Embraco Fullmotion CF10C Manuale utente

FULLMOTION COMPRESSORS

ELECTRONIC INVERTER

Product Manual

Fullmotion CF10C

www.embraco.com October, 2018 Revision 2.1

BEFORE YOU BEGIN

WARNING

NOTICE

CAUTION

Incorrect operation could result in bod-

ily injury or death due to electrical haz-

ard.

WARNING

NOTICE

CAUTION

Incorrect operation could cause bod-

ily injury or could result in equipment

damage.

WARNING

NOTICE

CAUTION

Contain helpful suggestions or refer-

ences to material not covered in this

document.

Contents

1 INTRODUCTION 1

1.1 Productdescription ............................. 2

1.1.1 Stand alone inverter . . . . . . . . . . . . . . . . . . . . . . . . 2

1.1.2 Instituteapproval.......................... 2

1.2 VNE compressor series description . . . . . . . . . . . . . . . . . . . . 3

1.3 FMF and VEG compressor series description . . . . . . . . . . . . . . . 4

1.4 Producthandling............................... 4

1.5 Dimensions(mm) .............................. 5

1.5.1 FMF and VEG compressor series . . . . . . . . . . . . . . . . . 5

1.5.2 VNE compressor series . . . . . . . . . . . . . . . . . . . . . . . 6

1.6 Packageinformation............................. 6

2 TECHNICAL SPECIFICATIONS 8

2.1 Nomenclature ................................ 8

2.1.1 Labelinformation.......................... 9

2.2 Productspecications............................ 9

2.3 Inverterenclosure .............................. 11

2.3.1 Product dimensions . . . . . . . . . . . . . . . . . . . . . . . . 11

2.3.2 Connectors.............................. 11

2.3.3 Productdiscards .......................... 14

2.4 Information about input inrush current . . . . . . . . . . . . . . . . . . 15

3 INSTALLATION 16

3.1 Assemblyinstructions............................ 16

3.1.1 VEG and FMF compressor cable connection . . . . . . . . . . 17

3.1.2 VNE compressor cable connection . . . . . . . . . . . . . . . . 19

3.1.3 Forced ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.1.4 Optional AC Fan switch control . . . . . . . . . . . . . . . . . . 24

3.1.5 Inverter cables arrangement . . . . . . . . . . . . . . . . . . . 25

3.1.6 Input cable with ferrite lter . . . . . . . . . . . . . . . . . . . . 27

3.2 Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4 OPERATION 29

4.1 Frequency control mode . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.2 Drop-Incontrolmode ............................ 31

4.2.1 First time Pull-down . . . . . . . . . . . . . . . . . . . . . . . . 32

4.2.2 Normalcycling............................ 32

4.2.3 Connection.............................. 32

CONTENTS

4.3 Serialcontrolmode ............................. 33

4.3.1 Serial specications and Internal Circuit . . . . . . . . . . . . . 33

4.3.2 Commands.............................. 35

5 DIAGNOSTICS 39

5.1 LEDindication ................................ 39

5.2 Troubleshooting ............................... 40

GENERAL PRECAUTIONS

WARNING

NOTICE

CAUTION

• During instalation the environment must be prop-

erly protected against ESD. The operator and ma-

chines must be properly Earthed.

• Make sure that Fullmotion CF10C Inverter will not

be in direct contact with ames during assembly.

• The location where the Inverter will be installed

must be protected against splashed water from all

directions.

• Do not open the Inverter enclosure. For installa-

tion, remove only the Inverter Cover to make the

electrical connections.

WARNING

NOTICE

CAUTION

• This inverter is for use only with the Fullmotion Em-

braco compressors.

• Read this material carefully before you begin the

Fullmotion CF10C Inverter installation and start up

procedure.

• To prevent damage to your inverter during and af-

ter assembly, avoid contacting with the following

substances: Hydrocarbons; Ester based oils (e.g.:

compressor oil); Phenols; Amines; Ketenes; Au-

tomotive uids such as grease, except glycol and

heavy alcohol.

WARNING

NOTICE

CAUTION

• The protection against access to live parts have

been evaluated according to the relevant require-

ments from IEC 60335-1 and UL 60730-1.

Chapter 1

INTRODUCTION

Embraco’s Fullmotion compressors are ideal for commercial applications where

wide voltage range, fast pull down, better performance, ne temperature control,

lower power consumption and very low noise and vibration levels are required.

This is possible thanks to the use of an electronic inverter capable of driving the

compressor at dierent speeds and consequently, controlling its refrigeration ca-

pacity.

Eciency

Fullmotion Compressors technology al-

lows the compressor to operate at dif-

ferent speeds, adjusting it according to

demand. When side by side with a con-

ventional compressor, the energy con-

sumption is up to 45%.

Flexible

Indicated for commercial refrigeration

system, provides more exibility in cus-

tomized solutions through inclusion of

electronics already coupled to the com-

pressor, opening a wide variety of appli-

cations.

CHAPTER 1. INTRODUCTION 2

1.1 Product description

1.1.1 Stand alone inverter

Figure 1.1: Stand alone view

Composed by

Indicator Description

1 Plastic body

2 Plastic cover

3Compressor cable

output connection

Input/ Earth/

Communication

cables connection

WARNING

NOTICE

CAUTION

CF10C inverter series are designed to

be used only in built in appliances, with

not accessible machine compartment.

1.1.2 Institute approval

Institute approval

CF10C Inverter Approved according to

EN 60335-1

CHAPTER 1. INTRODUCTION 3

1.2 VNE compressor series description

1.Product descripton

1- Fence cover

2- OLP

3- 3/4 OLP

4- Cord anchorage

5- Screw

6- Grommets

7- Compressor shell

8- Process tube

9- Discharge tube

10- Suction tube

WARNING

NOTICE

CAUTION

• Before you begin your installation observe

technical specications and proper connec-

tions.

• Check if product is properly identied and if

it’s enclosure is without cracks.

CHAPTER 1. INTRODUCTION 4

1.3 FMF and VEG compressor series description

1-Fence cover

2-Cord anchorage

3-Screw

4-Grommets

5-Compressor shell

6-Process tube

7-Discharge tube

8-Suction tube

1.4 Product handling

WARNING

NOTICE

CAUTION

• Inverter is sensitive to Electrostatic Dis-

charges. Take care with product handling

until nal assembly.

• Special care must be taken to avoid me-

chanical impacts on the inverter during

assembly process.

• The environment must be properly pro-

tected against ESD.

• The workers that handle the inverter must

be Earthed through adequate ESD wrist

strap and must wear ESD gloves.

• Do not hold by the wiring.

• Do not use the inverter if it drops during

handling.

CHAPTER 1. INTRODUCTION 5

1.5 Dimensions (mm)

1.5.1 FMF and VEG compressor series

173.3

85.5

133.3

217.3

(INVERTER)

199.5

241

202

Indice

Altri manuali Embraco compressore d'aria

Embraco

Embraco Compressor Istruzioni per l’uso

Embraco

Embraco Scroll SE6015GS-O Manuale utente

Manuali compressore d'aria popolari di altre marche

Sparmax

Sparmax DC-25XR Manuale utente

KAESER

KAESER M122 Manuale utente

GMC

GMC GAC1500 Manuale utente

Briggs & Stratton

Briggs & Stratton Air Compressor Manuale utente

Fini

Fini F3GST2TK Manuale utente

Industrial Air

Industrial Air CP1580325 Manuale di programmazione

Campbell Hausfeld

Campbell Hausfeld RP3300 Guida rapida

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuale utente

Hitachi

Hitachi EC99S Manuale dell'operatore

Parkside

Parkside PKO 270 A1 Manuale utente

Sullair

Sullair 185 Manuale utente

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuale utente

Ferm

Ferm CRM1046 Manuale utente

BE AC153 Manuale utente

RIDGID

RIDGID OF25150A Manuale utente

Johnson Controls

Johnson Controls QUANTUM LX Manuale

Sears

Sears Craftsman 919.167463 Manuale utente

Ring Automotive

Ring Automotive RAC700 Manuale utente