Embedos EM Manuale utente

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

User Manual and Installation

IO Data Logger + 4G Gateway

April 2022

Version 1.0.0

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

DISCLAIMER

by any means, including photocopying, recording, or other electronic or mechanical methods, without the

prior written permission of the publisher. For permission requests, write to the publisher, addressed

“Attention: Permissions Coordinator,” at the address below.

Embedos Engineering LLP

Mumbai

info@embedos.io

www.embedos.io

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

Document Revisions

Date

Version Number

Document Changes

16-05-2022

1.0.0

Initial draft

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

Contents

1) Preface:................................................................................................................................................. 5

2) IO description: ...................................................................................................................................... 6

3) Connection diagram:.............................................................................................................................7

4) Application Overview:..........................................................................................................................8

5) Web utility Overview: .......................................................................................................................... 9

a. Connecting to IO logger using WiFi:....................................................................................................9

b. Dashboard page description:...............................................................................................................10

c. Configuration page description:..........................................................................................................13

i. Parameter configuration overview table:........................................................................................13

ii. Configuration of parameters settings:.............................................................................................13

iii. Calibration Diagnostic section:.......................................................................................................14

iv. Analog Input Calibration Section:..................................................................................................15

v. Logging Interval configuration:......................................................................................................19

vi. RPM Scan time configuration: .......................................................................................................19

vii. Output delay configuration:............................................................................................................20

viii. Debounce time configuration: ........................................................................................................21

d. Reports page description:....................................................................................................................23

e. Networks and RTC configuration page description: ..........................................................................25

i. Wifi Configuration section: ............................................................................................................25

ii. Wifi Status section:.........................................................................................................................26

iii. RTC configuration section:.............................................................................................................27

iv. MQTT configuration section:.........................................................................................................28

v. OTA firmware update section:........................................................................................................29

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

1) Preface:

Purpose of Document

The document covers Installation and usage of Embedos EM IO Data Logger and 4G

gateway.

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

2) IO description:

IO logger is currently provided with the following configuration.

Digital Inputs:

1) Pulse Input (To measure RPM value input as digital pulse)

Analog Input:

1) Analog Channel 1 Input (User configurable analog parameter 4 –20 mA)

2) Analog Channel 2 Input (User configurable analog parameter 4 –20 mA)

3) Analog Channel 3 Input (User configurable analog parameter 4 –20 mA)

4) Analog Channel 4 Input (User configurable analog parameter 4 –20 mA)

Digital Outputs:

1) Digital Output for Analog Channel 1 Set point.

2) Digital Output for Analog Channel 2 Set point.

3) Digital Output for Analog Channel 3 Set point.

4) Digital Output for Analog Channel 4 Set point.

5) Digital Output for RPM Set point.

HMI:

1) 1.5” OLED display.

2) Web based utility to view real-time data, download reports and configure device

setting/parameters.

Data Storage(Logging):

1) SD card for local data storage and logging.

Connectivity:

SIM card for 4G connectivity.

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

3) Connection diagram:

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

4) Application Overview:

The IO data logger is designed to log data to device as analog inputs, a pulse input which

is to be converted to RPM value. The logger is able to also display real-time data on a

webpage based utility. The user can interact with the data-logger to configure and view

all the settings and device parameters currently running on the device. The logger can

store real-time data and send the same data via MQTT to a broker.

The IO data logger is provided with following connectivity interfaces:

i. Wifi to connect to an SSID for MQTT data transmission and access to webpage.

ii. 4G to connect to a network for MQTT data transmission.

The device is configured to monitor and log data of five parameters.

Parameter 1 to 4 are analog input parameters corresponding to the devices 4 Analog

inputs respectively. These parameters can be user configurable.

Parameter 5 is RPM parameter and will always output calculated RPM value measured

through the devices Digital Input 1.

Note: Parameter 5 value RPM cannot be interchanged with other parameters.

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

5) Web utility Overview:

a. Connecting to IO logger using WiFi:

To access the devices web utility page the user can either connect the computer/laptop to

the WiFi AP (Hotspot) generated by the device.

The default credentials for his AP are as follows:

SSID : EM-7C:87:CE:09:DA:D8

Password : Edge@12345

Default IP : 192.168.4.1

On successful connection to the AP, the web based utility of the device can be accessed by

typing the default IP (192.168.4.1) in any web browser.

The device will then load the web utility on the browser.

To access the devices web utility when the device is connected to a WiFi network, the

computer must also be connected to the same network.

The device will display the SSID it is connected to on the OLED display. The device will

also display an IP address which it has acquired.

The user can access the web utility by entering this IP address in the computer.

The device will then load the web utility on the browser.

IODataLogger +4GGateway

info@embedos.io

www.embedos.io

b. Dashboard page description:

The Dashboard page is loaded when the user enters the devices IP (Default station IP

192.168.4.1 if connected to WiFi AP or Assigned DHCP IP when connected to an SSID) on

the browser.

The User can use the navigation side bar on the left side of the web utility to switch to

different pages of the web utility. It can be accessed by hovering over the side bar on the

extreme left side of the webpage.

The navigation side bar is shown in the below picture.

Indice

Altri manuali Embedos Registratore di dati

Embedos

Embedos EDGE Manuale utente

Manuali Registratore di dati popolari di altre marche

TESTO

TESTO 176 Manuale utente

HT Italia

HT Italia XL421 Manuale utente

HBM

HBM SOMAT XR CX22B-R Manuale utente

Agtrix

Agtrix 380i Manuale utente

Hobo

Hobo H8 Pro Manuale utente

Beijing ART Tech

Beijing ART Tech PCI2320 Manuale utente

Athena

Athena GET SL1 Manuale utente

Motec Systems

Motec Systems C185 Manuale utente

Beijing ART Tech

Beijing ART Tech USB2832 Manuale utente

Rotronic

Rotronic HygroLog HL20 Manuale utente

MRC

MRC DW-6092 Manuale utente

Racelogic

Racelogic VBOX LapTimer Manuale utente

Edu-Logger

Edu-Logger 900-240 Manuale utente

Elma

Elma DT173 Manuale utente

MadgeTech

MadgeTech PRTemp140 Scheda tecnica

Comet

Comet U0121M Manuale utente

pico Technology

pico Technology PT-104 Manuale utente

Soil Instruments

Soil Instruments GTecLink Manuale utente