Emerson Smart Wireless Gateway Manuale utente

Quick Start Guide

00825-0200-4420, Rev EA

April 2013

Smart Wireless Gateway

00825-0200-4420_EA.fm Page 1 Monday, April 1, 2013 1:17 PM

April 2013

Quick Start Guide

NOTICE

This installation guide provides basic guidelines for the Smart Wireless Gateway. It does not

provide instructions for diagnostics, maintenance, service, or troubleshooting. Refer to the

Smart Wireless Gateway Reference Manual (Document Number 00809-0200-4420) for more

information and instructions. The manual and this QIG are available electronically on

www.emersonprocess.com.

Explosions could result in death or serious injury:

Installation of this device in an explosive environment must be in accordance with the

appropriate local, national, and international standards, codes, and practices. Please review the

Product Certifications section for any restrictions associated with a safe installation.

Avoid contact with the leads and terminals. High voltage that may be present on leads can

cause electrical shock. This device complies with Part 15 of the FCC Rules. Operation is subject

to the following conditions. This device may not cause harmful interference. This device must

accept any interference received, including interference that may cause undesired operation.

This device must be installed to ensure a minimum antenna separation distance of 20 cm from

all persons.

00825-0200-4420_EA.fm Page 2 Monday, April 1, 2013 1:17 PM

Quick Start Guide

April 2013

Wireless considerations

Power up sequence

The Smart Wireless Gateway (Gateway) should be installed and functioning

properly before Power Modules are installed in any wireless field devices. Wireless

field devices should also be powered up in order of proximity from the Smart

Wireless Gateway beginning with the closest. This will result in a simpler and

faster network installation.

Antenna position

The antenna should be positioned vertically, and be approximately 3 ft. (1 m)

from large structures or buildings to allow for clear communication to other

devices.

Mounting height

For optimal wireless coverage, the Gateway or remote antenna is ideally mounted

15-25 ft. (4,6 - 7,6 m) above ground or 6 ft. (2 m) above obstructions or major

infrastructure.

Gateway redundancy

If the wireless Gateway was ordered with redundancy (Gateway Redundancy code

RD), please see appendix D in the reference manual (doc. # 00809-0200-4420) for

additional installation instructions.

General considerations

PC requirements

Operating System (optional software only)

Windows XP Professional, Service Pack 3

Windows Server 2003 Service Pack 2

Windows Server 2003 R2 Service Pack 2

Windows Server 2008 (Standard Edition), Service Pack 2

Windows Server 2008 R2 Standard Edition, Service Pack 1

Windows 7 Professional, Service Pack 1

Windows 7 Enterprise, Service Pack 1

Applications

Internet Explorer 6.0 or higher

Mozilla Firefox 1.5 or higher

.Net Framework 2.0 (for OPC proxy only)

Hard Disk Space

AMS™ Wireless Configurator: 1.5 GB

Gateway Setup CD: 250 MB

00825-0200-4420_EA.fm Page 3 Monday, April 1, 2013 1:17 PM

April 2013

Quick Start Guide

Step 1: Initial connection and configuration

DeltaV™ ready

If the Gateway was ordered DeltaV Ready (Data Protocols Code 5), then Step 1:

Initial Connection and Configuration is not required. Proceed to Step 2: Physical

Installation, and connect the Gateway to a DeltaV 10.3 or newer control network.

Initial connection and configuration

To configure the Smart Wireless Gateway, a local connection between a

PC/Laptop and the Gateway needs to be established.

Powering the gateway

Bench top power will be needed to power the Gateway by wiring a 24 VDC

(nominal) power source, with at least 250 mA, to the power terminals.

Figure 1. Gateway Terminal Block Diagram

Establishing a connection

Note

For information on how to connect with a Windows®7 PC, please see the technical note

(document number: 00840-0900-4420).

1. Connect the PC/Laptop to the Ethernet 1 (Primary) receptacle on the

Gateway.

24 VDC

(nominal)

Power Input

Serial

Modbus

Not

Case

(Covered)

Ethernet 2

with Power Ethernet 2 Ethernet 1

(Secondary) (Primary)

00825-0200-4420_EA.fm Page 4 Monday, April 1, 2013 1:17 PM

Quick Start Guide

April 2013

Step 1 continued...

Figure 2. Gateway PC/Laptop Connection Illustration

2. To establish the PC/Laptop settings begin with Start>Settings>Network

Connections.

a. Select Local Area Connection.

b. Right click to select Properties.

c. Select Internet Protocol (TCP/IP), then click the Properties button.

Do not connect to the Ethernet 2 with Power (Covered) port. This port supplies power and

could damage the PC/Laptop.

+ +

-A B S S

24V DC24V DC

PowerInputPowerInput ModbusModbus Not UsedNot Used NotUsedNot Used

Not UsedNot Used NotUsedNot Used

CaseCase

POEPOE P2P2 P1P1

Ethernet 1

Receptacle

PC/Laptop

00825-0200-4420_EA.fm Page 5 Monday, April 1, 2013 1:17 PM

April 2013

Quick Start Guide

Step 1 continued...

Note

If the PC/Laptop is from another network, record the current IP address and other settings so the

PC/Laptop can be returned to the original network after the Gateway has been configured.

d. Select the Use the following IP address button

e. Input 192.168.1.12 in the IP address block.

f. Input 255.255.255.0 in the Subnet Mask.

g. Select OK for both the Internet Protocol (TCP/IP) Properties window and the

Local Area Connection Properties window.

Note

Connecting to the Gateway's secondary Ethernet port will require different network settings.

Please see Table 1 for additional network settings.

3. Disable Proxies.

a. Open a standard web browser (Internet Explorer, Mozilla Firefox, or other).

b. Navigate Tools>Internet Options>Connections>LAN Settings

c. Uncheck the box under Proxy Server.

Table 1. Default IP Addresses

Gateway PC / Laptop

Ethernet 1 192.168.1.10 192.168.1.12

Ethernet 2 192.168.2.10 192.168.2.12

Ethernet 1 (DeltaV Ready) 10.5.255.254 10.5.255.200

Ethernet 2 (DeltaV Ready) 10.9.255.254 10.9.255.200

Table 2. Subnet Settings

Subnet Mask

Default 255.255.255.0

DeltaV 255.254.0.0

00825-0200-4420_EA.fm Page 6 Monday, April 1, 2013 1:17 PM

Quick Start Guide

April 2013

Step 1 continued...

Configure the Smart Wireless Gateway

To complete initial configuration for the gateway:

1. Access the default web page for the Gateway at https://192.168.1.10.

a. Log on as User: admin.

b. Type in password: default.

2. Navigate to Setup>Ethernet Protocol>Address to enter the Network Settings.

a. Configure a static IP Address or set for DHCP and enter a Hostname

b. Restart Application at Setup>Restart Apps.

3. Disconnect the power and Ethernet from the Gateway.

00825-0200-4420_EA.fm Page 7 Monday, April 1, 2013 1:17 PM

April 2013

Quick Start Guide

Step 1 continued...

00825-0200-4420_EA.fm Page 8 Monday, April 1, 2013 1:17 PM

Quick Start Guide

April 2013

Step 2: Physical installation

Pipe mount

Tools Needed:

2-in. (51 mm) mounting pipe or mast

Two 5/16-in. (7,9 mm) u-bolts supplied with Gateway

1/2-in. socket-head wrench

For installing the Gateway in a pipe mount:

1. Insert one u-bolt around the pipe, through the top mounting holes of the

Gateway enclosure, and through the washer plate.

2. Use a 1/2-in. socket-head wrench to fasten the nuts to the u-bolt.

3. Repeat for the second u-bolt and the lower mounting holes.

Best practice

If the Gateway was ordered with Output Code 2, run a secondary Ethernet Cable when installing

cable conduit from the Gateway to a convenient indoor location to simplify future configuration

changes.

00825-0200-4420_EA.fm Page 9 Monday, April 1, 2013 1:17 PM

April 2013

Quick Start Guide

Remote antenna (optional)

The remote antenna options provide flexibility for mounting the Gateway based

on wireless connectivity, lightning protection, and current work practices.

When installing remote mount antennas for the Smart Wireless Gateway, always use established

safety procedures to avoid falling or contact with high-power electrical lines.

Install remote antenna components for the Smart Wireless Gateway in compliance with local

and national electrical codes and use best practices for lightning protection.

Before installing, consult with the local area electrical inspector, electrical officer, and work area

supervisor.

The Smart Wireless Gateway remote antenna option is specifically engineered to provide

installation flexibility while optimizing wireless performance and local spectrum approvals. To

maintain wireless performance and avoid non-compliance with spectrum regulations, do not

change the length of cable or the antenna type.

If the supplied remote mount antenna kit is not installed per these instructions, Emerson Process

Management is not responsible for wireless performance or non-compliance with spectrum regulations.

00825-0200-4420_EA.fm Page 10 Monday, April 1, 2013 1:17 PM

Altri manuali per Smart Wireless Gateway

Indice

Altri manuali Emerson Portale

Emerson

Emerson 1410 D Manuale utente

Emerson

Emerson Smart Wireless Gateway 1420 Manuale utente

Emerson

Emerson Smart Wireless Gateway 1410 Manuale utente

Emerson

Emerson 814-3550 Manuale utente

Emerson

Emerson CH Breaker Gateway Manuale utente

Emerson

Emerson Smart Wireless Gateway 1420 Manuale di istruzioni

Emerson

Emerson Smart Wireless Gateway Manuale utente

Emerson

Emerson Smart Wireless Gateway 1420 Manuale utente

Emerson

Emerson ATCA-8310 Manuale utente

Emerson

Emerson 1410S Manuale utente

Emerson

Emerson 1410H Manuale utente

Emerson

Emerson Smart Wireless Gateway 1410 Manuale utente

Emerson

Emerson 1410S Manuale utente

Emerson

Emerson 1410 A/B Manuale utente

Emerson

Emerson Smart Wireless Gateway 1420 Manuale utente

Emerson

Emerson 1552WU Manuale utente

Emerson

Emerson Smart Wireless Gateway 1420 Manuale utente

Emerson

Emerson Smart Wireless Gateway 1420 Manuale utente

Emerson

Emerson Smart Wireless Gateway 1410 Manuale utente

Emerson

Emerson PACSystems RX3i Manuale utente

Emerson

Emerson Smart Wireless Gateway Manuale utente

Emerson

Emerson Copeland PerformanceAlert Manuale utente

Emerson

Emerson 1410S Manuale utente

Emerson

Emerson 1410S Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente