Elo TouchSystems Wallaby... Manuale utente
© Copyright 2021 Elo Touch Solutions, Inc. 1
E421325 ELO-STA N D -SELF-SERVICE-15-22-FLOOR-TOP4
E797162 ELO-STA N D -SELF-SERVICE-15-22-FLOOR-BASE
ASSEMBLY INSTRUCTIONS, ELO SELF SERVICE STAND
Revision AQIG600185
© Copyright 2021 Elo Touch Solutions, Inc. 2
Contents for Kit: E421325 ELO-STAND-SELF-SERVICE-15-22-FLOOR-TOP4
Tie-wrap
Qty. 3
Hardware
Bag AQty.10 SCREW, M4X8, PAN-HEAD,
CROSS-RECESS
Bag BQty.4 SCREW, M4X8, FLAT-HEAD,
CROSS-RECESS
Bag CQty.3 SCREW, M3X8, PAN-HEAD,
CROSS-RECESS
Bag DQty.4 SCREW, 3mm X8L,
THREAD-FORMING, PAN-HEAD
Bag KQty.6 SCREW, M5X10, FLAT-HEAD,
CROSS-RECESS
Bag LQty.4 SCREW, M4X6, PAN-HEAD,
CROSS-RECESS
Bag MQty.4 SCREW, M4X18, PAN-HEAD,
CROSS-RECESS
Bag NQty.4 SCREW, M4X12, PAN-HEAD,
CROSS-RECESS
Bag SQty.3 SCREW, M4X5, PAN-HEAD,
CROSS-RECESS
Bag TQty.4 SCREW, M4X30, FLAT-HEAD,
CROSS-RECESS
Bag UQty.1 DOUBLE-SIDED FOAM TAPE
Floor-Head Assembly
Qty. 1
Display Bracket, Windows
Qty. 1
Display Bracket, Android
Qty. 1
USB Hub
Qty. 1
Straps
Qty. 3
Panel Hardware
Qty.2 SCREW, M6X14, PAN-HEAD, CROSS-RECESS
Qty.2 BACKER BOARD SPACER
Qty.2 THUMB SCREW
© Copyright 2021 Elo Touch Solutions, Inc. 3
Contents for Kit: E797162 ELO-STAND-SELF-SERVICE-15-22-FLOOR-BASE
Floor Base
Qty. 1
© Copyright 2021 Elo Touch Solutions, Inc. 4
X4
Assemble tower to base
plate using (4) screws
from bag “K”.
12
•Remove and save the (4) screws on the left and right of the stand
front cover.
•Pull off the silver cover and set aside.
•Add (2) remaining screws from bag “K” to bottom front of stand.
© Copyright 2021 Elo Touch Solutions, Inc. 5
Remove and save (2) screws on rear of Head, pull out printer tray.
3
© Copyright 2021 Elo Touch Solutions, Inc. 6
(Power strip shown available from McMaster-Carr, item
#7361K43)
•Add power strip brackets (supplied with power strip) using (2)
screws from bag “L”.
•Hook one side of power strip onto brackets then push to snap down.
Add power bricks into tower using provided straps.
54
© Copyright 2021 Elo Touch Solutions, Inc. 7
Remove and save (2) screws, open cover of Display Bracket;
pivot out and fix prop.
Gap
67
Add (2) screws from bag “A”; leave ~3mm (1/8”) gap
(for Display Bracket).
Choose Android or Windows Display Bracket
For 15” or 22” monitor, use Android Display Bracket
Android Display Bracket shown above
© Copyright 2021 Elo Touch Solutions, Inc. 8
•Assemble Display Bracket onto Head.
•Position “A” for 15”, 22” in landscape.
•Position “B” for 15” in portrait
•Position “C” for 22” in portrait
•Add (2) screws from bag “A” at bottom holes.
8
A
B
C
•Assemble USB Hub.
•Add (2) screws from bag “S”; leave ~3mm (1/8”) gap for USB
bracket to slide on; tighten screws.
9
For Android, skip to step 15
For monitors, skip to step 17
For Windows, skip to step 20
For Android Slate, skip to step 10
© Copyright 2021 Elo Touch Solutions, Inc. 9
10
Top Landscape
•Add (2) screws from bag “L” to top 75mm VESA
positions. Leave ~3mm (1/8”) gap for mounting to
display bracket.
•Connect Slate Hub to Slate and attach cable cover
before proceeding.
Add tie-wrap
Route Slate Hub through display bracket and head. Mount Slate, add (2)
screws from bag “L” to bottom 75mm VESA positions. Add tie-wrap as
shown. Tighten VESA screws to 12 in-lb (1.4 N-m).
Android Slate: Landscape
(For Portrait, skip to step 12)
11
Skip to step 14
Note: EMV Cradles are not compatible with Android Slate
in landscape orientation.
© Copyright 2021 Elo Touch Solutions, Inc. 10
12
Top Portrait
Add tie-wrap
•Add (2) screws from bag “L” to top 75mm VESA
positions. Leave ~3mm (1/8”) gap for mounting to
display bracket.
•Attach Slate Hub and cable cover before mounting
displays on stand.
•Route Slate Hub through display bracket and head.
•Mount Slate, add (2) screws from bag “L” to bottom 75mm VESA positions.
Add tie-wrap as shown.
•Tighten VESA screws to 12 in-lb (1.4 N-m).
Android Slate: Portrait
13
If using an EMV Cradle, follow those instructions
before proceeding.
Questo manuale è adatto per i seguenti modelli
3
Altri manuali Elo TouchSystems Rack e supporto
Elo TouchSystems
Elo TouchSystems Z10 POS Manuale utente
Elo TouchSystems
Elo TouchSystems E798125... Manuale utente
Elo TouchSystems
Elo TouchSystems Wallaby KIT-EMV-ING-IPP320 Manuale utente
Elo TouchSystems
Elo TouchSystems E421325... Manuale utente
Elo TouchSystems
Elo TouchSystems WALLABY PRO Manuale utente
Elo TouchSystems
Elo TouchSystems Z20 Manuale utente
Elo TouchSystems
Elo TouchSystems P400 EMV BRACKET KIT Manuale utente
Elo TouchSystems
Elo TouchSystems Wallaby KIT-EMV-VF-MX915-ING-ISC250-SQ-4 Manuale utente
