EMPHASER EA1250 Istruzioni per l'installazione

INSTALLATION & OPERATING MANUAL

EINBAU- & BEDIENUNGSANLEITUNG

MONO, 2-& 4-CHANNEL AMPLIFIERS

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 1

CONTENTS

1. DESIGN FEATURES 5

2. CONNECTIONS & CONTROLS 6-11

2.1 FRONT PANEL CONNECTION & CONTROLS 6-11

2.2 REAR PANEL CONNECTIONS 6-11

2.3 SPEAKER IMPEDANCES & WIRE INFO 12

3. AMPLIFIER MOUNTING 12

4. WIRE ROUTING 13

4.1 MAIN POWER WIRES 13

4.1 RCA & REMOTE WIRES 13

4.3 LOUDSPEAKER WIRES 13

5. CROSSOVER ADJUSTMENTS 14

5.1 SELECTING THE OPERATION MODE 14

5.2 HIGHPASS CROSSOVER FREQUENCY ADJUSTMENT 14

5.3 LOWPASS CROSSOVER FREQUENCY ADJUSTMENT 14

5.4 SUBSONIC HIGHPASS CROSSOVER ADJUSTMENT 15

5.5 INPUT LEVEL ADJUSTMENT 15

6. TECHNICAL SPECIFICATIONS 29-30

7. EMPHASER LIMITED WARRANTY 31

7.1 WARRANTY LIMITATIONS 31

8. WARRANTY CARD 32

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 2

INHALT

1. TECHNISCHER AUFBAU / MERKMALE 17

2. ANSCHLÜSSE & BEDIENUNGSELEMENTE 18-23

2.1. EINGÄNGE & FUNKTIONEN AM FRONT PANEL 18-23

2.2 EINGÄNGE AM REAR PANEL 18-23

2.3 LAUTSPRECHER-IMPEDANZ & KABELINFO 24

3. MONTAGE DES VERSTÄRKERS 25

4. VERKABELUNG / ELEKTRISCHER ANSCHLUSS 25

4.1 HAUPT-STROMKABEL 25

4.2 CINCH- & REMOTE KABEL 26

4.3 LAUTSPRECHERKABEL 26

5. EINSTELLUNG DER FREQUENZWEICHE 26

5.1 WAHL DES OPERATIONS-MODUS 26

5.2 HOCHPASS TRENNFREQUENZ EINSTELLUNG 27

5.3 TIEFPASS TRENNFREQUENZ EINSTELLUNG 27

5.4 SUBSONIC HOCHPASS TRENNFREQUENZ EINSTELLUNG 27

5.5 ANPASSUNG DER EINGANGSEMPFINDLICHKEIT 28

6. TECHNISCHE SPEZIFIKATIONEN 29-30

7. EMPHASER GARANTIE-BESTIMMUNGEN 31

7.1 GARANTIE-EINSCHRÄNKUNGEN 31

8. GARANTIEKARTE 32

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 3

Congratulations!

And thank you for choosing this EMPHASER car audio amplifier!

To maximize the performance of this amplifier and your car audio system install, we recommend that

you acquaint yourself thoroughly with all capabilities and features of this EMPHASER amplifier unit.

Please read this manual carefully, before attempting the installation of this amplifier. Please retain this

manual and your purchasing / installation receipts for future reference.

IMPORTANT NOTICE:

In case you are installing your EMPHASER amplifier yourself, you should have

your installation checked and approved by an authorized professional

EMPHASER dealer/installer, in order to qualify for full warranty protection and

also, to reach maximum power- and audio performance possible with your

individual car audio system.

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 4

1. DESIGN FEATURES

■CAR AUDIO AMPLIFIER: This EMPHASER amplifier allows the crossover controlled amplifica-

tion of satellite speaker systems, kickwoofer or subwoofer systems

■DASH-MOUNT REMOTE LOWPASS LEVEL CONTROL: A compact „Lowpass-Level“ remote

control unit can be mounted close to the drivers seat. This control device allows the convenient level

adjustment of the bass volume (not applicable for EA470)

■FULL-MOSFET CIRCUITRY: This EMPHASER amplifier line features a full MOS-FET circuitry lay-

out, implementing MOS-FET’s for power supply and output stages, to guarantee excellent sonic per-

formance and very high power output

■2 / 1 / 0.5 OHM LOAD STABILITY: This EMPHASER amplifier line up features models that

work stable and reliable into very low impedance loads. Due to the high damping factor, every model

of this amplifier line will guarantee full control over the connected speaker system(s)

■INTEGRATED ELECTRONIC CROSSOVER: The internal crossover section features independ-

ently selectable highpass or bandpass filtering, as well as fulllrange loop through. All x-overs feature

crossover slope rates of 18 dB/octave

■UNCOMPROMISING DESIGN AND CONSTRUCTION: Only best electrical and electronic

components have been used for the assembly of this amplifier line. Such as double-sided glass-fiber

epoxy circuit boards equipped with high current TR output devices. The power input side features mol-

ded direct power input terminals for full unrestricted current flow

■ADVANCED PROTECTION CIRCUITRY: The protection circuitry safe-guards the amplifier from

short-circuits at the speaker outputs, DC offset voltage at the outputs and overheating of power elec-

tronics

■STATUS AND PROTECTION LED’S: A green and a red LED located at the side panel enable

you to monitor the operating status of your EMPHASER amp

■ADJUSTABLE INPUT SENSITIVITY: Each RCA line-input pair accepts input voltages from

300mV to 7V, providing a good match to the line-output levels of almost any head-unit on the market

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 5

2.1 FRONT PANEL CONNECTIONS & CONTROLS

EA1250 MONO-AMPLIFIER

1+2 RCA INPUTS

Low-level stereo RCA signal input for connection with head-unit.

3INPUT GAIN CONTROL

Input level control - allowing to match the output voltage of the head-unit's RCA line-outs to

the amplifier input section.

4SUBSONIC

Control for the frequency adjustment of the 18dB/oct. subsonic crossover. The subsonic

filter is only active, when the operation mode is set to bandpass BPF.

5OPERATION MODE SWITCH

Switch to select the operation mode of the active crossover of the amplifier.

6LOW PASS FREQUENCY CONTROL

Control for the frequency adjustment of the 12dB/oct. low-pass crossover of the speakers

connected to the output terminals.

7REMOTE LOW PASS LEVEL INPUT

Telephone jack input socket for connection with the dash-mounted low-pass level remote unit.

The remote low pass level control is only active when the operation mode switch is set to

bandpass!

8POWER LED

Green "operation" LED, signaling correct operation of the amplifier.

9PROTECTION LED

Red "protection" LED, signaling faulty speaker connections or general malfunction of the

amplifier.

FRONT PANEL

EA1250 12

38 4 5 6 7 9

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 6

2.2 REAR PANEL CONNECTIONS

REAR PANEL

EA1250

EA1250 MONO-AMPLIFIER

10 SPEAKER OUTPUT TERMINALS MONO

Output terminal to connect the speakers to the amplifier.

11 POWER INPUT TERMINAL "GND"

Terminal to connect the amplifier to the negative or ground pole of the car battery.

12 REMOTE INPUT TERMINAL "REM"

Terminal to connect the amplifier to the automatic (remote) turn-on / turn-off lead of

the head unit.

13 POWER INPUT TERMINAL "+12 V"

Terminal to connect the amplifier to the positive +12V pole of the car battery.

10 12 13

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 7

2.1 FRONT PANEL CONNECTIONS & CONTROLS

EA275HCCA, EA2200 2-CHANNEL AMPLIFIERS

1+2 RCA INPUTS 1/2-CH

Low-level stereo RCA signal input for connection with head-unit.

3INPUT GAIN CONTROL 1/2-CH

Input level control - allowing to match the output voltage of the head-unit's RCA line-outs

to the amplifier input section.

4HIGH PASS FREQUENCY CONTROL 1/2-CH

Control for the frequency adjustment of the 18dB/oct. high-pass filtering of the speakers

connected to the output terminals.

5OPERATION MODE SWITCH 1/2-CH

Switch to select the operation mode of the active crossover of the amplifier.

6LOW PASS FREQUENCY CONTROL 1/2-CH

Control for the frequency adjustment of the 18dB/oct. low-pass filtering of the speakers

connected to the output terminals.

7REMOTE LOW PASS LEVEL INPUT

Telephone jack input socket for connection with the dash-mounted low-pass level remote unit.

The remote low pass level control is only active when the operation mode switch is set to

bandpass!

8POWER LED

Green "operation" LED, signaling correct operation of the amplifier.

9PROTECTION LED

Red "protection" LED, signaling faulty speaker connections or general malfunction of the

amplifier.

