Enclume HDR3 Manuale di istruzioni

Boot and Mitten Drying Rack

ModelHDR3

WARNING:

The parts and hardware included are:

Hardware parts:

6 – 5/16"x 1/2"Button Head Screws

4 – 5/16"x 3/8"Button Head Screws

1 – 3/16"Allen Wrench

4 – Hard Glides

Components:

2 – Legs

2 – Boot Holders

2 – Uprights

1 – Upper Crossbar

4 – Accessory Hooks

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Assembly and Installation Instructions for the Hearth Drying Rack HDR3

Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Your exclusive remedy shall be

the repair or replacement of the defective product, which shall be subject to the following conditions: (1) Your notice of a defect is received by Enclume within the

warranty period, and (2) your return of the defective product to Enclume Design Products (24 Colwell St. , Port Hadlock, WA 98339) postage prepaid within 20

days following your receipt of a return authorization number from Enclume (which may be obtained by telephoning the number at the bottom of these instructions).

There are no other warranties, expressed or implied. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, AND ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF

THE PURCHASE OR USE OF THIS PRODUCT.

Enclume racks are the ultimate in Quality,

design, strength and function. Congratulations

for owning one of the finest storage racks

made.

Enclosed your will find everything needed

for the assembly and use of your hearth

rack.

READ ALL OF THE INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR RACK.

If you need help, please call 1-877-362-5863 or email

[email protected].

Rack Assembly: (Please note: Do not tighten the screws completely until rack is fully assembled)

1) Locate the legs and insert each end into one of the 4 hard glides. Then place the legs on the floor hard

glides down.

2) Place a boot holder cross wise on one end of the legs, align the holes and with the 5/16"x 1/2"button

head screws, attach to legs. Repeat on the other side.

3) Place one upright cross wise on one of the center holes with the L facing out and the tall side in the

center. Attach with one of the 5/16"x 1/2"button head screws. Repeat on the other side.

4) Place Top Cross bar between the 2 uprights and place the 5/16"x 1/2"button head screw through both

uprights and the cross bar.

5) Attach the 4 accessory hooks (2 on each side) with the 5/16"x 3/8"button head screws.

6) Square up the rack and tighten the screws securely.

7) Our hammered steel racks are finished with an industrial wax designed to give years of protection to the

rack. Cleaning is easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever

needed we recommend a commercial wax product.

WARNING

It is important that your rack is assembled correctly. If the unit is assembled

or used incorrectly, it could become unstable and collapse, possibly causing

injury. Please use caution when drying clothing near a fire source. Fabrics

are combustible and could ignite.

Enclume Designs LLC •24 Colwell Street •Port Hadlock, WA 98339 •360.385.6100 • www.enclume.com

Altri manuali Enclume Rack e supporto

Enclume

Enclume LR35 Manuale utente

Enclume

Enclume LR12A Manuale di istruzioni

Enclume

Enclume LR36 Manuale utente

Enclume

Enclume PR38 Manuale di istruzioni

Enclume

Enclume DR29 Manuale utente

Enclume

Enclume Square Pot Rack Manuale utente

Enclume

Enclume Decor DR20A Series Manuale di istruzioni

Enclume

Enclume PR13 Manuale utente

Enclume

Enclume LR2T Manuale utente

Enclume

Enclume Classic Rectangle Manuale utente

Enclume

Enclume QR1 Manuale di istruzioni

Enclume

Enclume LR2T Manuale utente

Enclume

Enclume DR 25 Manuale utente

Enclume

Enclume LR16 Manuale utente

Enclume

Enclume Decor DR23 Manuale utente

Enclume

Enclume PR35 Manuale di istruzioni

Enclume

Enclume Curved Sling Rack LR16 Manuale utente

Enclume

Enclume DR21 Manuale utente

Enclume

Enclume Classic Decor DR1 KD Series Manuale utente

Enclume

Enclume PR33 Manuale di istruzioni

Enclume

Enclume PR15 Manuale utente

Enclume

Enclume PR8b-24 Manuale utente

Enclume

Enclume DR17a Manuale di istruzioni

Enclume

Enclume DR1 KD Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente