Standby Green/ blinking 15

Suspend Green/ blinking 15

Off Green/ blinking 5

Unplugged Not illuminated 0

NOTE: The only way to isolate the display unit completely from the mains supply is to unplug the

mains cable.

- 9-

INSTALLATION AND SETUP

This chapter discusses how to install your CRT touchmonitor and how to install Elo TouchSystems driver software.

1.Unpacking Your Touchmonitor

Check that the following 5 items are present and in good condition:

2.Connecting Your Touchmonitor

IMPORTANT: Before connecting the cables to your touchmonitor and PC, be sure that the computer

and touchmonitor are turned off.

Video cable

Connections on underside

Serial touchscreen

cable

Female 15-pin

video

connector

Female 9-pin serial

Touchscreen

connector

Power

CRT Touchmonitor

Serial cable VGA cable

CD Software

Quick Installation

Software

Quick Installation Guide

Guide

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Elo TouchSystems Monitor

Elo TouchSystems

Elo TouchSystems ET1903LM Manuale utente

Elo TouchSystems

Elo TouchSystems ET 1525C Series Manuale utente

Elo TouchSystems

Elo TouchSystems Entuitive 1229L Manuale utente

Elo TouchSystems

Elo TouchSystems IDS 3 Series Manuale utente

Elo TouchSystems

Elo TouchSystems 1000 Series Manuale utente

Elo TouchSystems

Elo TouchSystems IDS 6553L Manuale utente

Elo TouchSystems

Elo TouchSystems Entuitive 2125C Series Manuale utente

Elo TouchSystems

Elo TouchSystems Entuitive 1925L Series Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems ET2294L Manuale utente

Elo TouchSystems

Elo TouchSystems ET2039L Manuale utente

Elo TouchSystems

Elo TouchSystems 2239L Manuale utente

Elo TouchSystems

Elo TouchSystems Entuitive 1747L Series Guida utente

Elo TouchSystems

Elo TouchSystems 5000 Series Manuale utente

Elo TouchSystems

Elo TouchSystems Entuitive ET1X45C-4SWE-1 Series Manuale utente

Elo TouchSystems

Elo TouchSystems ET2200L Manuale utente

Elo TouchSystems

Elo TouchSystems 15A2 for wireless card Manuale utente

Elo TouchSystems

Elo TouchSystems Elo Entuitive 3000 Series 1729L Manuale utente

Elo TouchSystems

Elo TouchSystems Entuitive 1847L Series Manuale utente

Elo TouchSystems

Elo TouchSystems AMM17TK Manuale utente

Elo TouchSystems

Elo TouchSystems ET2200L Manuale utente

Elo TouchSystems

Elo TouchSystems Entuitive 1224L Series Manuale utente

Elo TouchSystems

Elo TouchSystems M467 Istruzioni per l'installazione e il funzionamento

Elo TouchSystems

Elo TouchSystems ET7001LT Manuale utente

Elo TouchSystems

Elo TouchSystems 1519LM Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione