Enabling Devices 9098 Manuale utente
Mother’s 3rd Arm with Switch # 9098
USER’S GUIDE
Versatile!!
We’ve added our popular gumball switch to Mother’s Third Arm. You
can easily clamp it to any wheelchair, tray, tabletop, highchair or
stroller. Bend the flexible arm and position the switch anywhere,
enabling the user to simply activate a device. Size: 23"L x 2.5"D.
Operation:
1. Attach the clamp to your mounting surface by first turning the
clamp adjusting knob clockwise to loosen. Turn counter clock wise
to tighten, do not over tighten or you will damage clamp. Once the
Gooseneck is mounted you will want to adjust position of the
gooseneck for the best placement. Gently bend the Gooseneck to
the desired position. To fine tune your placement of the switch.
2. Plug the switch into the jack on your switch-adapted toy/device.
3. If it is necessary for you to use an adapter, make sure that you use
a MONO adapter, not a STEREO adapter.
4. Make sure that the connection between the switch and your
toy/device is tight. There should be no gaps.
5. Simply press anywhere on the switch’s top to activate your
toy/device.
6. The toy/device will only remain activated while switch continues
to be actuated. Once you release the switch, the toy/device will
turn off.
Troubleshooting:
Problem: The switch does not activate your toy/device.
Action #1: Make sure that the connection between the switch and your
toy/device is tight. There should be no gaps. This is a common error
and an easy fix.
Action #2: Try a different switch with your toy/device to rule out the
toy/device as the source of the problem.
Action #3: Try a different adapter (if applicable) to rule this out as the
source of the problem.
Care of Unit:
The Mother’s 3rd Arm with switch can be wiped clean with any
household multi-purpose cleaner and disinfectant. We recommend
Simple Green, which is a non toxic biodegradable all-purpose cleaner.
Do not submerge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Rev 1/24/11
Altri manuali Enabling Devices sedia a rotelle
