38105-0-0817Page 4
NOTICE: Install liners before logs. See separate Liner Installation
manual for details.
CAUTION
This replace is supplied with a set of twelve ceramic
ber logs. Do not handle these logs with your bare hands.
Always wear gloves to prevent skin irritation from ceramic
bers. After handling the logs, wash your hands gently with
soap and water to remove any trace of bers.
Accessing the Interior of the Fireplace
See Homeowners Manual for instruction on how to remove the
barrier screen and glass door.
Log Set Installation
The positioning of the logs is critical to the safe and clean
operation of this replace. Sooting and other problems may result
if the logs are not properly and rmly positioned in the replace.
Please refer to (Figure 1) and the following WARNING when
completing log placement instructions. For step by step log
placement instructions, See Pages 5 - 17 or reference (Figure 2).
WARNING
Failure to position the parts in accordance with this diagram
or failure to use only parts specically approved with this
replace may result in property damage or personal injury.
Figure 1
A
B
C
D
F
G
H
J
K
L
Figure 2
Glowing Embers Information
1. Carefully separate the ember material into small amounts
(no larger than “quarter-size” pieces).
a. Fluffed up pieces of ember material one layer thick
will produce the best ember glow. Do not place more
than one layer of ember material onto the burner.
Excess ember material will decrease the ember
glow effect.
b. Save any remaining ember material for future
applications (as needed).
NOTICE: You may place logs A & B prior to adding glowing
embers on burners.
Figure 3
Coal Information
1. Coals may be placed along the front burner as shown in
Figure 4. Coals may not be placed over burner ports.
Figure 4
LOG AND EMBER PLACEMENT