FRONT PANELS

EA275HCCA

EA2200 12

38 4 5 6 7 9

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 8

2.2 REAR PANEL CONNECTIONS

REAR PANELS

EA275HCCA

EA2200 1110 12 13

EA275HCCA, EA2200 2-CHANNEL AMPLIFIERS

10 SPEAKER OUTPUT TERMINALS

Output terminal to connect the speakers in stereo or bridged mode to the amplifier.

11 POWER INPUT TERMINAL "GND"

Terminal to connect the amplifier to the negative or ground pole of the car battery.

12 REMOTE INPUT TERMINAL "REM"

Terminal to connect the amplifier to the automatic (remote) turn-on / turn-off lead of

the head unit.

13 POWER INPUT TERMINAL "+12 V"

Terminal to connect the amplifier to the positive +12V pole of the car battery.

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 9

EA470 4-CHANNEL AMPLIFIER

1a/1b RCA INPUTS 1/2-CH

Low-level stereo RCA signal input for connection with head-unit.

2a/2b RCA INPUTS 3/4-CH

Low-level stereo RCA signal input for connection with head-unit.

3INPUT GAIN CONTROL 1/2-CH

Input level control for 1/2-CH amplifier section - allowing to match the output voltage of the

head-unit's RCA line-outs to the amplifier input section.

4HIGH PASS FREQUENCY CONTROL 1/2-CH

Control for the frequency adjustment of the 18dB/oct. high-pass filtering of the speakers

connected to 1/2-CH output terminals.

5OPERATION MODE SWITCH 1/2-CH

Switch to select the operation mode of the crossover filter driving 1/2-CH section of the

amplifier.

6LOW PASS FREQUENCY CONTROL 1/2-CH

Control for the frequency adjustment of the 18dB/oct. low-pass filtering of the speakers

connected to 1/2-CH output terminals.

7INPUT GAIN CONTROL 3/4-CH

Input level control for 3/4-CH amplifier section - allowing to match the output voltage of the

head-unit's RCA line-outs to the amplifier input section.

8HIGH PASS FREQUENCY CONTROL 3/4-CH

Control for the frequency adjustment of the 18dB/oct. high-pass filtering of the speakers

connected to 3/4-CH output terminals.

9OPERATION MODE SWITCH 3/4-CH

Switch to select the operation mode of the active crossover driving 3/4-CH section of the

amplifier.

10 LOW PASS FREQUENCY CONTROL 3/4-CH

Control for the frequency adjustment of the 18dB/oct. low-pass filtering of the speakers

connected to 3/4-CH output terminals.

11 POWER LED

Green "operation" LED, signaling correct operation of the amplifier.

12 PROTECTION LED

Red "protection" LED, signaling faulty speaker connections or general malfunction of the

amplifier.

2.1 FRONT PANEL CONNECTIONS & CONTROLS

EM 2/4-CH Manual 2003 02.06.2003 17:40 Uhr Seite 10

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali EMPHASER Amplificatore

EMPHASER

EMPHASER EA2160S Istruzioni per l'installazione

EMPHASER

EMPHASER EA13000SPL Istruzioni per l'installazione

EMPHASER

EMPHASER EA1600D Manuale utente

EMPHASER

EMPHASER EA1450XT Istruzioni per l'installazione

EMPHASER

EMPHASER EA-MT1 Istruzioni per l'installazione

EMPHASER

EMPHASER EA4100-500 Istruzioni per l'installazione

EMPHASER

EMPHASER EA2190 Istruzioni per l'installazione

EMPHASER

EMPHASER EA-M1 Istruzioni per l'installazione

EMPHASER

EMPHASER EA-S2 Istruzioni per l'installazione

EMPHASER

EMPHASER EA-D800 Istruzioni per l'installazione

EMPHASER

EMPHASER EA285 Manuale di istruzioni

EMPHASER

EMPHASER ea1500-Bash Istruzioni per l'installazione

EMPHASER

EMPHASER EA490-200 Istruzioni per l'installazione

EMPHASER

EMPHASER EA24000D Istruzioni per l'installazione

EMPHASER

EMPHASER EA2500D Istruzioni per l'installazione

EMPHASER

EMPHASER EA1500FLX Manuale utente

EMPHASER

EMPHASER EA650-200 Istruzioni per l'installazione

EMPHASER

EMPHASER EA1800D Istruzioni per l'installazione

EMPHASER

EMPHASER EA-D500 Istruzioni per l'installazione

EMPHASER

EMPHASER EA2350 Istruzioni per l'installazione

EMPHASER

EMPHASER EA450-250 Istruzioni per l'installazione

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente