EMTOP BB-ET6ULL Manuale utente

BB-ET6ULL

SOM-ET6ULL + SOM-ET6ULL-BB

User Manual

Version: 1.0

2023-01-03

Revision History：

Version

Date

Description

1.0

2023-01-03

Initial Release

iii

Table of Contents

1. PRODUCT OVERVIEW ............................................................................................ 4

1.1 INTRODUCTION .......................................................................................................4

1.2 HARDWARE FEATURES ........................................................................................... 4

1.2.1 SOM-ET6ULL ................................................................................................4

1.2.2 SOM-ET6ULL BB ..........................................................................................6

1.3 MECHANICAL DIMENSION ........................................................................................7

1.4 INTERFACE DETAILS ............................................................................................... 8

1.4.1 DC Power Input .............................................................................................8

1.4.2 USB Host .......................................................................................................8

1.4.3 Audio Input/Output ........................................................................................ 9

1.4.4 2x 1W Speaker Connector ..........................................................................10

1.4.5 10/100M Ethernet ........................................................................................11

1.4.6 DIN/DO ........................................................................................................12

1.4.7 CAN/RS485 .................................................................................................13

1.4.8 LCD ............................................................................................................. 14

1.4.9 Reset ........................................................................................................... 17

1.4.10 User Button ............................................................................................... 18

1.4.11 LED Indicator Light ....................................................................................19

1.4.12 TF Card ..................................................................................................... 20

1.4.13 4G ..............................................................................................................21

1.4.14 2.54mm Extension Interface .....................................................................23

1.4.15 USB Extension Interface ...........................................................................24

1.4.16 IO Extension ..............................................................................................25

1.4.17 Debug Port ................................................................................................ 26

1.4.18 Serial Download ........................................................................................27

1. Product Overview

1.1 Introduction

The SOM-ET6ULL BB is a baseboard that design by Emtop tech for the SO

M board SOM-ET6ULL. It features a lot of rich and flexible interfaces. Can be use

d for the customers to develop their user programs, verify their expected functions

and shorten product development cycle. The optional that with a box that can be

used directly by the customer, or they can be customized a box and used this Kit

directly for the productions.

1.2 Hardware Features

1.2.1 SOM-ET6ULL

Electrical Parameters

Working Temperature：0 °C~ 70°C（Commercial）

-45°C~ 85°C（Industrial）

Ambient Humidity：20% ~ 90%, non-condensing

Mechanical Dimensions：60mm x 27mm

Power Input：5V,1.8V/3.3V

Processor

Feature

Details

SOM-i.MX6ULL

Arm Cortex-A7 MPCore platform

Single ARM Cortex-A7 MPCore, including:

•32 KB L1 Instruction Cache

•32 KB L1 Data Cache

•Media Processing Engine (MPE)

Co-processor

•General Interrupt Controller(GIC)

•Global Timer

•Snoop Control Unit

•Target frequency of 528MHz

Audio

•S/PDIF Input and Output

•SAI modules supporting I2S,AC97,TDM

On-chip memory

•Boot ROM (96KB)

•Secure/non-secure RAM (32KB)

Memory and storage

DDR SDRAM

•512MB DDR3 SDRAM (16-bit bus width)

•Maximum 1GB support

•800MHz maximum DDR clock

eMMC

•4GB eMMC flash memory default

•8-bits MMC mode

•4~32GB storage option

•Nand or eMMC + SPI option

•256MB ~ 4GB storage option

Expandable flash (MicroSD)

•Meets SD/SDIO 3.0 standard Runs at

4-bits

•Supports system boot from SD card

•Supports high-capacity SDXC card up to

2TB

Network & Wireless

Ethernet

•10/100 Mbps Ethernet Controller

•Up to 2 MAC (6G2, 6G3 Only)

Hardware Interface

•5x UART

•2x ENET

I/O connectivity

•1x SDIO

•1x JTAG

•10x GPIOs

•10x SNVS_TAMPER

•2x OTG

Display Interfaces

• 24bits RGB LCD

Camera

• 8Bit CSI

1.2.2 SOM-ET6ULL BB

Electrical Parameters

Working Temperature：0 °C~ 70°C（Commercial）

-45°C~ 85°C（Industrial）

Ambient Humidity：20% ~ 90%, non-condensing

Mechanical Dimensions：135mm x 110mm

Power Input：12V/2A Maximum

Connectivity

2x 80Pin BTB Connector

12V Power Input;

6x USB 2.0 Host

Audio Input/Output

2x 1W Audio Output

2x 10/100Mbps Ethernet

1x RS385

1x CAN

2x DI

2x DO

1x 24Bits RGB LCD

1x TF Card Connector

1x MINI PCIe (For 4G module only)

1x SIM Card

1x MicroUSB Connector (For updated only)

1x 16Pin Extension Interface Include SPI, I2C and UART

1x 2.54mm Pin header for UART

1x 2.50mm Box header for Debug

1.3 Mechanical Dimension

1.4 Interface Details

1.4.1 DC Power Input

The SOM-ET6ULL BB places a DC Jack to feature a 12V power supply input. The

recommended power supply is 12V/2A. If some customized features are

requested, please contact the sales.

1) Part Reference：J4

2) Not special Pin1 is defined. The center is positive power input, and the negative

pole around.

3) Specification for the DC Jack as below:

1.4.2 USB Host

The SOM-ET6ULL BB order three double-deck USB type A connector to feature

six USB 2.0 host port for users.

1) Part Reference：J7, J9, J10.

2) Not special Pin1 is defined.

3) Specification for the double-deck USB Host as below:

1.4.3 Audio Input/Output

The SOM-ET6ULL BB order two 3.5mm audio connector to feature audio input

and audio output function. The audio output can drive a headphone directly and

the audio input can receive audio signal from microphone.

1) Part Reference：J16 for audio in, J13 for audio out.

2) Not special Pin1 is defined. The specification for the audio plug show as below:

3) Specification for the double-deck USB Host as below:

1.4.4 2x 1W Speaker Connector

The SOM-ET6ULL BB has two 2.00mm pin pitch 1x2pin WTB connectors that are

used for 1W stereo speaker internal. These interfaces can drive 1W per channel

into 8ΩBTL speaker.

1) Part Reference：J14, J15.

2) Not special Pin1 is defined.

3) Specification for the double-deck USB Host as below:

Indice

Altri manuali EMTOP Hardware per computer

EMTOP

EMTOP SBC-IMX8MM Guida utente

EMTOP

EMTOP Edge Computer Series Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente