ELTEC TRAPSOUND Guida rapida alla configurazione

ORGDRIVE CP25

ACCESSORIES

INFORMATIVE MANUAL

Rev. 02 of 20/07/2011

     

INDEX

1 - TRAPSOUND RECORDER pag. 3

1.1 - Parts of the system.............................................................................................pag. 4

1.2 - List of the functions.............................................................................................pag. 5

1.3 - Trapsound recorder with automatic start of the organ

(Code TS25USB-MRA)

..................................................................................................

pag. 5

1.4 - "Trapsound Manager".........................................................................................pag. 6

1.5 - Trapsound Programmer......................................................................................pag. 7

1.6 - Coding of different models..................................................................................pag. 10

2 - CONTROL SYSTEM FOR SWELL BOX pag. 12

2.1 - Parts of the system.............................................................................................pag. 13

2.2 - List of the functions.............................................................................................pag. 14

2.3 - Coding of the products........................................................................................pag. 15

2.4 - Configurations of the system...............................................................................pag. 16



3 - RADIO TRANSMISSION SYSTEM pag. 17

3.1 - Radio/cable transmission system........................................................................pag. 17

3.2 - Coding of different models..................................................................................pag. 18

3.3 - Selectors.............................................................................................................pag. 19

4 - MIDI INTERFACE (Code MIDIKIT) pag. 20



5 - TUNING KEYBOARD pag. 21

5.1 - List of the functions.............................................................................................pag. 21

5.2 - Accessories of the tuning keyboard ....................................................................pag. 22

5.3 - Coding of different models..................................................................................pag. 23

6 - CAPTURES MODULE pag. 25

7 - CONTROL BOARD FOR MAGNETS OF THE STOPS

(Code ORGMARE)

pag. 26

8 -

CONTROL BOARD FOR MAGNETS OF THE VERTICAL STOPS

(Code ORGMARE-V) pag. 27

9 - TRANSPOSER BOARD pag. 28

10 - 61 POWER AMPLIFIERS BOARD pag. 29

11 - 3 POWER AMPLIFIERS BOARD (Code ORG5A) pag. 30

12 - INVERTER BOARDS pag. 30

13 - BUTTON CONTROL BOARD WITH LAMP (Code RELED) pag. 31

     

14 - CONTROL CARD FOR SLIDING STOPS (Code RESCOR) pag. 31

15 - CONTROL CARD FOR REVERSERS (Code ORGREV) pag. 32

16 - STRIP 128 LED FOR SIMULATION pag. 32

17 - POWER SUPPLIES pag. 33

18 - SERIAL CABLE pag. 36

18.1 - Technical board ............................................................................................... pag. 36

19 - CONNECTORS FOR SERIAL CABLE pag. 38

20 - ORGDRIVE CONFIGURATION CABLE pag. 38

21 - USB - SERIAL CONVERTER pag. 38

22 - POCKET (Code ORGPK) pag. 39

23 - DRILL GAUGE (Code DIMA61) pag. 39

24 - REGULATION BOARD FOR HALL SENSORS (Code HALTA TEST ) pag. 40

     

1 - TRAPSOUND RECORDER

The TRAPSOUND recorder is an equipment that allows to do the recording and the

reproduction of single pieces or whole concerts on the organ.

Connected through the serial line to the ORGDRIVE unit in console, it memorize and

reproduce faithfully the condition of input and output.

Optional very easy to install and very reliable, TRAPSOUND offers the following advantages: 

•Recording of single pieces or whole concerts.

•Possibilità to listen the recorded pieces.

•Store up pieces recorded in the inner memory (max 90 pieces x 99 archives).

•Store up pieces on a PC through the use of a FLASH DISK USB key memory and the

proper programme “TRAPSOUND MANAGER”.

•Use of the organ for maintenance.

•Use of the organ when the organist is absent.

•Planning of the automatic execution of one or more pieces at a given hour of a given day

(only with the temporal programmer of events “Trapsound PROGRAMMER”)

Moreover, also during the LISTENING function of a recorded piece, the console remains

enabled. In this way it is possible to use it in parallel to the recorder, activating or

deactivating all the functions and playing at the same time with the piece that one is listening.



