Elo TouchSystems E953516 Manuale utente

INSTALLATION INSTRUCTIONS:

E953516 KIT-EMV-INGENICO ICMP CRADLE-PAYPOINT

E002639 KIT-EMV-VERIFONE E355 CRADLE-PAYPOINT

Pg.1

QIG600028 Rev. B

1- Add payment

module to bracket (1)

2- Add USB cable, route as shown.

3- Add payment module/bracket (1) to bracket (2)

with 2 screws from bag L.

Screws,

INGENICO ICMP

VERIFONE E355

Pg.2

4- Attach payment module assy. to

bracket (3) with 4 screws from bag G. 5- Attach module + bracket (3) using 2

screws from bag K.

Attach module USB cable to computer

accessory port. Use provided USB type A

adapter where needed.

INSTALLATION INSTRUCTIONS:

E953516 KIT-EMV-INGENICO ICMP CRADLE-PAYPOINT

E002639 KIT-EMV-VERIFONE E355 CRADLE-PAYPOINT

QIG600028 Rev. B

INSTALLATION INSTRUCTIONS:

E200788 KIT-EMV-INGENICO ICMP CRADLE-X/IDS02

E201363 KIT-EMV-VERIFONE E355 CRADLE-X/IDS02

Pg.1

1- Add payment

module to bracket (1)

2- Add USB cable, route as shown.

10”/15”/22” landscape = short cable.

15”/22” portrait = long cable.

3- Add payment module/bracket (1) to bracket (2)

with 2 screws from bag C.

Screws,

For X-series, see pg. 2.

For IDS-series, see pg. 3.

INGENICO ICMP

VERIFONE E355

QIG600028 Rev. B

Pg.2

5- Attach payment module assy. to

bracket (3) with 2 screws from bag D.

(Partially attach L screw first and slide

on module to aid assy.).

USB

4- Attach module USB cable to computer

accessory port.

Attach bracket (3) using 2 screws from bag A.

X-series

INSTALLATION INSTRUCTIONS:

E200788 KIT-EMV-INGENICO ICMP CRADLE-X/IDS02

E201363 KIT-EMV-VERIFONE E355 CRADLE-X/IDS02

QIG600028 Rev. B

Pg.3

8- Remove two existing screws from

IDS back-cover (green circles).

Attach bracket (5) using 2 screws from

bag H.

Add one screw (5b) from bag A.

USB

6- Attach module USB cable to computer

accessory port.

Attach bracket (3) using 2 screws from bag A.

IDS-series

INSTALLATION INSTRUCTIONS:

E200788 KIT-EMV-INGENICO ICMP CRADLE-X/IDS02

E201363 KIT-EMV-VERIFONE E355 CRADLE-X/IDS02

7- Attach payment module assy. to

bracket (4) with 2 screws from bag D.

(Partially attach L screw first and slide

on module to aid assy.).

QIG600028 Rev. B

INSTALLATION INSTRUCTIONS:

E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M

E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M

Pg.1

1- Add payment

module to bracket (1)

2- Add USB cable, route as shown.

10”/15”/22” landscape = short cable.

15”/22” portrait = long cable.

3- Add payment module/bracket (1) to bracket (2)

with 2 screws from bag C.

4- Attach payment module assy. to

bracket (3) with 2 screws from bag D.

(Partially attach L screw first and slide

on module to aid assy.).

Screws,

(Use table or box edge

to aid assembly) L

Screws,

INGENICO ICMP

VERIFONE E355

QIG600028 Rev. B

INSTALLATION INSTRUCTIONS:

E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M

E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M

Pg.2

For display in landscape

orientation, see pg. 3 -

For display in portrait

orientation, see pg. 5 -

QIG600028 Rev. B

INSTALLATION INSTRUCTIONS:

E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M

E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M

Pg.3

6- Attach needed cables to computer / display

(eg. pwr., video, USB,).

Replace L/R cable doors.

7- Attach module USB cable to

computer accessory port.

8- Attach bracket (4) using 2

screws from bag A.

8b- Add bracket (5) to bracket (4)

using 2 screws from bag J.

For models 2002L, 1502L, ESY22i,

ESY15i.

* bracket (5) is not required for

thinner edge product – 1302.

Bracket (5) up = 2002L

Down = ESY22i, ESY15i, 1502L

QIG600028 Rev. B

INSTALLATION INSTRUCTIONS:

E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M

E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M

Pg.4

9- Attach bracket (3) assy. to VESA mount with 2 M4 flat head screws*.

For all systems larger than 15”, attach bracket (6) with 2 M4 flat head

screws* (red arrows).

*Use screws in bag E for 10”/15” systems, bag F for systems larger than 15”.

Attach bracket (3) assy. to bracket (4) or (5) using screw(s) from bag A

(red circles). One screw in mid. hole for ESY15/22i.

Use 4 - M4 threaded holes next to screws in VESA area to mount whole

system to stand / wall bracket (green arrows).

QIG600028 Rev. B

INSTALLATION INSTRUCTIONS:

E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M

E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M

Pg.5

11- Attach bracket (3) assy. to VESA mount with 4 M4 flat

head screws* (red arrows).

*Use screws in bag E for 10”/15” systems, bag F for systems

larger than 15”.

Attach module USB cable to computer accessory port.

Attach bracket (4) using 2 screws from bag A.

(red circles).

Use 4 - M4 threaded holes next to screws in VESA area to

mount whole system to stand / wall bracket (green arrows).

10- Attach needed cables to computer /

display (eg. pwr., video, USB,).

Replace L/R cable doors.

USB

QIG600028 Rev. B

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Elo TouchSystems Terminale di pagamento

Elo TouchSystems

Elo TouchSystems E990282 Manuale utente

Elo TouchSystems

Elo TouchSystems 1715L Manuale utente

Elo TouchSystems

Elo TouchSystems PayPoint for Android Manuale utente

Manuali Terminale di pagamento popolari di altre marche

PAX

PAX D180SRF Manuale utente

LinkPoint

LinkPoint AIO Manuale utente

Moneris

Moneris hispeed 6200 Manuale utente

Moneris

Moneris iWL220 Manuale utente

Ingenico

Ingenico iUC280 Manuale utente

Ingenico

Ingenico Tetra Move/5000 Manuale utente

Ingenico

Ingenico iWL250B Manuale utente

Optimum

Optimum M4230 Manuale utente

Triton

Triton RL5000 Manuale utente

Ingenico group

Ingenico group Lane/8000 Manuale utente

Gilbarco

Gilbarco FlexPay IV CRIND Manuale di installazione e funzionamento

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Manuale utente

PAX

PAX S920 Manuale utente

Ingenico

Ingenico iCT220, iCT250 Manuale utente

dejavoo

dejavoo Z Series Manuale utente

VeriFone

VeriFone VX 520 Series Manuale utente

Optomany

Optomany axept S900 Manuale utente

Skyzer

Skyzer iWL252 BLUETOOTH Manuale utente