ELWING E1 500 Manuale utente
E1 500
USER GUIDE
Congratulations! you are now part of the Elwing Family.
Congratulations for your new purchase! We'd like to thank you for the
trust you put on us.
You feedback on the board and on the way you ride it is important to us
and to many. Feel free to share your feedback and videos on your social
media using #elwingboards !
Before you start riding, please make sure you read the instructions and
wear a helmet.
Ride safe and enjoy!
Quentin, Gael, Pierre, Antoine.
The Elwing Team.
P.S: Join the Elwing Board Riders group on Facebook !
At Elwing Boards, we focus on creating high quality products,
respecting the best concepts in the skateboard industry and
integrating the latest electric technology.
Please read carefully the whole guide before using your new
board.
Please read the following safety recommendations before
using your board:
IMPORTANT
2
1. Always wear protective gears including a helmet, knee, elbow and
wrist guards.
2. Respect local regulations concerning electric skateboards. Respect
cyclists, pedestrians, drivers. You NEVER have priority. If there is no
regulation, please avoid using your board in public places.
3. Using an electric skateboard is not recommended for people younger
than 14 years old.
Never use an electric skateboard under the influence of alcohol
or drugs.
.
4.
5. Do not use an electric skateboard on a wet surface. Avoid rough
surfaces. The best use is on smooth and clean surfaces.
6. The electric brake only helps to slow down. It will NOT completely
stop. Control your speed at any time.
7. Check all the screws and bolts before each session. Mistreating your
Elwing Boards may cause the loss of the warranty.
8. This electric skateboard is made for cruising, not for skateboard tricks..
9. Elwing is not liable for any damage or injury caused by unsafe or
faulty repairs. Any repairs made to this product by unauthorized service
technicians are the responsibility of the owner.
.
10. Enjoy riding your Elwing board!
E1 500
DESCRIPTION
1. SKATEBOARD
3. REMOTE
4. SKATE TOOL
2. CHARGER
Side view
The sync button
The battery
the main switch
Top view Back view
Kids safety
slow mode
SLIDER
ON/OFF
button
SPEED
mode button
(FAST/SLOW)
Front view Back view
3
Wheels
nut key
Kingpin
nut key
Truck nut key
Allen
wrench 3,1
4
1. RECHARGE THE ELWING BOARD BATTERY BEFORE ITS FIRST
USE.
2. PUT THE 2 BATTERIES (STANDARD AAA) IN THE REMOTE
CONTROL.
INSTALLATION
2 batteries
Back view
1. SWITCH ON THE BOARD. THE SWITCH LED WILL FLASH ONCE.
2. SWITCH THE REMOTE CONTROL ON. THE LED ON THE REMOTE
WILL FLASH BLUE EVERY 3 SECONDES, MEANING THE
REMOTE IS ON.
SWITCH ON
Side view
ONOFF
BATTERY GAUGE
Note: If you need to change to a new remote control,
please synchronize the new one before its first use.
1. THE SYNC BUTTON IS BLINKING BLUE, MEANING THAT THE
CONNECTION WITH THE BOARD IS SUCCESSFUL.
2. YOU’RE GOOD TO GO !
Side view
When the board is switched on and connected to
the remote you can check the battery gauge on
the power switch.
Full power
Medium battery
Low battery
Side view Side view
5
MODE
Note: We recommend to use the SLOW mode for
beginners.
1. FAST/SLOW: CHOSE YOUR MODE ON THE LEFT SIDE OF THE
REMOTE.
2. KIDS SAFETY SLOW MODE: THERE IS AN EXTRA BUTTON
INSIDE THE BATTERY COMPARTMENT TO DISABLE THE SLOW
MODE FUNCTION. PULL THE BUTTON TO THE LEFT AND THE
SKATEBOARD SETTINGS WILL BE BLOCKED ON SLOW MODE
WITH SMOOTH ACCELERATION, SMOOTH BRAKING AND
SLOWER MAX SPEED.
To the Left To the Right
Kids Safety slow
Mode
Unlock fast Mode
Fast
Slow
Back view
REVERSE FUNCTION
FORWARD / BACKWARD: Push the main button forward
to speed up progressively. Pull it backwards to brake.
Once the board has stopped, the reverse can start if you
keep pulling the joystick.
Note: When you go reverse you can brake by pushing the
joystick forward.
SYNCHRONIZATION
When the remote is synchronized with the board
the sync button on the board is blinking blue.
blue
anymore. This is the process to
remote to the
If for some reason this button is not blinking
anymore this means the remote is not synchronized
with the board
synchronise the remote (or a new
board).
1. PLEASE MAKE SURE THAT THE BOARD AND THE REMOTE ARE
SWITCHED OFF. THE REMOTE IS ON «SLOW MODE»,
AND THE «CHILD SAFETY» IS ON
2. SWITCH THE BOARD ON. USE A PAPERCLIP TO PRESS THE SYNC
BUTTON. THEN THE SYNC BUTTON WILL TURN OFF.
3.
To the left
Slow mode is
activated
Back view
Side view
Paperclip
6
REMOTE IS OFF. ACTIVATE THE SLOW MODE WITH THE BUTTON
ON THE SIDE. INSIDE THE AAA BATTERY COMPARTEMENT YOU
WILL FIND THE KID SAFETY MODE, PRESS IT TO THE LEFT
(TURTLE MODE).
4.
Hold 10
seconds
This electric skateboard comes with an external
charger.P lug the charger on the skateboard, then
shows a red LED
is complete. Keep the Elwing Board full
Do not leave the
not use it, please recharge the battery every 2
battery will not get
CHARGE
on the wall plug. The charger
when charging which turns green when the
charging
charged as much as possible.
Elwing Board unused for over 2 months. Even if you
do
months to make sure the
damage.
Note: Do not use any other charger to charge the
It could damage the board and produce
BATTERY
Avoid negative temperatures or above 40°C.
Do not let the board without use or charge for
over 1 month. Do not disassemble the power drive
and electronic components.
Do not short circuit.
Elwing Board.
accidents.
7
FOR 6 SECONDS. THE REMOTE WILL BLINK BLUE 3 TIMES IN A
ROW AND THEN THE SYNC BUTTON ON THE BOARD WILL BLINK
BLUE WHICH CONFIRMS THAT THE CONNECTION IS NOW
SUCCESSFUL.
MAINTENANCE
1. Battery: The Elwing Board is equipped with a
that can be charged and
battery
2. Wheels: The warranty does not cover normal
WARNING
Risk of explosion if the battery is not correctly
replaced. Use ONLY batteries that are identical
as the original batteries, provided and
Lithium-ion battery
discharged over 500 times, After which the
might lose around 20% of its capacity.
3. Bearings: Damaged bearings can be dangerous
or abnormal noise, please replace them with any
bearing on the market.
damaged, please avoid contact with water and dust.
and increase
standard skateboard
To reduce the risk of getting the bearings
4. Motor: The motor is extremely resistant. If it ever
noise, please contact us for
5. Check all the screws and bolts before each
makes any abnormal
maintenance.
session.
8
wear and tear
9
T
ROUBLESHOOTING
I
f your Elwing Board is not running, please make
s
ure your battery is full. if your Elwing board is
anormal noise,
n
ot running properly or make
s
top using it immediately.
I
f your Elwing Boards does not work,
p
lease check the followin
g
:
Indice
Altri manuali ELWING Altro
