EMOJO BOBCAT PRO Manuale utente
OWNER’S MANUAL
Instructions
Warnings
Explanatory diagram of the overall ebike configuration
Schematic diagram of the electric bicycle
Main technical parameters
Throttle control
Correct operation stages
Pedal assist mode control
Error codes
Charging the battery
Seat adjustment
Disc brakes
Tire pressure and brake adjusment
Chain adjustmen and Hall sensor
Maintenance table
Power shut off troubleshooting
Folding mechanism
Front suspension and handlebar adjustment
FAQ
Storage and disposal
Contact us
1
2
3
4
5
6
7
10
11,12
16
17
18
19
15
13
14
20
21
22
23
8,9
CONTENTS
1
Instructions
1.
Please read the manual carefully before using your EMOJO electric bic ycle.
2.
Make sure all parts are locked tightly, such as the frame joint, handlebar, seat post and pedal, etc. Before using. Do
not use the electric bicycle before carefully reading the instructions and knowing about the performance of the electric bicycle.
Do not lend the electric bicycle to anyone who does not know how to operate it.
3.
Develop a habit of charging when the power of the battery pack shows a red light. Please charge and maintain the battery
pack consistently to have longer service; if the bicycle is not to be used for a long period, it is suggested to turn power of the
battery pack to the OFF position and charge-discharge the battery once per month.
4.
Frequent braking, starting, uphill, still starting, muddy and uneven ground, overloading of people and goods will assume larger
electricity, thus influencing the travel mileage. If you want to get the best travel mileage, we suggest you follow the following
instructions:
Ride the bicycle to a certain speed by pedaling prior to turning on pedal-assist or throttle power.
Try to decrease the frequency of braking and starting while maintaining safe riding habits.
Please assist with pedal when the slope angle is steep, or the wind speed is fast.
5.
When you lift the battery, please do not insert any metal objects (such as wires, keys, etc) into the charging socket or bridge the
negative and positive poles of the battery cell. This can cause battery short-circuit, resulting in a fire and putting your safety at risk.
6.
This e-bike is not intended to be ridden through water. When the water level inundates the controller, electrical circuitry or
motor hub, it is possible that it will cause short circuit and damage the circuit, please pay attention to avoid burning down the
electronic control system!
7.
The standard load weight of this bike is 300 lbs. (including the cyclist), overloading may cause the travel mileage to decrease,
or cause the spare parts of the bike damage and reduce working life of battery.
8.
Warranty will be void if a non-approved battery charger or other non-original EMOJO spare parts are used.
9.
M
inors,
p
regnant women or anyone that does not have
f
ull de
x
terity o
f
hands and legs should not use this product.
10.
P
lease check the tightening state o
f
f
ront a
x
le, bottom bracket shell, rear a
x
le, etc.
f
re
q
uently in use.
11.
C
hildren younger than
16
should not ride the electric bicycle.
2
Warnings
Please pay attention to the following items for your safety:
Battery warnings
Battery warnings
Disassembling and refitting the bicycle may bring hidden safety hazards
to your electric bike, therefore, causing risk.
Do not keep, approach or store the battery near high heat sources.
Avoid areas near flammable or explosive liquids or gas.
Do not tamper or disassemble the charger. Avoid dropping or
smashing it violently.
Charge your battery in a well ventilated area, free of humidity and far
from flammable or explosive objects.
While charging, there should be no foreign objects on the charger or
the battery shell.
Avoid contact between teh conductive objects and the battery poles
at the same time to avoid short-circuit and damaging the battery.
Always keep your hands dry while plugging and unplugging the power
plug and when handling the battery.
The battery is not a toy, do keep children away.
Do not disassemble the battery case, do not attempt to make any
modifications or external connections. You will lose your warranty. Do not drop the battery, do not immerse in water and keep it away from
high-humidity areas.
Do not attempt to short-circuit the battery electrodes, which can
damage the battery, the bicycle controller and the charger.
Makesure to check the set up and stability of the brakes, saddle,
frame, handlebar, wheels , etc. before riding to make sure all is in
proper working condition.
Avoid riding through sharp objects like stairs or rocks
which can damage the tires and wheels.
Do not attach any objects to the handlebar that may obstruct your
vision or handling.
This bicycle is for a single rider, not intended to carry any passengers.
Always wear a helmet.
Downhill speed should be moderate, please do not apply the front
brake fully when slamming the brakes at high speed to avoid the front
wheel from locking and losing control.
The brakes should not be oiled to avoid causing iffy braking and
endangering your personal safety.
Wear appropriate protecting apparel when riding under the rain.
Never use an umbrella and/or operate the bicycle with one hand.
Explanatory diagram of the overall ebike configuration
Actual product may slightly differ from this picture
Seat
Passenger
seat
Transmission chain
Front
suspension
Seat post
Seat post quick release
lever
3
QQuick connectors
Rear disc
brake
Front disc brake
Pedal
Front cargo
basket. 30Lbs.
payload
Handlebar
angle
andjadjustment
mechanism
Front fender
Front lights
Rear fender
Tail light
Front brake caliper
Electric motor
Motor quick connector
Mechanical
gears shifter
Battery
Folding hinge
Folding
release lever/
lock
3
Schematic diagram of the electric bicycle
4
48V
4
Main technical parameters
Index
58Lbs
300Lbs
Winter:60 miles
I
Summer: 65miles
Item
Total bicycle weight in lbs.
Max. load (including cyclist, passenger and cargo
Travel Mileage on a single Charge Miles w/PAS
Power Consumption on a single Charge ( P(kilowatt)
Power Consumption per Kilometer (kilowatt(
Battery TType
Voltage / Capacity
Motor TType
Motor Rated output power
Rated voltage
Uunder-voltage
Protection
Charger
<0<0.6 .6
<<1.22
Lithium Ion Battery
48 Volts, 15 amps
PPermanent Magnet DC Hi-Speed Motor 500W
30.5V±0.5V/41.5 V±0.5V
48 V
30.5V
15A+/-
5
5
48 v 2A
4 to 5 hours (instant charge after 2 hours)
AC 110-220V
48 V
2 A
Controller
Over-current Protection Model
Durati on of Charge
Main Appliance Input Voltage
Main Appliance Output voltage
Charging Current
Hand Throttle Control
Your electric bike is equipped with a power and throttle control on the
right hand side. To power on your bike first make sure to turn on your bike
by pressing and holding the M button on the left side.
You control the throttle by pushing with your thumb the paddle, the farther
you push from its resting position, the more power is delivered to the
motor to accelerate. When you want to slow down, you simply release the
throttle and let it return to its resting position and simultaneously apply the
brakes.
When the pedal assist mode is set to "0", the pedal assist and throttle function(s) do not engage. When the pedal assist mode is set to "5" the
pedal assist function will engage to the maximum speed level and the throttle will accelerate the bike forward. The throttle control is operated
on the right hand side.
When you want to slow down, you simply release the throttle and let it return to its resting position and simultaneously apply the brakes.
Thumb Throttle
6
Mechanical gears
This EMOJO electric bike is equipped with 7 mechanical gears in addition to the pedal assist levels. The first gear is for eas ier and uphill pedaling,
the last gear is for maximum speed on leveled ground or downhills. Change gears only when pedaling. The rear wheel c ontains seven chain
sprockets. When the chain is around the largest sprocket, you are in the 1st gear which is the "lowest" gear. The high gear wi ll have the dérailleur
positioned so that the chain is directed around the smallest gear selector and cause it to change gear. Adjustments require fine tunning and should
be made by a qualified technician.
Avoid changing gears rapidly from 1st to the 7th gear or vice-versa. If you change multiple gears too quickly, you could have the chain come off the
front sprocket.
Thumb shifter up
7-gears cassette
Thumb shifter down
Derrailleur
6
Correct operation stages
!
Warning:
!
"For your safety, please practice in a closed track the first time you ride your ebike". After mastering the controls of an electric bicycle, you may
ride on regular roads and follow the traffic rules consciously. Do not let inexperienced people ride the electric bicycle, do not disassemble and refit
the electric bicycle. please pay attention and brake in advance to allow longer braking distance in rainy or snowy weather.
Start: Press and hold the M button on the left handlebar
controls.
Motor On/Pedal Assist
Start pedaling and the electric bicycle will drive forward normally. If you stop pedaling,
the electric motor will stop working, but it will still drive forward a short distance because
of inertia.
You can adjust the level of electric assistance by toggling the up and down arrows.
There are 5 levels of electrical assistance, level 5 being the highest.
Throttle only
You can use the thumb throttle only and the bicycle will move without you having to pedal. Click the M button on the handlebar control to turn
on the system, with your right thumb press down the throttle, the further you push the throttle the faster it accelerates. To stop or reduce the
speed release the throttle and apply the brakes the electric motor will stop working, but it will still drive forward a short distance because of
inertia.
Note: A: For your safety concern, please hold the grip tightly
with both hands while riding, and please brake in a timely manner when necessary.
B: This bicycle has the function of brake power cut. The brakes will cut off the motor power to ensure safety of riding. Always check your brakes
and cables before riding.
7
Pull to brake. Brake sensor will shut off motor power.
Pedal Assist Mode Control
Please read the following steps and images to help
you understand how to read and operate all the
functions.
8
◆Display Interface
After switching on the ebike system, the display shows current speed and total
distance except, battery indicator and assistance level
◆To change the indicated information, press the MODE button to show in turn as
follows: Current Speed (Km/h) → Trip Distance (Km) Trip Time (Hour) → Max.
Speed (Km/h) → Avg. Speed (Km/h) → Motor-output (W) →Current Speed
(Km/h).
◆Switching PAS Off: There is a preset setting which allows your bike to cruise at
a steady speed of 3.7 MPH (6Km/h), the letter "P" is shown at the screen. To
engage this cruise control feature press and hold the "-" button for a few
seconds until the letter "P" shows on the screen. To disengage this function
press the brakes.
Press the power button (M button) on the handlebar controls
located near the left grip to tum it on.
You can adjust the pedal assist power level to have more power
by hitting the [ +] button (right button) and can move to a lower
level power by hitting the [-] button (left button).
When not riding your bike, you can tum off the meter by holding
down the power button (M button) for several seconds.
◆Manual Clearance Function
Among of all functions, Trip Distance, Trip Time, Max.
Speed and Avg. Speed, can only be cleared manually.
If the above functions need to be cleared, After switching
on the E-bike system and parking the E-bike, please to hold
the MODE button and the DOWN button for 2 s, the above
functions can be cleared at the same time.
Indice
Altri manuali EMOJO Bicicletta
