Elsner elektronik RF-Router-N Manuale utente

RF-Router-N

Rad io Router

Technical specifications and installation instructions

Part number 60529

Elsner Elektronik GmbH Control and Automation Technology

Sohlengrund 16

D - 75395 Ostelsheim Phone+49 (0) 70 33 / 30 945-0 [email protected]

Germany Fax +49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de

Technical Service: +49 (0) 70 33 / 30 945-250

2 Description

RF-Router-N • Version: 10.05.2016 • Technical changes and errors excepted.

1. Description

The RF-Router-N routes the radio signals from 16 radio clients to the WS1 and

WS1000 Color/Style controllers. As a result, the range of the radio signal is increased.

Due to its construction as an adapter, the RF-Router-N can be used by everyone with-

out having to call an electrician.

Functions:

• Bidirectional routing of the radio signal

• For up to 16 radio clients (devices with radio protocol Elsner RF)

• For controllers WS1 Color, WS1 Style, (KNX) WS1000 Color, (KNX) WS1000

Style (Software 1.708 and higher)

1.0.1. Safety advice

WARNING!

Risk of injury caused by components moved automatically!

If the wireless connection between the control unit and the wireless 

actuator is interrupted, connected devices can no longer be operated. 

• For that reason do not connect drives to the wireless actuator which 

could be hazardous to human life!

1.1. Technical specifications

The product is compliant with the provisions of EU guidelines.

1.2. Deliverables

• Router in housing with integrated socket CEE 7/4.

Housing Plastic, black

Protection category IP 20

Dimensions approx. 54 x 86 x 80 (W x H x D, mm)

Weight approx. 175 g

Ambient temperature Operation -20…+50 °C, storage -55…+70°C

Ambient humidity max. 95% RH, avoid condensation

Operating voltage 230 V AC (earth-protected plug CEE 7/4)

Output (looped through) CEE 7/4 socket (for earth-protected plug),

loadable with max. 10 A / 230 V AC

Wireless frequency 868.2 MHz

3 Installation and commissioning

RF-Router-N • Version: 10.05.2016 • Technical changes and errors excepted.

2. Installation and commissioning

2.1. Installation notes

DANGER!

Risk to life from live voltage (mains voltage)! 

There are unprotected live components within the device.

• VDE regulations and national regulations are to be followed.

• Ensure that all lines to be assembled are free of voltage and take

precautions against accidental switching on.

• Do not use the device if it is damaged. 

• Take the device or system out of service and secure it against

unintentional use, if it can be assumed, that risk-free operation is no

longer guaranteed.

The device is only to be used for its intended purpose. Any improper modification or

failure to follow the operating instructions voids any and all warranty and guarantee

claims.

After unpacking the device, check it immediately for possible mechanical damage. If it

has been damaged in transport, inform the supplier immediately.

The device may only be used as a fixed-site installation; that means only when assem-

bled and after conclusion of all installation and operational start-up tasks and only in

the surroundings designated for it.

Elsner Elektronik is not liable for any changes in norms and standards which may occur

after publication of these operating instructions.

2.2. Notes on wireless equipment

When planning facilities with devices that communicate via radio, adequate radio re-

ception must be guaranteed. The range of wireless control will be limited by legal reg-

ulation and structural circumstances. Avoid sources of interference and obstacles be-

tween receiver and transmitter, that could disturb the wireless communication. Those

would be for example:

• Walls and ceilings (especially concrete and solar protection glazing).

• Metal surfaces next to the wireless participants (e. g. aluminium construction

of a conservatory).

• Other wireless devices and powerful local transmitters (e.g. wireless

headphones), which transmit on the same frequency (868,2 MHz). Please

maintain a minimum distance of 30 cm between wireless transmitters for that

reason.

4 Installation and commissioning

RF-Router-N • Version: 10.05.2016 • Technical changes and errors excepted.

2.3. Connection

The radio router is plugged into a mains socket (CEE 7/4). The mains voltage must be

230 V AC / 50 Hz.

Install and use only in dry interior rooms. Avoid condensation.

Do not expose to continuous sun radiation to avoid overheating.

The housing is not UV-resistant.

The Radio Router N is taught-in for the controller like a radio actuator. In the menu

System > Installation > Radio connection > RF Router > Status

other radio clients that have already been taught-in are assigned to the router. Their

radio signal is then routed through the RF-Router-N if the transmission path is too

long for a direct connection.

2.3.1. Radio communication schema

Radio actuators (ventilators, relays, motor control units ...) can only be operated with

the remote control Remo 8 via the controller. They can not be additionally switched di-

rectly with the remote control.

2.4. Notes on mounting and commissioning

Device must not be exposed to water (rain). This could result in the electronic being

damaged. A relative air humidity of 95% must not be exceeded. Avoid bedewing.

Controller

Remote control

Remo 8

Motor control unit

RF-MSG (motor control unit)

RF router Ventilation device

WL610

RF relay

Remote control

Remo 8

Radio communica-

tion directly with

the Controller:

Radio communica-

tion with the control-

ler via RF Router:

This device must also

be taught-in at the

controller.

5 Installation and commissioning

RF-Router-N • Version: 10.05.2016 • Technical changes and errors excepted.

2.5. Establishing a wireless connection

If in the system there are several radio clients operating on one mains line, it is better

to teach every radio client separately before installation.

1. Put the control unit into teaching mode (observe the corresponding manual/data

sheet).

2. Plug in the RF router. The device learns a connection to the control unit on its own

3 seconds after the mains voltage is applied. Only one radio client can be recog-

nised at a time.

Observe the response from the control system ("device taught").

The procedure for assigning radio clients to the router is described in the operating

manual for the controller.

Indice

Altri manuali elsner elektronik Router di rete

elsner elektronik

elsner elektronik KNX CP IP Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza

elsner elektronik RF-Router-N Manuale utente

Manuali Router di rete popolari di altre marche