EMC VNXe3100 Manuale utente

EMC®VNX™
VNXe3100™
Installation Guide
P/N 300-011-183
REV 05

VNXe3100 Installation Guide
2
Copyright © 2012 EMC Corporation. All rights reserved. Published in the USA.
Published June, 2012
EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without
notice.
The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kind with respect
to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular
purpose. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.
EMC2, EMC, EMC Centera, EMC ControlCenter, EMC LifeLine, EMC OnCourse, EMC Proven, EMC Snap, EMC SourceOne, EMC Storage
Administrator, Acartus, Access Logix, AdvantEdge, AlphaStor, ApplicationXtender, ArchiveXtender, Atmos, Authentica, Authentic
Problems, Automated Resource Manager, AutoStart, AutoSwap, AVALONidm, Avamar, Captiva, Catalog Solution, C-Clip, Celerra,
Celerra Replicator, Centera, CenterStage, CentraStar, ClaimPack, ClaimsEditor, CLARiiON, ClientPak, Codebook Correlation
Technology, Common Information Model, Configuration Intelligence, Connectrix, CopyCross, CopyPoint, CX, Dantz, Data Domain,
DatabaseXtender, Direct Matrix Architecture, DiskXtender, DiskXtender 2000, Document Sciences, Documentum, elnput, E-Lab,
EmailXaminer, EmailXtender, Enginuity, eRoom, Event Explorer, FarPoint, FirstPass, FLARE, FormWare, Geosynchrony, Global File
Virtualization, Graphic Visualization, Greenplum, HighRoad, HomeBase, InfoMover, Infoscape, InputAccel, InputAccel Express, Invista,
Ionix, ISIS, Max Retriever, MediaStor, MirrorView, Navisphere, NetWorker, OnAlert, OpenScale, PixTools, Powerlink, PowerPath,
PowerSnap, QuickScan, Rainfinity, RepliCare, RepliStor, ResourcePak, Retrospect, RSA, SafeLine, SAN Advisor, SAN Copy, SAN
Manager, Smarts, SnapImage, SnapSure, SnapView, SRDF, StorageScope, SupportMate, SymmAPI, SymmEnabler, Symmetrix,
Symmetrix DMX, Symmetrix VMAX, TimeFinder, UltraFlex, UltraPoint, UltraScale, Unisphere, Viewlets, Virtual Matrix, Virtual Matrix
Architecture, Virtual Provisioning, VisualSAN, VisualSRM, VMAX, VNX, VNXe, Voyence, VPLEX, VSAM-Assist, WebXtender, xPression,
xPresso, YottaYotta, the EMC logo, and the RSA logo, are registered trademarks or trademarks of EMC Corporation in the United States
and other countries. Vblock is a trademark of EMC Corporation in the United States.
All other trademarks used herein are the property of their respective owners.
For the most up-to-date regulatory document for your product line, go to the technical documentation and advisories section on the
EMC online support website.

EMC VNXe3100 Installation Guide
3
CONTENTS
Unpack your system
Unpack the shipping boxes ........................................................................................ 4
Prepare your system
Before you begin ........................................................................................................ 5
Installation requirements ........................................................................................... 5
Rack & Install
Install the disk processor enclosure (DPE) .................................................................. 7
Install the DPE rails .............................................................................................. 7
Install the disk processor enclosure ..................................................................... 8
Install Disk Array Enclosures (DAEs).......................................................................... 10
Install the DAE rails ............................................................................................ 10
Install the disk array enclosures ......................................................................... 11
Cable the DPE to DAE ............................................................................................... 12
Attach storage processors to the network ................................................................. 14
Power up.................................................................................................................. 15
Verify status LEDs..................................................................................................... 17
Attach the bezels ..................................................................................................... 18
Connect
Automatically Assigning a Dynamic VNXe Management Port IP Address.................... 20
Manually Assigning a Static VNXe Management Port IP Address ............................... 21

4
VNXe3100 Installation Guide
Unpack your system
This document applies to both single and dual SP configurations. If you have a single SP
configuration, ignore references to SP B.
Unpack the shipping boxes
Verify that you have received all of the system components, including cables, bezels, rails, and
screws (shown below).
Figure 1 Shipping Contents
Disk-array enclosure (Optional)
(DAE)
Disk processor enclosure
(DPE)
SAS (serial attached SCSI) cables
2 per DPE
1 per DPE
Bezel with key
X4
6Gb SAS
1
#
X4
6Gb SAS
X4
6Gb SAS
1
#
X4
6Gb SAS
1
1
G
b
E
01
X4
6Gb SAS
6Gb SAS
23
1
1
G
b
E
01
X4
6Gb SAS
6Gb SAS
23
1
0
1
0
Installation
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
Installation
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
SAS 450 GB 15K RPM
Front
Rear
Adjustable rail kit
Screws
Power cords
2 per DAE
Service cable
2 per DAE
Front
Rear
Adjustable rail kit
Screws
Power cords
Bezel with key
Documentation kit, including Installation
Guide, Quick Start poster, Configuration
Worksheet and sheet of cable labels.

Before you begin
5
Prepare your system
Use the “Before you begin” checklist to help you determine what you need to install for your
system.
Before you begin
Installation requirements
Completed Task Comments
1. Setup a product support account. If you do not already have a Product Support account, go to
EMC.com/vnxesupport to set one up.
You will need a support account for access to the latest
documentation and troubleshooting information, online
chat, installation and maintenance videos, utilities and
wizards.
2. Complete the VNXe Series
Configuration Worksheet.
The VNXe Series Configuration Worksheet is provided in the
documentation package with the system.
It is also available for download from the VNXe Product page.
Requirement Description
AC Power For high availability: At least two 110 or 240 V AC circuits are required.
Types of plugs: C13 and C14
Network • Two 1-Gigabit Ethernet management connections
• Two to four 1-Gigabit Ethernet data connections for CIFS, NFS, and iSCSI connectivity
• CAT5e or better cables for each connection to network
• DNS and NTP servers accessible from the VNXe system (recommended)
• Windows Domain Controller (recommended)
• SMTP server network connection to the VNXe3100 and the management host (optional)
Network
information
If you are using the VNXe Connection Utility, the management port and login information required
include:
• A static IP address for the system
• The subnet mask of the LAN to which the system is connected
• The default gateway address of the LAN to which the system is connected
• System usernames and passwords
If you are setting up the system on a network with DHCP servers, DNS servers, and Dynamic DNS
services, you need:
• system serial number
• domain information

6
VNXe3100 Installation Guide
Space Cabinet vertical space 2U (3.5 inches, 8.9 cm) for the disk processor enclosure (DPE)
Cabinet vertical space for each optional DAE, 2U each
Tools Slotted or Phillips screwdriver
Management
Console
A Windows-based computer to run the initialization, maintenance, and management tools with:
• At least 100 MB of free space
• Connection on same LAN subnet as your VNXe system (recommended)
• Web browser* (Internet Explorer, Mozilla Firefox, Google Chrome)
•AdobeFlashPlayer*
*Supported versions are listed in the release notes.
Requirement Description

Install the disk processor enclosure (DPE)
7
Rack & Install
Install the disk processor enclosure (DPE)
Install the DPE rails
Install the DPE rails first, at the bottom of the space reserved for the VNXe system in your cabinet.
Any DAEs should be installed above the DPE.
1. Locate the 2U adjustable rail kit for the DPE, and identify the left rail (marked with an L on the
front), and the right rail (marked with an R on the front).
2. Insert the alignment pins at the end of the left rail into the rear channel of your cabinet.
3. Extend the adjustable rail so that it reaches the front channel of the cabinet and check the
alignment of the rail to ensure that the front of the rail is level with the back. Once you are
satisfied with the alignment, insert one screw from the front of the cabinet into the rail’s
bottom screw hole as shown in Figure 2.
4. Insert two retention screws through the back of the cabinet to secure the rail.
Figure 2 Installing the DPE rails
Front
Threaded
screw hole
Screws hold the
rails in place
Alignment pins
Threaded
screw holes
R
L
Detail
Right rear

8
VNXe3100 Installation Guide
5. Repeat steps 2-4 to attach the right DPE rail, making sure that the right rail is level with the left
rail.
6. Tighten the rail screws at both the front and back of the cabinet.
Install the disk processor enclosure
Two people are required to install the components. Do not attempt to lift and install the
enclosure into a rack without a mechanical lift or help from another person.
1. Locate the Product ID/SN from the product serial number tag (PSNT) located at the back of the
DPE. Record this number on the VNXe Series Configuration Worksheet to use when you
register the product during post installation steps.
Note: Do not remove the PSNT tag from the enclosure.
Figure 3 Location of the PSNT tag on the back of the DPE
2. Slide the DPE into the 2U DPE rails in the cabinet until the rear of the DPE is seated in the tabs
on the rails.
3. Insert four screws into the DPE (front) bracket screw holes and into the cabinet as shown in
Figure 4 on page 9. It may be easier to install the screws working in a diagonal pattern, such as
bottom left and top right, bottom right and top left.
VNXe-000780
PSNT

Install the disk processor enclosure (DPE)
9
4. When the DPE is in place, tighten all of the screws.
Figure 4 Installing the DPE
Disk-processor enclosure
4 screws hold the
component in the cabinet
(2 screws each side)
Front
Alignment pins
Front detail
Brackets are attached
to the components
VNXe-000779

10
VNXe3100 Installation Guide
Install Disk Array Enclosures (DAEs)
All DAEs are optional. Any DAEs should be installed immediately above the DPE.
Install the DAE rails
To install the DAE rails:
1. Locate the 2U adjustable rail kit for the DAE, and identify the left rail (marked with an L on the
front), and the right rail (marked with an R on the front).
2. Insert the alignment pins at the back of the left rail into the rear channel of your cabinet.
3. Extend the adjustable rail so that it reaches the front channel of the cabinet and check the
alignment of the rail to ensure that the front of the rail is level with the back. Once you are
satisfied with the alignment, insert one screw from the front of the cabinet into the rail’s
bottom threaded screw hole as shown in Figure 5.
4. Insert two retention screws from the back of the cabinet to attach the rail.
5. Repeat steps 2-4 to attach the right DAE rail, making sure that the right rail is level with the left
rail.
Figure 5 Installing the DAE rails
Front
Threaded
screw hole
Screws hold the
rails in place
Alignment pins
Threaded
screw holes
R
L
Detail
Right rear
Altri manuali per VNXe3100
3
Indice
Altri manuali EMC Sistema di array di dischi
Manuali Sistema di array di dischi popolari di altre marche

Fujitsu
Fujitsu ETERNUS DX60 S2 Manuale utente

Accom
Accom WSD/2XTREME Manuale utente

HP
HP Compaq Presario,Presario 4400 Istruzioni utente

ATTO Technology
ATTO Technology Diamond Storage Array V-Class Manuale utente

National Instruments
National Instruments RMX-8268 Manuale utente

Overland Tandberg
Overland Tandberg SnapServer DX1 Manuale utente












