Emerson ER108002 Manuale utente
OWNER'S MANUAL
ER108002
Visit our web site at www.emersonradio.com
UNAUTHORIZED MODIFICATIONS TO THIS DEVICE
COULD VOID MANUFACTURER'S WARRANTY
1080P HD Wireless Security
Camera with Pan/ Tilt/ Zoom
and Temperature Sensor
1. Packing List
Camera
USB Power
Adapter
2 Screws and
2 Anchors
Owne r'S Man ual
ER10 8002
UNAUTHORIZED MODIFICATIONS TO THIS DEVICE
COULD VOID MANUFACTURES'S WARRANTY
1080 P HD Wirel ess Sec urity
Came ra with P an/ Til t/ Zoom
and Tem perat ure sen sor
Temperature Sensor
SET Button
2. Device Overview
USB Cable
Owner’s
Manual
Light Sensor
Camera Lens
Microphone
Antenna
Micro SD Card Slot
Indicator Light
Power Port
Please refer to the chart below for information about the
camera's indicator light:
3. Create and Login to Your Account
3.1 Download and Install the app from the App Store
or Google Play Store.
1. Open the App Store(for iPhone and iPad)or Google Play
Store(for Android device)
2. Search"Emerson Home Cam" App and install
Note: Compatible with IOS 9.0 or above (for iPhone
and iPad) or Android 4.2 or above (for Android
device).
Please refer to the operating system requirements as
specified on the App Store or Google Play Store
TM
TM TM
3.2 Create Your Account and Login
1. Tap the “Emerson Home” icon to open the app.
2. Tap “Register” and follow the in-app instructions to
create your account (Valid e-mail address in required).
3. If you didn’t receive e-mail for the verification code,
please check your junk mail folder or tap “Get code”
again.
4. Login to your account. Select “Remember password”
if necessary.
If you are having trouble please contact our
Customer Support at 1.800.898.9020
Note: To protect your privacy, the camera is designed
for 1 account only. If you want to share the camera
access with your family or friends, you may (1) register
with the e-mail and password that can be shared; or (2)
share your paired camera to the others while their
permission levels are lower (Please refer to Section 5
on page 10 for details).
4. Camera Setup
Before starting the setup process, please make sure your
phone is connected to the same 2.4GHz Wifi network that
you will be connecting your camera to.
Option 1: Add by Scanning the QR Code on the Camera.
1. Tap “Add Device”→Tap Scan QR Code on Camera
“ ”.
2. The Wifi network shown should be the same as the
network that your phone is connected to. If this is not
your desired network, tap “tap here to search” to search.
Enter your Wifi password then tap “Confirm”.
Ensure y ou r mobile phone is c on nected to the Wif i
networ k th at you will be conn ec ting your camer a.
To use different W if i network,
Note: The came ra d oes not support 5 G Wi Fi.
tap here to s earch.
Ensure y ou r mobile phone is c on nected to the Wif i
networ k th at you will be conn ec ting your camer a.
To use different W if i network,
Note: The came ra d oes not support 5 G Wi Fi.
tap here to s earch.
●●●●●●●●
3. Press and hold the
seconds and then you will hear a beep.
“SET” key on your camera for 1-2
4. Tap the QR code icon to scan QR code on bottom of
camera. Change the device name if necessary and then
tap“Next”.
5. When your phone shows a QR code, place QR code
4-8 inches (10-20cm) away from camera to scan. When
you hear a beep sound, select “Sound Confirmed” .
4-8 inches
6. Connection may take about 5 30 seconds. The status
indicator light will turn to solid and steady green if the
camera is connected to the network.
-
The camera is now
ready to view
7. Tap the device to enter the real
-time monitoring interface.
Option 2: Add by Wifi
1.
2. The Wifi network shown should be the same as the
network that your phone is connected to. If this is not
your desired network,tap “tap here to search”. Enter your
Wifi password then tap “Confirm”.
Tap “Add Device”→Tap “Add by Wifi”.
3. Press and hold the
seconds and then you will hear a beep.
“SET” key on your camera for 1-2
4. Tap the QR code icon to scan QR code on bottom of
camera. Change the device name if necessary and then
tap“Next”.
Indice
Altri manuali Emerson Telecamera di sicurezza
