Elvox 40510 Manuale utente
Instruction manual
40510
7” Due Fili Plus porter switchboard
2
7” Due Fili Plus porter switchboard
GENERAL INFORMATION
Device 40510 is a switchboard for the DueFili Plus video door entry system, equipped with a 7-inch colour screen. It can
be used in hands-free mode or with a handset.
The instruction manual can be downloaded from www.vimar.com
Installation rules
Installation should be carried out in compliance with the current regulations regarding the installation of electrical equipment
in the country where the products are installed.
Regulatory Compliance
EMC directive
Standards EN 60065, EN 61000-6-1 and EN 61000-6-3.
INFORMATION FOR USERS UNDER DIRECTIVE 2002/96 (WEEE)
In order to avoid damage to the environment and human health as well as any administrative sanctions, any appli-
ance marked with this symbol must be disposed of separately from municipal waste, that is it must be reconsigned
to the dealer upon purchase of a new one. Appliances marked with the crossed out wheelie bin symbol must be collected
in accordance with the instructions issued by the local authorities responsible for waste disposal. For more information call
the free-phone number 800-862307.
This product was developed using FreeRTOS
TM
software - http://www.freertos.org/
3
VIMAR group
7” Due Fili Plus porter switchboard
Main functions
The switchboard offers the following functions:
1. making and receiving audio calls with the indoor units;
2. receiving audio/video calls from the speech units;
3. implementing automatic self-starts from the speech units;
4. forwarding speech unit calls to indoor units;
5. calling another switchboard;
6. managing warnings from indoor units;
7. managing speech unit locks, stair lights and system relays;
8. activating CCTV cameras for monitoring purposes;
9. logging calls, warnings and activations.
Advanced functions
1. management of Competence Areas
2. management of operation time bands (Day/Night)
3. interception / non-interception of calls (Indoor/Outdoor mode)
The following languages are supported:
1. Italian
2. English
3. French
4. German
5. Spanish
6. Greek
7. Portuguese
Technical characteristics
Technical data:
• Supply voltage: 28VDC nominal
Power supply via power supply unit 6923 (not supplied)
• Maximum absorption: 300 mA
• Absorption in standby: 86 mA
• 7-inch colour display, 800x480 pixel resolution, 16:9 format
• Ambient class: Class A1 (indoor use)
• Protection degree IP30
• Operating temperature: -5°C to +40°C (indoor use)
• Operating ambient humidity 10 - 80% (non-condensing)
• Electronic chimes with different tunes (10 melodies).
• Dimensions: 242x213x221 mm (WxHxD with support open)
• DIP switch for line impedance termination.
4
7” Due Fili Plus porter switchboard
Front view
Keyboard
Handset
Screen
Rear and side view
Mini USB connector
for connection to
a PC
RJ45 socket for connection
to the Due Fili Plus system
via stud
Dip switch for video
termination
5
VIMAR group
7” Due Fili Plus porter switchboard
Keyboard
Key Description
Menu / Select
Exit / Cancel
Up
Down
Alphanumeric keys
Hands-free
End Conversation
Internal / External
Day / Night
Self-start
Keyboard lock
Hold
Input / Transfer
F1 (programmable)
F2 (programmable)
Contacts List
List of alert notifications
Events list
Lock
6
7” Due Fili Plus porter switchboard
Indicators
LED Status Description
Steady light Power - Switchboard on
Steady light Switchboard connected to a PC via USB
Flashing light Unanswered call indication and/or alert notification
7
VIMAR group
7” Due Fili Plus porter switchboard
External connections
Switchboard 40510 is connected via the “Interconnecting stud” and the corresponding RJ45 Cat. 5E connection cable
supplied.
+U +I
PRI
-
6923
BU OG BK RD
WHBNYEGN
**
Important: Strictly observe the connections on the con-
necting stud. Inverted wiring connections may lead to the
switchboard being damaged.
**
Due Fili Bus
Important: The maximum connection dis-
tance between power supply unit 6923
and the interconnecting stud is 10 m.
Interconnecting
stud
Length: 3 m
Mains
Power
Supply unit
8
7” Due Fili Plus porter switchboard
+U +I
PRI
-
6923
BU OG BK RD
WHBNYEGN
• Note: We recommend connecting the cables with a fork Faston of a size suited to the stud screws, and inserting
it between the head of the screw and the washer, arranging the cables so as to avoid contact between adjacent
Fastons.
Connection correspondence table: interconnecting stud - Due Fili system
Connection box terminals Connection box wire colour Due Fili audio / video door entry system
BU 1•
Blue 1 (Due Fili Bus)
OG 2•
Orange 2 (Due Fili Bus)
BK 3•
Black from power supply unit 6923 terminal -
RD 4•
Red from power supply unit 6923 terminal +I
GN 5•
Green -
YE 6•
Yellow -
BN 7 •
Brown -
WH 8•
White -
Access hole for Due Fili
Bus and power supply
cables
to switchboard
Video Termination
Select DIP switch to terminate the video signal
A) if the BUS cable enters terminals BU (1), OG (2) of the switchboard interconnecting stud and continues to another indoor
unit.
B) when a BUS cable with typical impedance of 100 Ohm (Elvox cable 732I or 732H) enters terminals BU (1), OG (2) of the
interconnecting stud and the riser stops in the switchboard.
C) when a BUS cable with typical impedance of 50 Ohm (Cat. 5 or Cat. 6 twisted pair cable) enters terminals BU (1), OG (2) of
the interconnecting stud and the riser stops in the switchboard.
9
VIMAR group
7” Due Fili Plus porter switchboard
GRAPHICAL INTERFACE
First line
The following icons may appear on the first line of the screen, starting from the left:
The ringtone is disabled. The switchboard nevertheless accepts calls and it is possible to answer.
A notification that a door is open has been received.
The microphone is disabled.
The keyboard is locked.
The conversation is taking place in hands-free mode.
The conversation is taking place via the handset.
Internal mode
External mode
Internal mode with call filter enabled
External mode with call filter enabled
Automatic Internal/External enabled
Automatic Internal/External disabled
Last line
The date and time appear on the last line, in the format chosen during configuration.
10
7” Due Fili Plus porter switchboard
Standby
Stand-by screen
The switchboard enters standby mode after a specified time. In this mode, screen brightness is reduced and electricity
consumption limited.
If a function button is pressed when the switchboard is in standby, that function is implemented immediately once the
switchboard has awoken. In standby, the key wakes up the switchboard without implementing any other functions.
Keyboard
The keys carry out their functions when released.
If pressed for at least 0.5 seconds, the following keys perform another function:
KEY STANDBY TALKING
Ringtone mute Microphone mute
(Not applicable) Change parameter in adjustment
Self-start list
Activation list
To serve similar events “indirectly” (Not applicable)
To serve similar alerts “indirectly” (Not applicable)
With events / alert filter enabled, enter the
filter ID.
(Not applicable)
When viewing the contacts list, exit directly
to standby if the filter is enabled
(Not applicable)
When viewing events / alert, to delete them
after entering the installer PIN
(Not applicable)
During clock adjustment, requests the date/
time from the device configured as Master
Clock
(Not applicable)
Indice
Altri manuali Elvox Sistema di interfono
Elvox
Elvox Vimar K40947 Manuale utente
Elvox
Elvox 12B2 Guida
Elvox
Elvox Giotto 6341 Manuale utente
Elvox
Elvox TAB 7529 Manuale utente
Elvox
Elvox 6931 Istruzioni per il montaggio
Elvox
Elvox PETRARCA 6209 Manuale utente
Elvox
Elvox Giotto 6344 Manuale utente
Elvox
Elvox 637G Manuale utente
Elvox
Elvox Digibus 1284 Guida
Elvox
Elvox Vimar 40610.S Guida utente
Elvox
Elvox 62KF Manuale utente
Elvox
Elvox 6358 Manuale utente
Elvox
Elvox 884G Manuale utente
Elvox
Elvox 885A Manuale utente
Elvox
Elvox 6901 Manuale utente
Elvox
Elvox 1200 Series Istruzioni per il montaggio
Elvox
Elvox 8100 Series Manuale utente
Elvox
Elvox 6620 Manuale utente
Elvox
Elvox VIMAR TAB 40505 Guida utente
Elvox
Elvox 6611/F Manuale utente
