EMSCAN EMxpert EHX Manuale utente

EMxpert EHX

User Manual

Notices

No part of this user manual may be reproduced in any form or by any means (including but not limited to

electronic storage and retrieval or translation into a foreign language) without prior consent from EMSCAN

Corporation as governed by Canada and international copyright laws.

Trademark Acknowledgements

Adobe Acrobat ® and Reader ® are U.S. registered trademarks of Adobe Systems Incorporated.

Windows ® is U.S. registered trademarks of Microsoft Corporation.

Warranty

The material contained in this user manual is provided “as is” and is subject to being changed, without

notice, in future editions. Further to the maximum extent permitted by applicable law, EMSCAN disclaims

all warranties, either expressed or implied, with regard to this user manual and any information contained

herein, including but not limited to the implied warranties of merchantability and fitness for a particular

purpose. EMSCAN shall not be liable for errors or for incidental or consequential damages in connection

with the furnishing, use, or performance of this document or any information contained herein. Should

EMSCAN and the user have a separate written agreement with warranty terms covering the material in

this document that conflict with these terms, the warranty terms in the separate agreement shall control.

Safety Notices

Caution

A CAUTION notice denotes a hazard. It calls attention to operating procedure, practice, or the like that,

if not correctly performed or adhered to, could result in damage to the product or loss of important data.

Do not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met.

Warning

A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like

that, if not correctly performed or adhered to, could result in personal injury or death. Do not proceed

beyond a WARNING notice until the indicated conditions are fully understood and met.

Notices

Safety Notices

Warranty

EMSCAN warrants to its customers that any EMxpert from the date of delivery will perform substantially in

accordance with the specifications provided, when properly installed, operated, maintained and repaired

for the duration of warranty purchased by the customer.

During the warranty period, EMSCAN will at its option either repair or replace, at no charge, EMxpert

products or parts thereof which do not perform in accordance with the specifications.

For warranty service or repair, EMxpert must be returned to EMSCAN. EMSCAN will pay shipping charges

to and from EMSCAN if Buyer is under warranty, original or extended. You can extend your original

warranty by purchasing option 3000-1810 or 3000-1811 (Additional One Year Customer Care Package).

Is your document and EMxpert software up-to-date?

Periodically, we update the documents and EMxpert software. You may access to the latest versions from

below links:

User manual: http://www.emscan.com/emxpert/EMx_userManuals.cfm

Training manual: http://www.emscan.com/emxpert/EMx_trainingManual.cfm

Software release notes: http://www.emscan.com/emxpert/EMx_softwrRelease.cfm

Technical bulletins: http://www.emscan.com/emxpert/EMx_TechnicalBulletins.cfm

FAQ: http://www.emscan.com/emxpert/EMx_FAQ.cfm

To receive email notifications for the updates, please contact us at [email protected]

Warranty

Software Updates

Table of Contents

Contact Information

............................................................................

About the EMxpert Products

...................................................................

Minimum System Requirements

...............................................................

Cables and Component Checklist

.............................................................

Connection Overview

..........................................................................

Option and Accessories

.......................................................................

Option and Accessories

.......................................................................

Quick Installation and Checklist

..............................................................

Hardware Setup

................................................................................

Software Installation

..........................................................................

External Spectrum Analyzer Setup for EHX

.................................................

Setup and Modes of Operation

...............................................................

Menu Bar

.......................................................................................

Quick Facts about Menu Bar

 .....................................................................

Viewing Scan Results

.........................................................................

Spectral View

 ....................................................................................

Spaal View

 .....................................................................................

Nodes

...........................................................................................

How to Add a Node?

 .............................................................................

How to Name a Node?

 ...........................................................................

How to View a Node?

 ...........................................................................

How to Delete a Node?

 ..........................................................................

How to Export Data?

 .............................................................................

Preferences: Analyzer and Display Opons

 .......................................................

Project Node Sengs

 ............................................................................

Overlay Editor (How to Superimpose Graphical Image of a DUT)

 ..................................

Report Generator

..............................................................................

Scan Types

.....................................................................................

Spectral Scan

..................................................................................

Spatial Scan

....................................................................................

Table of Contents

Spectral/Spatial Scan

..........................................................................

Handheld Probe Scan

........................................................................

Spectral Overlay

...............................................................................

Spectral Comparison

..........................................................................

Spatial Blind Spot Reduction

.................................................................

Spatial Comparison

...........................................................................

Measurement Tips

.............................................................................

Scanning a PCB

 ..................................................................................

Scanning a System Level Device

 ..................................................................

Appendix - Frequently Asked Questions (FAQ)

.............................................

Appendix - Error Messages

...................................................................

Appendix - Regulatory Compliance

..........................................................

Safety and Regulatory Informaon

 ...............................................................

FCC Class B Noce

 ...............................................................................

CSA Cercaon

 .................................................................................

CE mark

 .........................................................................................

Notes

...........................................................................................

Table of Contents

Contact Information

Contact EMSCAN Technical Support for your questions. Have your unit’s serial number, software and

rmware versions available as well as your PC Windows OS version when you contact EMSCAN

Technical Support.

Phone:

Toll Free (North America Only): +1-877-367-2261

International: +1-403-291-0313 ext 2

Fax:

+1-403-250-8786

E-mail:

[email protected]

Website:

www.emscan.com

Address:

EMSCAN Corporation

#1, 1715 27th Avenue N.E.

Calgary, Alberta, Canada T2E 7E1

The serial number is located at the bottom of the scanner.

Start EMxpert software and click to access to software and rmware versions:

Contact Information

Serial Number and Software Version

About the EMxpert Products

EMxpert product family provides board-level design teams with world-leading fast very-near-eld magnetic

data to help diagnose EMC design issues. EMxpert product line consists of EHX (high-frequency scanner)

and ERX (high-resolution scanner). These instruments capture and display visual images of spectral and

spatial scan results in seconds. This allows the design team to immediately analyze and compare design

iterations. PCB designers can scan any board to identify both constant and time-based emission sources

in the range of 150 kHz to 8 GHz.

EHX consists of a patented scanner and compact adaptor, and a customer-supplied spectrum analyzer

and PC running EMxpert software. Free Keysight IO software application must also be installed on the

customer-supplied PC. The patented scanner consists of 1,218 H-eld (magnetic) probes spaced every

7.5 mm into an electronically switched array, which provides an effective 3.75 mm resolution. The system

operates from 150 kHz to 4 GHz or 150 kHz to 8 GHz; the upgrade from 4 GHz to 8 GHz is enabled with

an optional software license key.

EHX+ is a self-contained very-near-eld scanning device which uses the EHX scanner along with a

built-in spectrum analyzer. Simply connect the EHX+ into the PC with an Ethernet connection, install the

EMxpert software on the customer-supplied PC and begin measurements. The system operates from

150 kHz to 8 GHz.

ERX+ is a self-contained high-resolution very-near-eld scanning device which uses the EHX scanner

mounted on X and Y stepper motors with 0.12 mm incremental measurement steps. It also has a

built-in spectrum analyzer. Simply connect the ERX+ into the PC with an Ethernet connection, install the

EMxpert software on the customer-supplied PC and begin measurements. The system operates from

150 kHz to 8 GHz.

Minimum System Requirements

• CPU 333 MHz or faster

• 128 MB RAM recommended for EHX

• 8 MB Video or more

• Windows XP/Vista/Windows 7/8/8.1 OS

• 10/100 Network Card

About EMxpert

EHX | EHX+ | ERX+

Cables and Component Checklist

Components Supplied with the EHX System

1. EHX adaptor

2. EMSCAN’s patented scanner

3. RF SMA to type N coaxial cable: It is referred as the RF cable in this manual. It connects

the scanner to the spectrum analyzer and has a SMA connector for the scanner and a

N connector for the spectrum analyzer 50 ohm input port. It transmits RF output of the

patented scanner to the spectrum analyzer.

4. Micro-D control cable: It connects the adapter to the scanner to enable control of the

EMSCAN’s patented scanner’s switched probes and to power the scanner.

5. USB Cable: It connects the PC (laptop or desktop) to the EHX adaptor. The USB Cable

provided with the system has ferrites on both ends of the cable

6. SMB-BNC Trigger Cable: It connects EHX adaptor to the spectrum analyzer.

7. Surface wave absorber: is only provided with the EMxpert EHX 8 GHz versions to test

above 6 GHz. (part numbers: 3000-1806 and 3000-1808)

8. EMxpert USB Drive includes the EMxpert software installation program and User Manual.

Customer Provided Components

1. SpectrumAnalyzer: It must include the necessary options to work with the EMxpert EHX (see Supported

Spectrum Analyzers). It measures the radio frequency (RF) signal received from the EMSCAN’s

patented scanner, generated by the very-near-eld emissions of an

adjacent activated PCB and it outputs the data to the PC.

2. PC (Laptop / Desktop): It must support a LAN 10/100 connection to the

spectrum analyzer and a USB connection (version 2.0 or higher) to the

adaptor or two USB connections, one for the spectrum analyzer and

one for the adaptor. It runs the EMxpert software and receives data,

which it can display and manipulate immediately or store for future data

presentation.

3. Ethernet or USB cable: It connects PC (laptop or desktop) to the spectrum analyzer.

About EMxpert

Cables and Component Checklist

Note:

Spectrum Analyzer,

Personal Computer (PC)

connected with Ethernet

cable must comply CE

emission requirements

Connection Overview

EHX Adaptor

EMSCAN’s Patented Scanner

Item Number Description

1SMB trigger cable port

2LED light shows three stages:

Red: Boot mode (this stage is fast; you may not even notice it)

Orange: Initiation mode (checking adaptor’s rmware)

Green: User mode (adaptor is connected and ready)

3USB connection port

4Micro-D control cable connection

5Micro-D control cable connection

6RF output port

About EMxpert

Connection Overview

1 32

Caution:

The surface of the scanner is made of Gorilla®glass. It may shatter if a sharp object is

dropped from a distance.

5 6

Option and Accessories

Part Number Description

3000-0216 LNA (frequency range: 10 kHz - 2.5 GHz)

3000-0815 Hard Transit Case to carry EHX with customized insert

3000-0817 Large Hard Transit Case to carry FieldFox and EHX with customized insert

3000-0818 Hard Transit Case EHX+, ERX and ERX+ with customized insert

3000-0104 Trade-in of any EMX to an EHX 8 GHz, EHX+, ERX or ERX+

3000-1801 EHX 4 GHz - 8 GHz Frequency range extension

3000-0304 DVT Solutions Far-Field Application

Predict the Open Area Test Site (OATS) or Semi Anechoic Chamber (SAC) radiated

EMI levels of a printed circuit board (PCB). Far-Field application supports 30 MHz

- 1 GHz regulatory compliance limits Class A or Class B FCC, CISPR and Industry

Canada, 10 m, 3 m and 1 m test distances

TWO-YEAR WARRANTY AND SUPPORT DIRECTLY FROM MANUFACTURER

Includes scanner absorber pad from EMSCAN

3000-1810 Additional one year Customer Care Package for the EHX. Includes:

- Parts & labour

- Software updates

- Free shipping to factory for repair and return

- Same day technical support

- Two 30 minute web training sessions per year

3000-1811 Additional one year Customer Care Package for the EHX+, ERX and ERX+. Includes:

- Parts & labour

- Software updates

- Free shipping to factory for repair and return

- Same day technical support

- Two 30 minute web training sessions per year

3000-1910 Calibration Assurance Plan for the EHX+ and ERX+ / Return to EMSCAN / 3 years

- Annual single calibration event included

- Freight to/from EMSCAN factory not included unless unit under original or extended

warranty

3000-1911 Calibration Assurance Plan for the EHX+ and ERX+ / Return to EMSCAN / 5 years

- Annual single calibration event included

- Freight to/from EMSCAN factory not included unless unit under original or extended

warranty

3000-0814 NRE Charge for custom development of a driver for any spectrum analyzer provided it

has the following conguration: Gated sweep, Pre-amplier, LAN or USB Port, External

Trigger Port with BNC Connector and VISA support

Customer to loan specic spectrum analyzer for 2 weeks

3000-0816 NRE Charge for custom development of a driver for any spectrum analyzer provided it

has the following conguration: Gated sweep, Pre-amplier, LAN or USB Port, External

Trigger Port with BNC Connector and VISA support

Equipment rental included provided it is available from rental companies

About EMxpert

Option and Accessories

Indice

Altri manuali EMSCAN Scanner

EMSCAN

EMSCAN EMxpert ERX+ Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente