Eminent Ewent EW7031 Manuale utente

2 |

ENGLISH

EW7031/EW7032 - 2,5” SATA/eSATA Hard

Disk Enclosure

Warnings and points of attention

Opening of the product and/or products can lead to severe injuries! Repairing of the

product should be done by qualified Ewent staff.

Table of contents

1.0 Introduction ...........................................................................................................2

1.1 Functions and features......................................................................................2

1.2 Package contents..............................................................................................3

2.0 Installing a hard disk..............................................................................................3

3.0 Connecting by USB cable......................................................................................4

4.0 Connecting by eSATA cable (EW7032).................................................................4

5.0 Preparing your hard disk for usage........................................................................4

5.1 Windows 2000/ XP/Vista/7/8..............................................................................5

5.2 Mac OS X..........................................................................................................5

6.0 Using the EW7031/EW7032..................................................................................6

6.1 Windows 2000/XP/Vista/7/8...............................................................................6

6.2 Mac OS X..........................................................................................................6

7.0 Installing and using the backup software ...............................................................6

7.1 Installation of the OTB software.........................................................................6

7.2 Using the OTB software.....................................................................................7

8.0 Service and support...............................................................................................7

9.0 Warranty conditions...............................................................................................7

10.0 Declaration of Conformity....................................................................................8

1.0 Introduction

Congratulations with the purchase of this high-quality Ewent product! This product

has undergone extensive testing by Ewent’s technical experts. Should you

experience any problems with this product, you are covered by a five-year Ewent

warranty. Please keep this manual and the receipt in a safe place.

1.1 Functions and features

The EW7031 2,5” SATA Hard Disk Enclosure and the EW7032 2,5” eSATA Hard Disk

Enclosure enables you make backups or copy data at high speeds. The solid housing

offers an excellent protection for your data. Because of the USB 2.0 connection you

immediately profit from faster transfer speeds. The eSATA connector (EW7032)

provides you with a maximum transfer rate of up to 3Gbps. Your hard disk can easily

be mounted in to the housing, enabling you to use it anytime, anywhere.

3 |

ENGLISH

1.2 Package contents

The following parts need to be present in the packaging:

•EW7031/EW7032 2,5” SATA Hard Disk Enclosure.

•USB connection cable, double USB A plug.

•eSata cable. (EW7032)

•USB power cable. (EW7032)

•

Three Screws. (One spare)

•Manual.

•Installation CD-ROM.

•Screw driver.

•Protective bag.

2.0 Installing a hard disk

This chapter explains how to connect and install the EW7031/EW7032.

Note! We recommend you to make a backup of the data on the hard disk you wish to

use. Ewent can not be held responsible for any loss of or damage to data resulting in

the use of this device or software.

Follow these steps to install a hard disk:

1. Pull out the back panel of the enclosure.

2. Connect the SATA plug on the front panel to the hard disk.

3. Slide the hard disk into the enclosure.

4. Use the small screws to fasten the back panel to the enclosure.

4 |

ENGLISH

3.0 Connecting by USB cable

You can connect both EW7031 and EW7032 to your computer using the USB

connection cable. If you want to connect your EW7032 using the eSATA cable you do

not need to use the USB connection cable and you can go to the next chapter.

1. Turn off your computer.

2. Connect the double USB type A plug to two free USB ports on your computer.

3. Connect the USB connection cable to the housing. (2)

4. Turn on your computer. Windows will automatically recognize the housing.

4.0 Connecting by eSATA cable (EW7032)

Follow these instructions to connect your EW7032 to your computer using the eSATA

cable. You do not need to use the USB connection cable.

1. Turn off your computer.

2. Connect the eSATA cable to the eSATA port on your computer.

3. Connect the eSATA cable to the housing. (3)

4. Connect the USB power cable to the housing. (4)

5. Turn on your computer. If all is well, Windows will automatically recognize the

housing.

5.0 Preparing your hard disk for usage

Note! The steps below are only necessary if you use a new hard disk.

5 |

ENGLISH

5.1 Windows 2000/ XP/Vista/7/8

1. Right click the ‘My Computer’ icon.

2. Click ‘Manage’.

3. Select the option ‘Disk Management’ from the left side of the screen.

4. Right click the new hard disk.

5. Select ‘Initialize’.

6. Click ‘Ok’.

7. Right click the new hard disk.

8. Click ‘New Partition’.

9. Click ‘Next’.

10. Click ‘Next’.

11. Click ‘Next’.

12. Choose the desired partition size (Note: when using FAT32 the partition size is

limited to 32GB).

13. Click ‘Next’.

14. Select the drive letter you wish to assign to this partition (this is not required).

15. Click ‘Next’.

16. Select the desired file system: FAT32 or NTFS. If you will only use the hard disk

for Windows XP or Vista systems we recommend you to select the NTFS file

system.

17. Enter a name for the new partition in the field 'Volume label'.

18. Check ‘Quick format’ and click ‘Next’.

19. Click ‘Next’.

20. Click ‘Finish’.

5.2 Mac OS X

1. Open Finder in your Dock by clicking it.

2. Click ‘Applications’ in the left menu of the Finder.

3. Click the ‘Utilities’ folder in the right part of the Finder.

4. Click the ‘Disk Utility’ icon in the right part of the Finder.

5. Select the new USB disk in the left list of the Disk Utility.

6. Click the ‘Partition’ tab in the right part of the Disk Utility.

7. Select ‘1 partition’ as the partitioning scheme.

Note: If you will only use the hard disk for Mac OS systems, we recommend you to

choose ‘Mac OS X Extended’ as the file system. If you need to use the disk on both

Mac and Windows systems, you can choose the ‘FAT32’ file system.

8. Click the ‘Partition’ button to partition the disk.

9. After several minutes, the partitioning should be completed.

10. Your EW7031/EW7032 is now ready for use.

6 |

ENGLISH

6.0 Using the EW7031/EW7032

This chapter explains how to start using the EW7031/EW7032 in combination with

several operating systems.

6.1 Windows 2000/XP/Vista/7/8

Normally you should be able to plug in your EW7031/EW7032 when the computer is

switched on. After you connect the EW7031/EW7032, Windows will automatically find

and install the drivers and all partitions will be available through ‘My Computer’ or

through Windows Explorer.

Note: Make sure you must safely remove the EW7031/EW7032 from your computer.

Click ‘Safely remove hardware’ icon on the taskbar and you will see al list of

devices. Click the device you want to remove.

6.2 Mac OS X

Normally you should be able to plug in your EW7031/EW7032 when the Mac is

switched on. After you connect the EW7031/EW7032, OS X will automatically find and

install the drivers. The extra partitions will be available through the new icon on the

desktop.

7.0 Installing and using the backup software

The EW7031/EW7032 is equipped with a so-called One-Touch-Backup function. This

function allows you to make a backup or copy of selected files by the touch of a

button. You yourself can determine which files need to be copied, using the OTB

software.

7.1 Installation of the OTB software

1. Insert the supplied CD-ROM into the CD-ROM or DVD-ROM drive of your

computer.

2. The CD-ROM will start automatically.

3. Select the preferred language and click ‘Next’.

4. Select ‘Install Software’ and click ‘Next’.

5. Choose ‘English’ and click ‘Next’.

6. Click ‘Next’.

7. Click ‘Install’.

8. The software will now be installed.

9. Click ‘Finish’.

10. Click ‘Close’ and then ‘Yes’ to leave the install menu.

11. The software has now been installed.

7 |

ENGLISH

7.2 Using the OTB software

1. Click ‘Start’.

2. Click ‘Programs’ or ‘All Programs’.

3. Click ‘OTB_util’.

4. Right click ‘OTB_util’ and click “Run as Administrator”. The software will now be

started.

5. In the upper menu you can choose from which location you wish to copy the files,

also called ‘Copy From’.

6. In the lower menu you can choose where to copy the files to, also called ‘Copy

To’.

7. Press the ‘BACKUP’ button on the back of the housing once. The software or

files which you selected will now be copied to the hard disk in the housing.

8.0 Service and support

This users manual has been carefully written by Ewent’s technical experts. If you have

problems installing or using the product, please fill out the support form at the website

www.ewent-online.com/. You can also contact us by phone. Below you will find a list

with phone numbers for each supported country.

Country

Phone number

Rate per minute*

Belgium (Dutch) 070 277 286 €0.30

Belgium (French) 070 277 286 €0.30

Denmark +45 69918565 Local Costs

Finland +35 8942415826 Local Costs

Germany 1805 982 234 €0.14

Italy +39 0240042016 Local Costs

Norway +47 21075033 Local Costs

Spain 807 080 042 €0.41

Sweden +46 840 309985 Local Costs

The Netherlands 0900-3646368 €0.45

UK 905 871 0013 Local Costs

* Rates mentioned in this table do not include cell phone charges.

9.0 Warranty conditions

The five-year Ewent warranty applies to all Ewent products unless mentioned

otherwise before or during the moment of purchase. When having bought a second-

hand Ewent product the remaining period of warranty is measured from the moment

of purchase by the product’s first owner. The Ewent warranty applies to all Ewent

products and parts inextricably connected to and/or mounted on the main product.

Power supply adapters, batteries, antennas and all other products not integrated in or

directly connected to the main product and/or products of which, without reasonable

doubt, can be assumed that wear and tear show a different pattern than the main

product are not covered by the Ewent warranty. Products are not covered by the

8 |

ENGLISH

Ewent warranty when subjected to incorrect/improper use, external influences and/or

when opened by parties other than Ewent.

10.0 Declaration of Conformity

To ensure your safety and compliance of the product with the directives and laws

created by the European Commission you can obtain a copy of the Declaration of

Conformity concerning your product by sending an e-mail message to: info@ewent-

online.com. You can also send a letter to:

Ewent Computer Supplies

P.O. Box 276

6160 AG Geleen

The Netherlands

Clearly state ‘Declaration of Conformity’ and the article code of the product of which

you would like to obtain a copy of the Declaration of Conformity.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Eminent Allegato

Eminent

Eminent ewent EW7033 Manuale utente

Manuali Allegato popolari di altre marche

SilentiumPC

SilentiumPC Armis AR5 Manuale

Pulsar

Pulsar 17/TRP80/DSPR Manuale utente

Thermaltake

Thermaltake V150 TG Manuale utente

MSI

MSI MPG SEKIRA 500X Manuale utente

Antec

Antec Dark fleet DF-10 Manuale utente

Nexans

Nexans WTC05 Manuale utente

Peavey

Peavey DS 1502 Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuale utente

Rosewill

Rosewill RX82-U(JBOD) Manuale utente

QNAP

QNAP SAS JBOD CLI 1.0 Manuale utente

GAMDIAS

GAMDIAS Talos P1 Manuale utente

Auvs

Auvs KR615 Manuale utente

Digitus

Digitus DA-71114 Manuale utente

CommScope

CommScope FDH 3000 Manuale utente

FS FHD-FWME4 Manuale utente

JBL

JBL CS1215T Manuale utente

Pulsar

Pulsar ARAD-S4 Manuale utente

Pulsar

Pulsar AWO454 Manuale utente

Eminent ewent EW7031 Manuale utente

Manuali Allegato popolari di altre marche