Embedded Systems LogicMachine Reactor Lite Manuale utente
Embedded Systems SIA, VAT No LV40003411103
47. Katolu str., Riga, LV 1003, LATVIA
LogicMachine Re:actor Lite
Re:actor Lite is your easiest way to
program complex logic in KNXnet/IP,
Modbus TCP, BACnet IP networks.
Re:actor Lite will enable you efficiently
customize building automation
processes, easily delivering unlimited
flexibility benefit to end users in a cost-
effective way.
Re:actor Lite is an embedded
platform with integrated Ethernet,
Serial interface, 34 I/O ports.
ENG - Data sheet
Issue date 12.06.2015
Application
Logical functions; I/O device; WEB SCADA visualization for PC and touch-devices; cross-
standard IP gateway; integration with third party devices over RS485 serial port –AV, IR,
HVAC; Data logger with trends; Thermostat etc.
2
Types of product
LogicMachine3 Re:actor Lite LM3-REACTOR-L
Standards and norms compliance
CE conformity: EMBS-CE-111231/01 Electromagnetic compatibility
EMC: EN61000-6-1
EN61000-6-3
PCT Certificate
Technical data:
Power supply: 7-36V DC, 24V DC Power over Ethernet
recommended. supported
Power consummation: 1.5W
Interface:
10BaseT/100BaseTX 1
RS485 1
1-Wire 1
Binary inputs 18
Digital outputs 16; 380 mA continues current
on output
Connections:
Power supply: , 1.5mm2
Serial: , 1.5mm2
IO: , 1.5mm2
Operating elements LED 1 –CPU load
1 - Activity
Enclosure: Material: Polyamide
Color: Gray
Dimensions: 104(W)x90(H)x32(L) mm
Usage temperature: -5C ... +45C
Storage temperature: -25C ... +55C
Weight: 150g
Warranty: 2 years
3
Caution
Security advice
The installation and assembly of electrical equipment may only be performed by skilled
electrician. The devices must not be used in any relation with equipment that supports,
directly or indirectly, human health or life or with application that can result danger of
people, animals or real value
Mounting advice
The devices are supplied in operational status. The cables connections included can be
clamped to the housing if required.
Electrical connection
The devices are constructed for the operation of protective low voltage (SELV). Grounding
of device is not needed. When switching the power supply on or off, power surges must be
avoided.
4
Default IP configuration
Login name
admin
Password
admin
IP address
192.168.0.10
Network mask
255.255.255.0
Reset device
You can either reboot the device by pressing RESET button or reset the configuration to factory
defaults:
Press and hold for <10 sec –reboot the device
Press and hold for >10 sec –reset networking with IP to factory default
Press and hold for >10 sec and again press and hold for >10 sec –full reset of
configuration to factory defaults
5
Connection diagrams
Powering through PoE + Digital input
6
Digital output (e.g. external relay)
7
1-Wire
Indice
Altri manuali Embedded Systems Controllori
Embedded Systems
Embedded Systems LogicMachine5 Manuale utente
Embedded Systems
Embedded Systems LM5p-GSMC Manuale utente
Embedded Systems
Embedded Systems PT1000 Guida alla risoluzione dei problemi
Embedded Systems
Embedded Systems LogiMachine5 Power Manuale utente
Embedded Systems
Embedded Systems LogicMachine5 Manuale utente
