Enable-IT 865Q PRO Manuale utente
Enable-IT 865Q PRO Gigabit
Professional Grade PoE Extender Kit
Quickstart Guide
Professional Grade Networking
All Rights Reserved © 1982 - 2024 Enable-IT™, Inc.
INSTALLING THE 865Q PRO ULTRA POE EXTENDER KIT
The Enable-IT 865Q PRO Ultra PoE Extenders have a distance restriction of 3,000ft (915m)
over 2-pair or more of Category rated 5e or better wiring from device extension to device
extension. Therefore a site survey of the wiring and installation planning are highly
recommended.
The 865Q Ultra PoE Extender is a 56V 150W very high power PoE Extender Solution for the
most demanding applications. This Power Detect solution supports any 802.3af/at or 802.3bt
standard PoE Device.
Perform an Out Of The Box Test (OOTBT)
We recommend that you perform a quick out of the box test to ensure the working order
of your Enable-IT 865Q PRO Ultra PoE Extender units prior to installing. This will also
serve to familiarize you with how easy the process should be.
Step 1) Using the provided Ethernet patch cord, connect the Interlink ports on the 865Q
units together as shown in the diagram below.
Step 2) Next connect your LAN Data Input into the 865Q PRO CO LAN 3 RJ45 port.
The ports are not auto sensing for PoE if you use a PoE Switch and can cause
issues, but the 865Q PRO uses it’s own much higher powered PoE source.
Step 3) Lastly connect the AC power cord to the 56V 150W DC Injector and to an AC
outlet.
The Green Interlink Status LEDs will start flickering slowly and then fast as the units talk
to each other. After a second you should see a solid Green Interlink Status LED on each
unit to confirm a link is established. This confirms basic proper operation of the units.
For a more detailed test and to confirm your PoE Device Equipment works with the 865Q
PRO units, connect your PoE Devices to the Gigabit LAN ports on the 865Q PRO CPE unit.
All Rights Reserved © 1982 - 2024 Enable-IT™, Inc. Page of2 4
865Q PRO CPE Unit
865Q PRO CO Power bundle
RJ-45 Interlink Cabling up to 3,000 feet / 915m
4 - PoE output ports
LAN Data IN Port 3
Do not use a PoE Switch
Performing the On-Site Installation
After removing the Enable-IT 865Q PRO Ultra PoE Extender Kit from the box, and performing
the Out Of The Box Testing (OOTBT), all that remains to install the unit on-site is to mount the
unit, build the interconnect wiring and attach the PoE device cabling with the provided Ethernet
Patch cords.
Troubleshooting
First examine the backbone wiring pair and make sure you have solid connections. The Interlink
Sync LED will be lit solid Green with rapid pulsing on each 865Q PRO unit to show proper connection
and pairing. If the Interlink Sync LED Link is flashing slow to fast and never goes solid…. Then follow
the steps below:
1) Make sure your wiring is straight through and not connected to any Telco punch down
blocks; If so remove from the block and use Telco butt clips to bridge wire.
2) Check for a firm connection of the RJ-45 connections in each 865Q PRO unit, and
power is applied to the 865Q PRO CO units.
3) You can easily isolate any issue by performing an Out Of The Box Test (OOTBT). This
test will confirm the correct working order of your Enable-IT 865Q PRO Ultra PoE
Extender Kit. This will point to a possible issue with your long distance Interlink wiring
being affected by possible outside interference.
865Q PRO (4-Port) DIP Switch Settings
•Default is all DIP switches Down = On for 4-port PoE
•Switch 1:
LAN 1 / LAN 2 PoE On – Down / On Position - Default
LAN 1 / LAN 2 PoE Off – Up / Off Position
•Switch 2: 4-Pair output
PoE 4-Pair – Down / On Position - Default
PoE 2-Pair – Up / Off Position (PIN 1,2,3 & 6)
•Switch 3:
LAN 3 PoE On – Down / On Position - Default
LAN 3 PoE Off – Up / Off Position
•Switch 4: Not Used
LAN 4 PoE On – Down / On Position - Default
LAN 4 PoE Off – Up / Off Position
All Rights Reserved © 1982 - 2024 Enable-IT™, Inc. Page of3 4
TECHNICAL SUPPORT
Online Technical Services
The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use
this support website as your first source for help as it contains an on-line knowledge base of articles,
documentation, FAQ's and other problem-solving resources. This web-based support resource
provides the quickest solution to the most common technical support issues.
Returning Products for Warranty Repair
Enable-IT warrants to the original purchaser of this described Product ("you" or the "End User") that,
for the limited lifetime period commencing on the date the Product was purchased (the “Warranty
Period"), the Product will be substantially free from defects in materials and workmanship under
normal use and conditions. Lifetime Warranty details here: https://warranty.enableit.com
This warranty does not apply to Products, which are resold as used, repaired or reconditioned.
Electrical or water damage is not covered under this warranty, extended warranties or
Advanced Replacement Program (AREP).
In order to obtain an authorized RMA approval, the End User must complete the required information
online located at https://support.enableit.com Ifyouhavequestionsordifficultycompletingthis
information you may contact the Customer Care Team at 888-309-0910 between the hours of 7:00
a.m. and 4:00 p.m. Pacific Time(PST).
Returning Products for Refund
Enable-IT, Inc. offers a generous 45-Day refund on a single Ethernet Extender Kit only, and is
subject to a 20% Restocking Fee. Shipments without a valid or authorized RMA number, or
sent to our corporate Las Vegas address, can be refused and / or billed for additional shipping.
CONTACT US
Sales and Customer Care:
Toll Free US and Canada 888 309-0910
Other International +1 702 924-0402
RMA Support:
https://support.enableit.com
All Rights Reserved © 1982 - 2024 Enable-IT™, Inc. Page of4 4
Altri manuali per 865Q PRO
1
Indice
Altri manuali Enable-IT Estensione
Enable-IT
Enable-IT 864 Manuale utente
Enable-IT
Enable-IT 865XW PRO Manuale utente
Enable-IT
Enable-IT 828 Manuale utente
Enable-IT
Enable-IT 824 Manuale utente
Enable-IT
Enable-IT 860 W PRO Manuale utente
Enable-IT
Enable-IT Pro 860C Manuale utente
Enable-IT
Enable-IT 828W Manuale utente
Enable-IT
Enable-IT 860W PRO Manuale utente
Enable-IT
Enable-IT 865XC PRO Manuale utente
Enable-IT
Enable-IT 860XSC PRO Manuale utente
Enable-IT
Enable-IT 860XC PRO Manuale utente
Enable-IT
Enable-IT 821W Manuale utente
Enable-IT
Enable-IT 860 Series Manuale utente
Enable-IT
Enable-IT 820WP PRO Manuale utente
Enable-IT
Enable-IT 824WP Manuale utente
Enable-IT
Enable-IT 360 Manuale utente
Enable-IT
Enable-IT 865W PRO Manuale utente
Enable-IT
Enable-IT 850 CPE Manuale utente
Enable-IT
Enable-IT 828 Manuale utente
Enable-IT
Enable-IT 865 Q PRO Manuale utente
