Elsner elektronik KNX R4 16 A Guida

Installation and Adjustment

KNX R4 16 A and

KNX R8 16 A

Switching Actuators

Item numbers 70571 (KNX R4 16 A) and 70570 (KNX R8 16 A)

1 Contents

Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany

Actuators KNX R4 16 A and KNX R8 16 A • from application 1.0

Status: 28.05.2020 • Subject to technical changes. Errors excepted.

1. Description ........................................................................................... 3

1.0.1. Scope of delivery .......................................................................................... 3

1.1. Technical specification ............................................................................................. 3

2. Installation and start-up ....................................................................... 4

2.1. Installation notes ...................................................................................................... 4

2.2. Safety notice for automatic functions .................................................................... 5

2.3. Connection ................................................................................................................ 6

2.3.1. Insulation properties of the clamp groups ................................................. 8

2.3.2. Connection examples ................................................................................. 10

2.4. Instructions for assembly and operational start-up. ........................................... 11

3. Addressing of the device at the bus .................................................. 11

4. Disposal ............................................................................................. 12

5. Transfer protocol ............................................................................... 13

5.1. List of all communication objects ......................................................................... 13

6. Setting parameters ............................................................................ 16

6.1. Behaviour on power failure/ restoration of power .............................................. 17

6.2. General settings ..................................................................................................... 17

6.3. Switch function ....................................................................................................... 17

6.3.1. Relationship between logic operation – timer switch – Block ................. 18

6.3.2. Linking ......................................................................................................... 19

6.3.3. Switch on and off delay .............................................................................. 19

6.3.4. Staircase time switch .................................................................................. 20

6.3.5. Block function .............................................................................................. 21

6.3.6. Scenes ......................................................................................................... 21

2 Clarification of signs

This manual is amended periodically and will be brought into line with new software

releases. The change status (software version and date) can be found in the contents footer.

If you have a device with a later software version, please check

www.elsner-elektronik.de in the menu area "Service" to find out whether a more up-to-

date version of the manual is available.

Clarification of signs used in this manual

Installation, inspection, commissioning and troubleshooting of the device

must only be carried out by a competent electrician.

Safety advice.

Safety advice for working on electrical connections, components,

etc.

DANGER! ... indicates an immediately hazardous situation which will lead to

death or severe injuries if it is not avoided.

WARNING! ... indicates a potentially hazardous situation which may lead to

death or severe injuries if it is not avoided.

CAUTION! ... indicates a potentially hazardous situation which may lead to

trivial or minor injuries if it is not avoided.

ATTENTION! ... indicates a situation which may lead to damage to property if it is

not avoided.

ETS In the ETS tables, the parameter default settings are marked by

underlining.

3 Description

Actuators KNX R4 16 A and KNX R8 16 A • Version: 28.05.2020 • Technical changes and errors excepted.

1. Description

The potential-free outputs of the Actuators KNX R4 16 A and KNX R8 16 A switch

consumer loads up to 16 Ampere.

Time functions such as an on/off delay or a staircase lighting function can be config-

ured in the devices applications. Linking with AND or OR is also possible.

Functions:

•Free of potential relay output for consumer loads with up to 16 A.

KNX R4 16 A: 4 individually controllable outputs.

KNX R8 16 A: 8 individually controllable outputs.

•Timer functions: on and/or off delay, staircase lighting timer switch with

adjustable pre-warning (light blinks prior to switch-off)

Configuration is made using the KNX software ETS 5. The product file can be down-

loaded from the ETS online catalogue and the Elsner Elektronik website on www.els-

ner-elektronik.de in the “Service” menu.

1.0.1. Scope of delivery

•Actuator

1.1. Technical specification

Housing Plastic

Colour White

Assembly Series installation on mounting rail

Protection category IP 20

Ambient temperature Operation -20…+45°C, storage -55…+90°C

Ambient humidity max. 95% RH, avoid condensation

Operating voltage KNX bus voltage

Current at the bus operation without relay activity: 15 mA.

For permanent relay switching operations up to 30 mA

Output load capacity • 16 A with alternating voltage, maximum 250 V AC

• 5 A with direct current 30 V DC

• UL approval up to 10 A

• Cable cross section 1.5 mm² to 2.5 mm²

Maximum load Each terminal contact may be loaded with a maximum

of 16 A.

Data output KNX +/- bus connector terminal

BCU type Integrated microcontroller

PEI type 0

Group addresses max. 254

Assignments max. 254

4 Installation and start-up

Actuators KNX R4 16 A and KNX R8 16 A • Version: 28.05.2020 • Technical changes and errors excepted.

KNX R4 16 A (70571):

KNX R8 16 A (70570):

The product is compliant with the provisions of EU guidelines.

2. Installation and start-up

2.1. Installation notes

Installation, testing, operational start-up and troubleshooting should

only be performed by an electrician.

DANGER!

Risk to life from live voltage (mains voltage)!

There are unprotected live components within the device.

• VDE regulations and national regulations are to be followed.

• Ensure that all lines to be assembled are free of voltage and take

precautions against accidental switching on.

• Do not use the device if it is damaged.

• Take the device or system out of service and secure it against

unintentional use, if it can be assumed, that risk-free operation is no

longer guaranteed.

The device is only to be used for the intended purpose described in this manual. Any

improper modification or failure to follow the operating instructions voids any and all

warranty and guarantee claims.

After unpacking the device, check it immediately for possible mechanical damage. If it

has been damaged in transport, inform the supplier immediately.

The device may only be used as a fixed-site installation; that means only when assem-

bled and after conclusion of all installation and operational start-up tasks and only in

the surroundings designated for it.

Dimensions approx. 53 x 88 x 60 (W x H x D, mm), 3 modules

Weight approx. 150 g

Outputs 4 × output, free of potential,

each power supply U | OUT

Communication objects 37

Dimensions approx. 107 x 88 x 60 (W x H x D, mm), 6 modules

Weight approx. 270 g

Outputs 8 × output, free of potential,

each power supply U | OUT

Communication objects 73

5 Installation and start-up

Actuators KNX R4 16 A and KNX R8 16 A • Version: 28.05.2020 • Technical changes and errors excepted.

Elsner Elektronik is not liable for any changes in norms and standards which may occur

after publication of these operating instructions.

2.2. Safety notice for automatic functions

WARNING!

Risk of injury from automatically moving components!

Parts of the system can be started by the automatic controls

and be a danger to persons.

• No persons may remain in the travelling range of parts

driven by an electric motor.

• Adhere to the relevant building regulations.

• Ensure that the return path/access to the building is not blocked

if spending time outside the building (danger of being locked out).

• Correctly decommission the system for maintenance and

cleaning work.

If there is a power outage, the system does not work. Therefore, shadings should be

moved to a save position if there are anticipated weather conditions, for example, if

this has not already been done by the automatic function (product protection).

If the power supply is removed, the connected drive switches off. When the power is

restored, the consumer remains switched off until a new movement command is re-

ceived by the actuator.

6 Installation and start-up

Actuators KNX R4 16 A and KNX R8 16 A • Version: 28.05.2020 • Technical changes and errors excepted.

2.3. Connection

Fig. 1 KNX R4 16 A

1 Labeling field

2 Programming LED (BUS) and programming

button (PRG)

3 Slot Bus connector (KNX +/-)

4 LED output A1 (A2, B1, B2 accordingly)

5 Button on/off output A1 (A2, B1, B2 accor-

dingly)

6 Power LED

7 Output A1:

UA1 (voltage) / A1 (out)

8 Output A2:

UA2 (voltage) / A2 (out)

9 Output B1:

UB1 (voltage) / B1 (out)

10 Output B2:

UB2 (voltage) / B2 (out)

987

7 Installation and start-up

Actuators KNX R4 16 A and KNX R8 16 A • Version: 28.05.2020 • Technical changes and errors excepted.

The Actuators KNX R4 16 A and KNX R8 16 A are installed on a mounting rail

(series installation). The connection is made using a KNX connector on the KNX data

bus. In addition, a power supply for the connected drive or consumer is necessary (out-

put free of potential).

