Elsema Eclipse MCS Guida utente

www.elsema.com

MCS : Motor Controller Single Gates

Setup and Technical Information

Includes latest Intelligent Technology

Motor Controller Single Gate

with Eclipse Operating System (EOS)

3rd Edition

®Eclipse®

MCS

All installations and testing must be done only after reading and

understanding all instructions carefully. All wiring should be done

only by trained technical personnel. Failing to follow instructions

and the safety warnings may result in serious injury and/or damage

to property.

Elsema Pty Ltd shall not be liable for any injury, damage, cost,

expense or any claim whatsoever to any person or property which

may result from improper use or installation of this product.

Risk in the goods purchased shall unless otherwise agreed in

written pass to the buyer upon delivery of the goods.

Any ﬁgures or estimates given for performance of goods are based

upon the company’s experience and is what the company obtains

on tests. The company will not accept liability for failure to comply

with the ﬁgures or estimates due to the nature of variable conditions

affecting for example Radio Remote Controls.

Please keep this setup instruction for future reference.

Installed by: _______________________________________

Service date: ______________________________________

Important warning and safety instructions

Gate & Door Controller with Eclipse®Operating System (EOS)

Index

Features ..............................................................4

Description..........................................................4

Part Number........................................................5

Menu Structure ............................................... 6-7

Connection Diagram ...........................................8

Supply and Motor Inputs ....................................9

Limit Switches...................................................10

Setup i-Learning Steps......................................11

Menu 1 – Auto Close........................................12

- Normal Auto Close...................................12

- Auto Close with Photoelectric Trigger ......12

- Auto Close after Power Restored ��13

- Auto Close Only when

Fully Opened............................................13

Menu 2 – Pedestrian Access Features ........ 13-14

Menu 3 – Input Functions.................................14

Menu 4 – Photoelectric Beam...........................15

Menu 5 – Relay Output Functions.....................16

- Lock/Brake Output....................................17

- Courtesy Light..........................................17

- Service Call Output ..................................18

- Strobe or Warning Light...........................18

Menu 6.1 – Lock/Brake Output Modes..............19

- Open Lock/Brake Activation .....................19

- Close Lock/Brake Activation.....................19

- Open Pre-Lock/Brake Activation...............19

- Close Pre-Lock/Brake Activation..............19

Menu 6.2 – Courtesy Light Output Mode..........20

Menu 6.3 – Strobe (Warning)

Light Output Mode.........................20

- Pre-Open Strobe Light Activation.............20

- Pre-Close Strobe Light Activation ............20

Menu 6.4 – Service Call Output Mode..............21

Menu 7 – Special Features................................22

- Remote Control Open Only.......................22

- Holiday Mode...........................................22

- Energy Saving Mode ................................22

- Automatic Stop / Open on Closing...........22

- Receiver Channel 2 Options .....................23

- Press and Hold on Open & Close Inputs..23

Menu 8 – Motor Obstruction

Detect Margins..................................23

- Margin Example .......................................23

Menu 9 – Motor Speed, Slow Speed

Area and Reverse Time......................24

- Open and Close Speed.............................24

- Slow Speed ..............................................24

- Slow Speed Area ......................................24

- Obstruction Stop Reverse Delay Time ......24

Menu 10 – Anti-Jam, Electronic Braking and

Open/Close Obstruction Operation .25

Menu 11 – i-Learning.......................................26

Menu 12 – Password........................................26

Menu 13 – Operational Records........................26

- Event History��26

- Displays Gates/Doors Operations............. 26

Menu 14 – Tools...............................................27

- Battery Type..............................................27

- Set the Supply Voltage .............................27

- Resets Controller & Test Inputs................27

- Travel Timer for Slip Clutch Motors..........27

- Slow Speed Ramp Down Time .................27

Accessories.......................................................28

- Battery Charger and Solar Applications....28

- Backup Batteries.......................................28

- Keyring Remotes & Photoelectric Beams .29

- Strobe Lights............................................29

PentaFOB®Programming Instructions..............30

www.elsema.com

Description

Features

›Lithium-ion and lead acid battery charger

›Suitable for single swing and sliding gates

›Single motor operation

›Eclipse Operating System (EOS)

›Motor soft start and soft stop

›Slow speed and force adjustment

›Large 4-line LCD to indicate controllers status

and setup instructions

›1-Touch control for easy setup

›Various inputs, push button, open only, close

only, stop, pedestrian and photoelectric beam

›Supports limit switch inputs or mechanical stops

›Adjustable auto close and pedestrian access

›Adjustable lock and courtesy light outputs

›Variable photoelectric safety beam functions

›12 Volt DC Output to power accessories

›Service counters, password protection, holiday

mode and many more features

The Motor Controller Single (MCS) is not just the next generation but the industry game changer. We

wanted to create a controller that is simple to use and does just about any feature required in the gate

and door industry. The MCS is not just the next generation but the “Next Transformation” in the gate and

door industry creating an Eclipse over previously developed motor controllers.

This new intelligent motor controller is the best match for your automatic gate or door motors.

The MCS’s Eclipse® Operating System (EOS) is a user friendly menu driven system that uses the 1-touch

button to control, setup and run automatic gates, doors and barriers. It uses a large 4-line LCD screen

showing live reading of the motor performance and status of all inputs and outputs.

The intelligent controller was built from the ground up, based on customer feedback and using todays

technology. With its rich functions, consumer friendly price and with the focus during development

being ease of use and setup makes this controller the ultimate board to control your motors.

Elsema’s easy options to add remote controls or any type of photoelectric beams makes for a very user

friendly approach, while avoiding the lockdown approach to accessories.

The control cards are available with an IP66 rated plastic enclosure for outdoor installations or the card

only.

Gate & Door Controller with Eclipse®Operating System (EOS)

MCS

MCS24E or MCS12E

Part Number:

Part No. Contents Part No. Contents

MCS Single gate and door controller

for 24 / 12 Volt motor, card only

MCS24E Single controller for 24 Volt motors includes IP66

rated plastic enclosure and transformer MCS12E Single controller for 12 Volt motors includes IP66

rated plastic enclosure and transformer

MCS24E2 Same as MCS24E plus 24 Volt 2.6Ah backup battery MCS12E2 Same as MCS12E plus 12 Volt 2.6Ah backup battery

MCS24E7 Same as MCS24E plus 24 Volt 7.0Ah backup battery MCS12E7 Same as MCS12E plus 12 Volt 7.0Ah backup battery

Solar Gates

Solar24 Solar kit for double or single gates, includes intelligent

solar charger & 24 Volt 12.0Ah backup battery Solar12 Solar kit for double or single gates, includes intelligent

solar charger & 12 Volt 12.0Ah backup battery

SP20* 20 Watt solar panel SP40* 40 Watt solar panel

MCS12E7

www.elsema.com

Menu Structure Press Master Control for 2 seconds to enter the menu structure

1.0

Auto Close

1.1

Auto Close Time

1.2

AC Time with PE Trig

7.1

RC Open only

7.2

Holiday Mode

4.1

Stop & Open on Close Cycle

13.1

Events History

13.2

Display Operations / Currents

2.1

PA Travel Time

2.2

PA AC Time

5.1

Relay Output 1

Lock / Brake

6.1.1: Open Lock Activation 6.2.1: Courtesy Light

6.3.1: Pre-Open Warning Light

Lock / Brake

Courtesy Light

6.1.2: Close Lock Activation

Courtesy Light

Service Call

6.1.3: Pre-Open Lock

Service Call

Strobe (Warning) Light

6.1.4: Pre-Close Lock

6.1.5: EXIT

Strobe (Warning) Light

5.2

Relay Output 2

9.1

Open Speed (%)

9.2

Close Speed (%)

12.1

Enter Password

12.2

Delete Password

14.1

Battery Type

14.2

Supply Voltage

3.1

PE Polarity

3.2

Limit Sw Polarity

8.1

Open Obstruct

8.2

Close Obstruct

10.1

Open Anti-Jam

10.2

Close Anti-Jam

6.1

Lock Output

6.2

Light Output

2.0

Pedestrian Access

3.0

Input Functions

4.0

PE Safety Beam Function

5.0

Output Functions

6.0

Output Modes

7.0

Special Features

8.0

Motor Obstruct Detect Margin

10.0

Anti-Jam / Electronic Braking

12.0

Password

9.0

Motor Speed, Slow Speed Area & Reverse Time

11.0

Travel Learn

13.0

Operational Records

14.0

Tools

EXIT PROGRAMMING

MAIN

SCREEN

PE Beam Stops Motor

on Close Cycle

6.2.2: EXIT

Gate & Door Controller with Eclipse®Operating System (EOS)

1.3

AC After Open Obstruct

7.3

Energy Saving

13.3

Reset Max Current Records

13.4

EXIT

2.3

PA AC Time with PE Trig

6.4.1: Service Counters

6.3.1: Pre-Open Warning Light

6.4.2: EXIT

6.3.2: Pre-Close Warning Light

6.3.3: EXIT

5.3

EXIT

9.3

Slow Speed (%)

9.4

Open Slow Speed Area

8.4

Obstruct Det Response

9.5

Close Slow Speed Area

8.5

EXIT

7.4

Automatic Stop/Open on Closing

7.5

Receiver Channel 2 Options

6.5

EXIT

4.2

EXIT

1.5

AC on Seq. Obstruct

6.4

Service Call

2.4

PA AC on Seq. Obstruct

1.4

AC After Power Restored

1.6

AC Only When Fully Open

9.6

Stop Rev Delay Time

9.7

EXIT

12.3

EXIT

14.3

Reset Factory Default

14.4

Test Inputs

3.3

Stop Input Polarity

8.3

Slow Speed Obstruct

10.3

Electronic Braking

6.3

Strobe (Warning) Light

14.5

Travel Timer for Slip Motors

7.6

Press and Hold, Open Input

7.7

Press and Hold, Close Input

7.8

Window / Louvre Mode

7.9

Reserved

PE Beam Stops Motor

on Open & Close Cycle

PE Beam Stops Motor and

Closes on Open Cycle

2.6

EXIT

2.5

PA Hold Gate

14.8

Slow Speed Ramp Down

14.6

Solar Gate Mode

14.7

Fuse Type : 10 or 15 Amps

10.4

Open Obstruction Operation

10.5

Close Obstruction Operation

10.6

EXIT

1.7

EXIT

3.4

EXIT

14.9

Magnetic Limit Switch

7.10

Exit

14.10

Exit

www.elsema.com

MCS Connection Diagram

Normally Closed

User can change

Fuse

Relay

Open Close Stop

Master

Control

AC Supply

DC Output +

DC Output -

AC Supply

Motor

AC Supply

Battery +

Battery -

Open Limit

Common

Close Limit

Push Button

Open

Stop

Common

PED Access

Photo Beam

+ 12 VDC

- 12 VDC

Output 1 C

Output 1 NO

AC Supply : 24/12 Volts AC

Model : MCSv1

ELSEMA

IN AUSTRALIA

Normally Closed

User can change

ELSEMA

Normally Open

User can change

Eclipse

operating

system

Receiver

Program 2

Program 1

Antenna 1

Shield

Antenna 2

90mm

140mm

Output 2

Used with

Relay 1-12

Output Rated

at 250mA

12 or 24 Volts

AC Supply

Built-in

Receiver

Gate & Door Controller with Eclipse®Operating System (EOS)

Electrical Wiring - Supply, Motors and Inputs

Always switch off power before doing any wiring.

Make sure that all the wiring is completed and that the motor is connected to the control card.

Recommended wire strip length should be 12mm for all connections to the plug in

terminal blocks.

The diagram below shows the supply, motors, and inputs available and the factory default setting for each

input.

Normally Closed

User can change

Fuse

Relay

Open Close Stop

Master

Control

Open Limit

Common

Motor 1

Close Limit

Motor 1

Push Button

Open

Stop

Common

PED Access

Photo Beam

AC Supply : 24/12 Volts AC

Model : MCS

IN AUSTRALIA

Normally Closed

User can change

ELSEMA

Normally Open

User can change

AC Supply

DC Output +

DC Output -

AC Supply

Motor 1

AC Supply

Battery +

Battery -

12 or 24 Volts

AC Supply

www.elsema.com

Limit Switches

Controller with

limits connected

By default the limit switch inputs on the control card are normally closed (NC).

This can be changed to normally open (NO) during the setup steps.

Fuse

Master

Control

Open Limit

Common

Close Limit

AC Supply : 24/12 Volts AC

Model : MCS

ELSEMA

IN AUSTRALIA

AC Supply

Motor

Normally Closed

User can change

Motor 1

Fuse

Master

Control

AC Supply : 24/12 Volts AC

Model : MCS

ELSEMA

IN AUSTRALIA

AC Supply

Motor

Limit

Open

Limit

Diode* Diode*

*6Amps, 50V or better diode

Controller with limits

in series with motor

If you are using limit switches make sure they are connected properly. The control card can operate

with either the limit switches connected directly to the cards terminal blocks or in series with the

motor. See the diagrams below:

Gate & Door Controller with Eclipse®Operating System (EOS)

Altri manuali per Eclipse MCS

Indice

Altri manuali Elsema Controllori

Elsema

Elsema Eclipse MC Manuale utente

Elsema

Elsema 240S1 Series Manuale utente

Elsema

Elsema Eclipse MC240 Manuale

Elsema

Elsema MCi Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente