Encore Networks EN-2000 Manuale utente

For information on trademarks, safety, limitations

of liability, and similar topics, see

http://www.encorenetworks.com/disclaimer.htm.

Go to Table

of Contents

Using the EN-2000’s Management

System

he EN-2000 provides wireless and wired connections to a local area network

(LAN), to a wide area network (WAN, and to peripheral devices and remote

devices. This document describes use of the EN-2000’s browser management system.

Any platform (PC, Mac, Linux, etc.) that supports a browser (Internet Explorer,

Firefox, Chrome, Safari, etc.) can manage the EN-2000. The following sections

discuss use of the EN-2000’s management system:

•Connecting to the EN-2000

•Activation of the Wireless Module

•Logging In

•Navigating the EN-2000’s Management System

•Ending the Session

2.1 Connecting to the EN-2000

The EN-2000’s management system displays in a browser window. A management

terminal (a computer) connects to the EN-2000. The management terminal can run

on any platform (for example, a Windows, Mac, or Linux platform) that supports a

web browser.

EN-2000™ Reference Manual

Document 2

Version A, March 2015

Page 2-2 EN-2000™ Reference Manual, Document 2

Go to Table

of Contents

The LAN port on the EN-2000’s front panel (Figure 2-1) is on a private network.

The EN-2000 software includes a DHCP server that assigns an IP address to a

device connected to its LAN port. A device connected to the LAN port sees the

gateway address 192.168.10.1, representing the EN-2000.

The EN-2000’s WAN port (also on the rear panel) is on a separate network from

its LAN port. The EN-2000’s WAN port is a DHCP client, by default.

2.2 Activation of the Wireless Module

When the EN-2000 is powered up, upon its initial attempt to connect to the

Verizon LTE network, automatic over-the-air (OTA) activation does the following:

• registers the LTE cellular module's International Mobile Station Equipment

Identity (IMEI) with the Verizon network

• registers the LTE cellular wireless module’s subscriber identity module (SIM)

ID with the Verizon network

• obtains the access point name (APN) from the Verizon LTE Authentication,

Authorization, and Accounting (AAA) server

Note: This activity can take as long as 20 minutes.

No action is required by the end user.

2.3 Logging In

1Make sure you have a terminal available to manage the EN-2000, and make

sure the terminal’s power is on.

2Connect the EN-2000 to its AC power adaptor, and plug the adaptor into an

AC outlet.

Note: The AC power adaptor must be rated for 12 volts DC.

❖The EN-2000 powers on.

Figure 2-1. EN-2000 Front Panel

Using the EN-2000’s Management System Page 2-3

Go to Table

of Contents

3Use an Ethernet cable to connect your management terminal to the Ethernet

LAN port on the EN-2000’s rear panel.

❖The LAN port assigns an IP address to your management terminal.

4On the management terminal, open a web browser.

5In the browser's address field, type the EN-2000’s gateway IP address

192.168.10.1 (or, if you prefer, type http://192.168.10.1), and press the

console’s Enter key (Figure 2-2).

Figure 2-2. Browser Address Field

Note: If the browser asks whether the EN-2000 router (192.168.10.1)

may set cookies, answer Yes, or Yes for the Session, or something

similar.

Caution: Do not block cookies for the EN-2000. Otherwise, you might not

be able to manage the EN-2000.

❖The browser navigates to the specified IP address and displays the

EN-2000 Log-In Screen (Figure 2-3).

Note: The Username field might display the user name.

Caution: The EN-2000 management system uses JavaScript in its browser-

based display. A message to enable JavaScript (similar to the message in

Figure 2-4) might display in your browser.

If you see the message in Figure 2-4, do the following:

• On the browser menu, open Tools or Options (or an equivalent menu

item in your browser).

• In the browser’s menu system, Enable JavaScript, and Save that setting.

• Right-click on the browser screen, and select Refresh, Rewrite, or

Reload (or the equivalent for your browser).

Figure 2-3. EN-2000 Log-In Screen

Figure 2-4. Message to Enable JavaScript

http://192.168.10.1

JavaScript required!

You must enable JavaScript in your browser or the management system will not work properly.

Page 2-4 EN-2000™ Reference Manual, Document 2

Go to Table

of Contents

❖The EN-2000 Log-In Screen is redisplayed, without a message to enable

JavaScript.

6Type your user name and password in the appropriate fields of the EN-2000

Log-In Screen. Use the default log-in values:

• The default user name is admin.

• Its associated default password is encore!1.

Note: You may wish to change the password in the future. Check with your

network administrator for all names and passwords.

7Then press the console’s Enter key or select the screen’s Login button

(below the Log-In fields).

❖The system accepts your log-in. Then the EN-2000 Status Overview

Screen is displayed (Figure 2-5). This screen provides an overview of the

EN-2000’s status.

Note: If the EN-2000’s WAN port is connected to a network, you might see

the WAN port’s assigned IP address. (The WAN port is a DHCP client by

default.) In Figure 2-5, the IP address assigned to the WAN port is

192.168.1.151.

On the EN-2000 management screens, the top row of tabs indicates the

management areas.

◆

Status

◆

System

◆

Network

◆

Logout

◆

Quickstart

There is a second row of tabs under each management area. The second row

provides detail for the selected management area. (The EN-2000 senses its

Figure 2-5. EN-2000 Status Overview Screen

Using the EN-2000’s Management System Page 2-5

Go to Table

of Contents

hardware configuration and displays tabs to represent that configuration.) In

Figure 2-5, the Status management area shows the following detail tabs:

◆

Overview

◆

Routes

◆

System Log

◆

Realtime Graphs

An Auto Refresh indicator (to the right of the Encore Networks logo) is

displayed on several screens. You can select this indicator to turn automatic

screen refreshment on or off.

8Do the following:

aTo use the EN-2000, see Navigating the EN-2000’s Management System.

bTo configure the EN-2000’s parameters, see the document Configuring the

EN-2000 for its Network Functions.

cTo review the EN-2000’s settings and performance, see the document

Monitoring the EN-2000.

2.4 Navigating the EN-2000’s Management

System

2.4.1 Saving or Discarding Changes

Buttons to Reset, Save, or Save & Apply are displayed in the lower righthand

corner of EN-2000 configuration screens. You can use them as described below:

• Select the Save & Apply button to save changes that take effect immediately.

• Select the Save button to save changes that will take effect after the EN-2000

is rebooted.

• Select the Reset button to discard changes you have made but have not yet

saved, and to see the screen with its values before you made those changes.

If you close the browser without saving changes in the configuration, the previous

configuration is used when you reopen the EN-2000 management system in the

browser.

2.4.2 Restarting (Rebooting) the EN-2000

There may be times when the EN-2000 needs to be restarted. We recommend

using the menu system to restart the EN-2000, because that provides a

controlled approach to restarting. Any processes that are running will be shut

down properly before the router restarts.

Caution: In general, do not manually restart the EN-2000 by disconnecting

it from its power source and then reconnecting it to power. That method of

rebooting might interrupt processes running on the EN-2000.

1To restart the EN-2000, select the System management area.

2Then select the Reboot tab.

❖The System Reboot screen is displayed (Figure 2-6).

Page 2-6 EN-2000™ Reference Manual, Document 2

Go to Table

of Contents

Figure 2-6. EN-2000 System Reboot

3On this screen, select Perform Reboot.

❖The menu system restarts the EN-2000. During the reboot, a message

similar to one of the messages in Figure 2-7 might be displayed.

Figure 2-7. Message while Rebooting

Note: Rebooting might take a minute or longer.

❖When the EN-2000 has rebooted, the EN-2000 Log-In Screen is displayed

(Figure 2-8).

2.5 Ending the Session

1When you wish to log out, select the Logout tab.

❖The system logs out, and the EN-2000 Log-In Screen is redisplayed (recall

Figure 2-8).

Waiting for 192.168.10.1...

Please wait. Device rebooting.

Figure 2-8. EN-2000 Log-In Screen

Altri manuali per EN-2000

Indice

Altri manuali Encore Networks Router di rete

Encore Networks

Encore Networks EN-4000 Manuale utente

Encore Networks

Encore Networks EN-2000 Manuale utente

Encore Networks

Encore Networks VSR-30 Manuale utente

Encore Networks

Encore Networks EN-1000 Manuale utente

Encore Networks

Encore Networks EN-2000 Manuale utente

Encore Networks

Encore Networks EN-2000 Manuale utente

Encore Networks

Encore Networks EN-1000 Manuale utente

Encore Networks

Encore Networks EN-4000 Manuale utente

Encore Networks

Encore Networks EN-2000 Istruzioni per l'uso e l'installazione

Encore Networks

Encore Networks VSR-1200 Manuale utente

Encore Networks

Encore Networks EN-2000 Manuale utente

Encore Networks

Encore Networks EN-4000 Manuale utente

Encore Networks

Encore Networks EN-4000 Manuale utente

Encore Networks

Encore Networks EN-4000 Manuale utente

Encore Networks

Encore Networks EN-4000 Manuale utente

Encore Networks

Encore Networks EN-1000 Series Manuale utente

Encore Networks

Encore Networks EN-2000 Manuale utente

Encore Networks

Encore Networks EN-2000 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza