Elsner RF-B2-UP Guida

Installation and Adjustment

RF-B2-UP

Radio-button interface

Item number 60540

1 Contents

Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany

Button interface RF-B2-UP

Version: 03.11.2021 • Subject to technical changes. Errors excepted.

1. Safety and operating instructions ....................................................... 3

2. Description ........................................................................................... 3

3. Commissioning .................................................................................... 4

3.1. Creating and deleting wireless connections .......................................................... 4

3.1.1. Controls WS1 and WS1000 Color/Style/Connect ....................................... 4

3.1.2. XS MSG2-AP motor control device ............................................................. 4

3.1.3. Controls Solexa / Arexa / Lixa, ventilator WL305 / WL610 / WFL, RF relay, RF-

VM 5

3.1.4. Ventilation units WL400/WL800, WL-Z ........................................................ 6

3.1.5. Motor control devices RF-MSG, RF relay UP .............................................. 6

3.1.6. Control Solexa II ............................................................................................ 7

4. Operation ............................................................................................. 7

4.1. Pushbutton functions ............................................................................................... 7

4.1.1. Order of the ventilation levels ..................................................................... 8

2 Clarification of signs

This manual is amended periodically and will be brought into line with new software

releases. The change status (software version and date) can be found in the contents footer.

If you have a device with a later software version, please check

www.elsner-elektronik.de in the menu area "Service" to find out whether a more up-to-

date version of the manual is available.

Clarification of signs used in this manual

Safety advice.

Safety advice for working on electrical connections, components,

etc.

DANGER! ... indicates an immediately hazardous situation which will lead to

death or severe injuries if it is not avoided.

WARNING! ... indicates a potentially hazardous situation which may lead to

death or severe injuries if it is not avoided.

CAUTION! ... indicates a potentially hazardous situation which may lead to

trivial or minor injuries if it is not avoided.

ATTENTION! ... indicates a situation which may lead to damage to property if it is

not avoided.

3 Safety and operating instructions

Button interface RF-B2-UP • Version: 03.11.2021 • Technical changes and errors expected.

1. Safety and operating instructions

Installation, testing, operational start-up and troubleshooting should

only be performed by an authorised electrician.

CAUTION!

Live voltage!

There are unprotected live components inside the device.

• Inspect the device for damage before installation. Only put undamaged

devices into operation.

• Comply with the locally applicable directives, regulations and provisions for

electrical installation.

• Immediately take the device or system out of service and secure it against

unintentional switch-on if risk-free operation is no longer guaranteed.

Use the device exclusively for building automation and observe the operating

instructions. Improper use, modifications to the device or failure to observe the

operating instructions will invalidate any warranty or guarantee claims.

Operate the device only as a fixed-site installation, i.e. only in assembled condition and

after conclusion of all installation and operational start-up tasks, and only in the

surroundings designated for it.

Elsner Elektronik is not liable for any changes in norms and standards which may occur

after publication of these operating instructions.

For information on installation, maintenance, disposal, scope of

delivery and technical data, please refer to the installation

instructions.

2. Description

The Button interface RF-B2-UP features four connections for two double buttons

(up/down or on/off) and transfers the switching signals to the taught device by radio.

Suitable for the following devices:

• Control WS1 Color from version 1.597

• Controls WS1 Style and (KNX) WS1000 Style

• Control WS1000 Connect

• Control Solexa from version 3.6

• Control Solexa II from software version 1.0

• Control Arexa from version 3.7

• Ventilation units WL400 and WL800 from version 1.0

• Air supply unit WL-Z from version 1.0, WFL from version 2.0

• RF relay from version 2.0, RF-MSG, RF-VM

• F-Con radio units RF-HE-ST, RF-MSG-ST, RF-Relais-ST, RF-MSG(2)-DST,

RF-L PWM-ST, RF-L LED-ST, RF-L UN-ST, RF-L-DST 1-10 V, RF-L-DST DALI

4 Commissioning

Button interface RF-B2-UP • Version: 03.11.2021 • Technical changes and errors expected

3. Commissioning

3.1. Creating and deleting wireless connections

Each of the pushbuttons connected to input 1 and 2 controls one or several drives/devices.

3.1.1. Controls WS1 and WS1000 Color/Style/Connect

Learn:

1. Prepare control for learning:

•MenuSystem > Installation > Radio connection> Learning.

• Please also follow the instructions in the manual.

2. Teaching the pushbutton interface:

• Briefly press the PRG key 1 or 2 on the pushbutton interface once.

• The selected PRG key will not affect the configuration of the WS1000 Color/

WS1 Color.

3. Acknowledgement from the control system:

• Control signals "device taught".

Once the Button interface RF-B2-UP has been taught to know the control, you can

assign a name to the pushbutton interface in the menu System > Installation > Radio

connection > Status and assign drives and devices to pushbutton 1 and 2 ("channel" 1

and 2).

Deletion:

1. Deleting a radio connection:

• On the control, call up the menu item System > Installation > Radio

connection> Delete.

• Please also follow the instructions in the manual.

3.1.2. XS MSG2-AP motor control device

Teaching and deletion may only be carried out by a qualified

electrician (according to VDE 0100)!

Learn:

1. Prepare motor control device for learning:

(also see chapter "Radio connection motor control device - Remo 8" in the manual)

• Press the learning/deletion key of the motor control device briefly 3 times

until the left LED comes on.

• For the right channel, press the learning/deletion key of the motor control

device briefly 4 times until the right LED comes on.

2. Teaching the pushbutton interface:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once briefly.

5 Commissioning

Button interface RF-B2-UP • Version: 03.11.2021 • Technical changes and errors expected.

The pushbutton is now configured to the channel of the motor control unit.

Deletion:

1. Prepare control for deletion:

(see also the chapter "Radio connection motor control device - Remo 8" in the man-

ual)

• Press the learning/deletion key of the motor control device briefly 3 times

until the left LED comes on.

• For the right channel, press the learning/deletion key of the motor control

device briefly 4 times until the right LED comes on.

2. Deleting the pushbutton interface:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once for more than 3 seconds until the programming

LED comes on.

• Press the PRG once again for longer than 3 seconds until the programming

LED flashes (= ready for deletion)

• Press the PRG key once again briefly.

The wireless connection is deleted.

3.1.3. Controls Solexa / Arexa / Lixa, ventilator WL305 /

WL610 / WFL, RF relay, RF-VM

Teaching and deletion may only be carried out by a qualified

electrician (according to VDE 0100)!

Learn:

1. Prepare pushbutton interface for learning:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once for more than 3 seconds until the programming

LED comes on (= ready for learning)

2. Teach controls, ventilators or relays:

• Press the programming button inside the device briefly a single time using

an insulated screwdriver.

The pushbutton is now taught for the device.

Deletion:

1. Prepare pushbutton interface for deletion:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once for more than 3 seconds until the programming

LED comes on.

• Press the PRG once again for longer than 3 seconds until the programming

LED flashes (= ready for deletion)

2. Delete controls, ventilators or relays:

• Press the programming button inside the device briefly a single time using

an insulated screwdriver.

6 Commissioning

Button interface RF-B2-UP • Version: 03.11.2021 • Technical changes and errors expected

The wireless connection is deleted.

3.1.4. Ventilation units WL400/WL800, WL-Z

Teaching and deletion may only be carried out by a qualified

electrician (according to VDE 0100).

Learn:

5. Prepare pushbutton interface for learning:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once for more than 3 seconds until the programming

LED comes on (= ready for learning)

6. Teach ventilation unit:

• Switch on the 230 V power supply to the fan and/or shut off the power

supply briefly if the unit is already supplied with power. The fan

automatically teaches itself after the mains voltage is applied.

Deletion:

1. Prepare pushbutton interface for deletion:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once for more than 3 seconds until the programming

LED comes on.

• Press the PRG once again for longer than 3 seconds until the programming

LED flashes (= ready for deletion)

2. Deleting a ventilation unit:

• Switch on the 230 V power supply to the fan and/or shut off the power

supply briefly if the unit is already supplied with power. The radio

connection will be cleared automatically after the mains voltage is applied.

3.1.5. Motor control devices RF-MSG, RF relay UP

Teaching and deletion may only be carried out by a qualified

electrician (according to VDE 0100).

Learn:

1. Prepare pushbutton interface for learning:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once for more than 3 seconds until the programming

LED comes on (= ready for learning)

2. Teach relay or motor control device:

• Switch on the voltage supply of the RF-MSG or RF relay UP. The motor

control unit automatically teaches itself 3 seconds after the mains voltage

is applied.

7 Operation

Button interface RF-B2-UP • Version: 03.11.2021 • Technical changes and errors expected.

Deletion:

1. Prepare pushbutton interface for deletion:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once for more than 3 seconds until the programming

LED comes on.

• Press the PRG once again for longer than 3 seconds until the programming

LED flashes (= ready for deletion)

2. Deleting a relay or motor control device:

• Switch the voltage supply of the RF-MSG or RF relay UP off and then on

again. The radio connection will be cleared automatically 3 seconds after

the mains voltage is applied.

3.1.6. Control Solexa II

Learn:

1. Prepare control for learning:

•Menubase settings > LEA.

• Please also follow the instructions in the manual.

2. Teaching the pushbutton interface:

• Press the PRG key 1 (for pushbutton 1) or 2 (for pushbutton 2) on the

pushbutton interface once briefly.

The pushbutton is now taught for the control.

Deletion:

1. Deleting a radio connection:

• On the control, call up the menu item base settings > LEA > StAt > settings

key > SET key.

• Please also follow the instructions in the manual.

4. Operation

4.1. Pushbutton functions

Up/Down via the connected up/down double pushbutton

Integrated pushbutton automatics:

• Key pressed briefly = step operation

• Key pressed for a longer time = movement to final position

• Briefly pressing the opposite direction key = stop

On/Off via the connected double pushbutton (pushbutton 1 = on, pushbutton 2= off)

Dimming via the connected up/down double pushbutton

Integrated pushbutton automatics:

• "Up" briefly = ON with the last dimming value.

• "Up" long = brighter

•"Down"briefly=OFF

8 Operation

Button interface RF-B2-UP • Version: 03.11.2021 • Technical changes and errors expected

• "Down" long = darker

4.1.1. Order of the ventilation levels

Ventialtion units WL305/610 and WL400/800:

Exhaust air 8 – 7 – 6 – 5 – 4 – 3 – 1 – off– Circulation air 1 – 2 – 3 – 4 – 5 – 6 – 7 – 8

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Elsner Apparecchiature di registrazione

Elsner

Elsner KNX B4-UP Guida

Elsner

Elsner IP KNX interface Manuale utente

Manuali Apparecchiature di registrazione popolari di altre marche

KV2 Audio

KV2 Audio 500 Series Manuale utente

Robotics Technologies

Robotics Technologies microBus-Cam II Manuale utente

Seca

Seca 460 Manuale utente

Cognex

Cognex MVS-8000 Series Manuale utente

Mect

Mect MPNC006 Series Manuale utente

Bad Caf

Bad Caf THE LEASH Manuale utente

Strymon

Strymon NIGHTSKY Manuale utente

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente

Tews Technologies

Tews Technologies TPMC465 Manuale utente

Honeywell

Honeywell Excel 50 Manuale utente

SeaLevel

SeaLevel COMM+8.LPCI Manuale utente

Arturia

Arturia AUDIOFUSE STUDIO Manuale utente

Rukra

Rukra RK-1240 Manuale utente

Samson

Samson SCOM Manuale utente

Dynacord

Dynacord DPS260 Manuale utente

Nice

Nice Core Manuale utente

Pyle Pro

Pyle Pro PSS8 Manuale utente

RF-System

RF-System TinyGate Manuale per l'uso e la cura