Fig. 2 KNX R8 16 A

1 Labeling field

2 Programming LED (BUS) and programming button (PRG)

3 Slot Bus connector (KNX +/-)

4 LED output A1 (A2, B1, B2, C1, C2, D1, D2 accordingly)

5 Button on/off output A1 (A2, B1, B2, C1, C2, D1, D2 accordingly)

6 Power LED

7OutputA1:U

A1 (voltage) / A1 (out)

8OutputA2:U

A2 (voltage) / A2 (out)

9OutputB1:U

B1 (voltage) / B2 (out)

11 Output C1: UC1 (voltage) / C1 (out)

12 Output C2: UC2 (voltage) / C2 (out)

13 Output D1: UD1 (voltage) / D1 (out)

14 Output D2: UD2 (voltage) / D2 (out)

7 8 9 1110 12 13 14

8 Installation and start-up

Actuators KNX R4 16 A and KNX R8 16 A • Version: 28.05.2020 • Technical changes and errors excepted.

Follow the guidelines and standards for SELV electric circuits

while installing and cable laying of the KNX connection and

inputs!

The physical address is assigned by the KNX software. There is a button with a control

LED for this on the actuator.

2.3.1. Insulation properties of the clamp groups

The Actuators KNX R4 16 A and KNX R8 16 A are assigned to Overvoltage cate-

gory III and Pollution degree 2 or 3 according to EN60664-1. According to this classifi-

cation,

between 250 V power cables and FELV 4 kV surge voltage resistance and

between 250 V power cables and SELV 6 kV surge voltage resistance

must be provided. This provision must be observed during the installation.

With single insulation,

at pollution degree 2 a voltage of 400 V AC and

at pollution degree 3 a voltage of 250 V AC

is allowed between two channels.

KNX R4 16 A:

Neighbouring clamp groups may not be used with mixed

voltages, as there is only single insulation between them.

Non-labelled clamps (X) may not be used, to avoid influencing the insulation proper-

ties!

Fig. 3 KNX R4 16 A Insulation properties of the clamp groups

Insulation 4 kV (single insulation)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali elsner elektronik Controllori

elsner elektronik

elsner elektronik KNX S-B4T-UP 230 V Manuale di istruzioni

elsner elektronik

elsner elektronik KNX eTR MultiTouch Manuale utente

elsner elektronik

elsner elektronik KNX S-B2-UP 230 V Manuale di istruzioni

elsner elektronik

elsner elektronik KNX R1-B4 compact 16 A Guida

elsner elektronik

elsner elektronik KNX RF S1R-B2 compact Guida

elsner elektronik

elsner elektronik 70711 Manuale utente

elsner elektronik

elsner elektronik KNX S1R-B4 compact Guida

elsner elektronik

elsner elektronik KNX RF-MSG-ST Manuale utente

elsner elektronik

elsner elektronik KNX S1R-B4-UP DES Guida

elsner elektronik

elsner elektronik KNX S4-B10 230 V Manuale utente

elsner elektronik

elsner elektronik KNX RF-MSG-DST Guida

elsner elektronik

elsner elektronik KNX S4-B12 DES Manuale utente

elsner elektronik

elsner elektronik KNX S2 Manuale utente

elsner elektronik

elsner elektronik Cala Touch KNX Manuale utente

elsner elektronik

elsner elektronik KNX K4 Manuale utente

elsner elektronik

elsner elektronik KNX DALI L4 bc 16 A Guida

elsner elektronik

elsner elektronik KNX S1R-BA4-UP Guida

elsner elektronik

elsner elektronik Nunio KNX M-T Guida

elsner elektronik

elsner elektronik KNX eTR 205 Light Guida

elsner elektronik

elsner elektronik RF-MSG2-DST Manuale utente

elsner elektronik

elsner elektronik KNX RF-MSG2-DST Manuale utente

elsner elektronik

elsner elektronik KNX Touch One Style Manuale utente

elsner elektronik

elsner elektronik KNX K8 Guida

elsner elektronik

elsner elektronik KNX S1R-B4-UP DES Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

elsner elektronik KNX R4 16 A Guida

Manuali Controllori popolari di altre marche