     

1.1 - PARTS OF THE SYSTEM

The TRAPSOUND recorder consists of the following parts:

Base unit (Code TSPC25USB)

Aluminium case. Dimensions: 215 x 220 x 80 mm. Power: 220 V - 50 Hz.

It has inside an industrial Pc board (with static hard disk) and a ELTEC manufacture board

(Code TSRE) that interfaces the PC board with the ORGDRIVE system.

LCD display plate and USB connector (Code TSFD2)

Brass plate to install at sight on the console. On this plate there is the USB connector and

the display board (Code TSLCD-USB) for the visualization of the command messages.

To activate these commands four solutions are offered:

1 - Command plate by cable (Code TSTE1F)

Aluminium plate with all the control buttons connected to the base unit TSPC25USB

through a 3 wires shielded cable. It can be installed on the console or at a distance.

It is powered through the cable.

2- Remote control by infrareds (Code TSTE1)

Remote control by infrareds to steer toward the plateTSFD2.

It has to be used in front of the console. 6V battery power supply.

3 - Remote control by radio (Code TSTE1R)

Remote control via radio used at a distance, without having to be directed towards the

plate TSFD2. 6V battery power supply.

It is always possible to use the infrared transmission.

Radio receiver module (Code TSMR1)

It is connected to the base unit TSPC25USB.

4 - Remote control by radio (Code TSTE1R)

Remote control by radio used at a distance, without having to be directed towards the

plate TSFD2. 6V battery power supply.

It is always possible to use the infrared transmission.

Radio receiver module with automatic starting of the organ (Code TSMRA12)

It is connected to the base unit TSPC25USB.

Relay card for the automatic starting of the organ (Code TSRELE12)

It has 2 contacts to use with 220V power for the starting of the console and so of the

organ.

     

1.2 - LIST OF THE FUNCTIONS

LOAD To load pieces to listen.

PLAY To listen a piece.

PAUSE To interrupt the listening of a piece.

INTERMEDIATE To listen a piece from an intermediate value preset.

CONTINUOUS To listen all the pieces in sequence.

ARCHIVE To store the contents of the recording archive or flash disk in an

internal archive.

COPY To copy the contents of the recording archives or of an internal

archives on the flash disk.

DELETE To delete the pieces from the recording archives, from an internal

archives, from the flash disk.

RECORD To record a piece.

TEST To record a test piece without memorizing it in the recording archives.

To listen a test piece without loading it in the listen archives.

DIR (F1) To visualize the number of pieces that are in the internal archives, in

the recording archives, in the flash disk.

OFF (F2) To stop CONSOLE/ORGAN (only mod. TS25MRA).

INFO (F3) To visualize the information of the pieces (title, author, time)

STOP To stop the listening or the recording, to cancel a control.

To visualize the data and the system hour.

ENTER To confirm the controls.

To switch on CONSOLE/ORGAN (only mod. TS25MRA).

1.3 - TRAPSOUND RECORDER WITH AUTOMATIC

STARTING OF THE ORGAN (Code TS25USB-MRA)

Sometimes for using the TRAPSOUND recorder it can be rather uncomfortable to reach the

console, open it and switch on the organ.

The TRAPSOUND recorder with AUTOMATIC STARTING (Code TS25USB-MRA) gives the

possibility to switch on and switch off the console (and therefore the organ) directly with the

use of the remote control.

It is necessary to use an appropriate radio module (Code TSMR2) and a relay card (Code

TSRELE).

     

1.4 - "TRAPSOUND MANAGER"

The programme “TRAPSOUND MANAGER” allows to store up the recording file of a

TRAPSOUND recorder on the hard disk of one’s own PC, with the possibility to give to each

file useful information concerning the recording (Title, Author, Performer, Category, Liturgical

Time, Creation date, Comment).

Then these file can be organized in some listen folder, ready to be reproduced from the

TRAPSOUND recorder.

The main functions of the programme are three:

Import record

[Flash disk USB] [Archives PC]

Display record folder

[Archives PC]

Create new listen folder

[Archives PC] [Flash disk USB]

Available in English, Italian and French, "TRAPSOUND MANAGER" also allows you to print

a printout containing the list of files (and associated additional information) of stored folders

and listen folder.

     

1.5 - TRAPSOUND PROGRAMMER

“Trapsound PROGRAMMER” is a time programmer of events: it allows to plan the

automatic playing of one or more pieces at a certain time on a given day.

The fields of application of this equipment can be several:

- Use of the organ for maintenance and preservation (for example on organs which

have played little, whose lack of use, with the passing of time, compromises its

working).

- Use of the organ for the enhancement of itself and the environment in which it is

located (for example in places of tourist interest, where it is often possible to see the

organ as an aesthetic monument, but one can't appreciate the most important

features: the sound.

- Listening to recorded pieces without direct access to the console and using the

Trapsound recorder.

Trapsound PROGRAMMER is available into two different versions: one for the internal

installation in console, one for the external wall installation (maximum distance from the

console: 200 m).

The potential of the "Trapsound PROGRAMMER" are added to those of the "Recorder

TRAPSOUND", offering a more complete product and able to meet the needs of the final

user.

Base unit PROGRAMMER

for external installation

(Code PROGEXT).

     

Base unit PROGRAMME for external

installation (Code PROGEXT)

connection side.

WORKING

First of all it is important to create an archives of pieces from which to take for the

programming. Pieces must be first recorded on an organ with the "TRAPSOUND Recorder",

stored and named with the "Trapsound MANAGER" software.

All the programming operations are executed on the terminal of the "Trapsound

PROGRAMMER, a TFT 5.7' touch screen monitor, which, thanks to its simple and intuitive

graphical interface, offers ease of use and immediacy of understanding.

Furthermore, the big flexibility of the programming system, allows to create personalized

programmes with different levels of priority, according to the desires of the location and

period of the year.

Once the programming is done and the desired programmes are enabled, it is "Trapsound

PROGRAMMER" that thinks to start the organ at the right time, to control the execution of

one or more pieces and finally to switch off the organ after the playing.

In case "Trapsound PROGRAMMER" finds the console (and so the organ) that is already

started, no control is executed, even if it is programmed. The manual use of the organ is

always priority on the automatic one.

Base unit PROGRAMMER for the installation in console (Code PROGINT ) with display TFT touch

screen 5,7' plate (Code PD5.7).

     

EXAMPLES OF SCREENS

Main screen of "Trapsound PROGRAMMER".

Screen of creation of a programming line

Trapsound Programmer



    



MENU PRIN

CIPALE

SOSPENDI

PROGRAMMAZIONE

RIPRENDI

PROGRAMMAZIONE

PROGRAMMA ABILITATO

NOME PROGRAMMA

PROSSIME LINEE DI PROGRAMMAZIONE

10:30 Linea n. 01 00:05:17

12:00 Linea n. 02 00:12:05

15:00 Linea n. 03 01:01:29

ettagli

Dettagli

TIPO

Programmi

Base (o Prioritari)

Crea 2 di 2

HH:MM:SS

 

 









    



+ + + +

- - -- -







 

!

"



ANNULLA TERMINA

CANCELLA

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Strumento musicale popolari di altre marche

Kawai

Kawai CN17 Manuale utente

Yamaha

Yamaha PCY130 Manuale utente

Korg

Korg SP-170S Manuale utente

Roland

Roland ep-97 Manuale utente

Roland

Roland LX-15 Manuale utente

Johannus

Johannus Rembrandt 200 Manuale utente

Yamaha

Yamaha Clavinova CVP-709 Manuale utente

Yamaha

Yamaha YC-20 Manuale utente

Yamaha

Yamaha Clavinova CVP-609 Manuale utente

Casio

Casio celviano ap-700 Manuale utente

Yamaha

Yamaha PSR-E473 Manuale utente

Modulus

Modulus Quantum Series Manuale utente

Gear4music

Gear4music SDP-4 Manuale utente

HOMCOM

HOMCOM 390-006 Manuale utente

Xotic Guitars

Xotic Guitars ProVintage Series Manuale utente

Sadowsky

Sadowsky MetroLine Series Manuale utente

Bosendorfer

Bosendorfer CEUS Manuale utente

Gewa

Gewa UP 260 G Manuale utente