Elviomex ALFA 500 Manuale utente
OPERATION INSTRUCTIONS ALFA 500
Once the appliance is connected to the power the led No 1 turns on.
After 30 sec of no use the appliance turns into SLEEP MODE and the led 1,
2,3 start running sequentially.
Pressing the main button A the
appliance turns into standby position
from sleep mode and the led No 1 turns
on
Press the main button A to turn on the
appliance. The led No 2 starts flashing
and the appliance starts filling with
water. The appliance will fill with water
and will heat up. The machine is ready
for use when both heater lights (No 7, 8)
go off.
Check if the items to be washed are suitably placed for washing and load the
dishwasher
Att. Before inserting the basket with the items, be sure that all food residues
have been removed
If the machine is not equip with detergent pump add the liquid detergent
manually into the tank.
Select the washing cycle you want
between 1min (led No 4), 2min (led No
5) and 3min (led No 6) using the set
button C.
Push the start button B to start the
washing cycle.
Att. At the hood type models the
washing cycle starts by closing the
hood.
During the washing and rinsing cycle the cycle light (led No 9) stays on.
If for any reason you open the door during the washing cycle immediately the
program resets.
When the cycle light (led No 9) goes off you can unload the dishwasher.
Wash after wash can be performed without the need of heating lights go off or
drain the machine.
At the end of the day press the main
button A to turn the appliance into
draining position the drain light (led No
3) goes on.
Att. Remove the overflow pipe only if
firstly switched to draining position the
appliance using the main button A
Select the draining cycle you want using
the set button C between 1 1/2min (led
No 4), 2min (led No 5) and 3min (led No
6) using the set button C.
Push the start button B to start the
draining cycle.
Att. After the draining cycle the
machine starts self cleaning cycle.
Press the main button A to turn into
standby position the appliance.
In order to ensure the perfect performance, the machine must be completely
cleaned at the end of every working day.
Clean the tank thoroughly using specific detergents and remove any dirt from
inside.
Remove the tank’s filter and clean it under running water without soap.
Remove the rotating washing and rinsing arms and the spraying nozzles and
clean them under running water.
Reposition the parts in reverse order.
After cleaning it is advisable to leave the door open until the next time you will
use the machine.
Auto check - Alarms
ALARM
CURE
Led 1 flashes 1 time every 3 sec
Shut down the appliance and call
technical assistant.
Led 1 flashes 2 times every 3 sec
Shut down the appliance and call
technical assistant.
Led 1 flashes 3 times every 3 sec
The appliance does not filling with
water.
Check the tap or call for technical
assistant.
Led 1 flashes 4 times every 3 sec
Shut down the appliance and call
technical assistant.
Led 1 flashes 5 times every 3 sec
Shut down the appliance and call
technical assistant.
Led 1 flashes 6 times every 3 sec
Shut down the appliance and call
technical assistant.
Led 1 flashes 7 times every 3 sec
The appliance cannot drain the water.
Check if you have removed the overflow
pipe or if the drain hose is strangled.
Led 1 flashes 8 times every 3 sec
Check if the water level into the tank is
low and call technical assistant.
Indice
Altri manuali Elviomex Lavastoviglie
