Encore ENUTV-DAT Manuale utente
ENCORE
ENUTV-DAT
User Quick Installation Guide
1
Chapter 1: Introduction
1.1 Package Contents
Upon receiving your ENUTV-DAT, please make sure the following items are
included in the package.
zENUTV-DAT device
zApplication Driver CD
zQuick Installation Guide
zUSB extended cable
zAntenna
zPAL to NTSC connector
zRemote control
2
1.2 System Requirements
•Pentium 4 1.2 GHz or equivalent
•Minimum 256 MB memory (512MB DDR RAM recommended)
•Minimum 150 MB free hard disk space for program installation
•One free USB2.0 slot
•Microsoft Windows XP/Vista 32bit/Vista 64bit (Windows XP
Home/Professional with DirectX 9.0c and Windows Media Player 9 or 10
installed)
•CD-ROM/DVD-ROM drive
•For time-shifting and MPEG-2 capturing, a Pentium 4 2.0 GHz processor (or
higher) or equivalent is required.
•To support High definition TV (1080P) with DX-VA (video card hardware
acceleration) disable, a Pentium 4 2.8 GHz processor (or higher) or
equivalent is recommended.
•To support High definition TV, recommended to enable DX-VA (video card
hardware acceleration), graphic minimum requirement is：
◇ATI Radeon 7200 or above
◇nVidia Geforce MX 440 or above
◇Intel 82865 or above
•To Support High definition TV (1018P) and subtitle/DTV CC, recommended
to enable DX-VA (video card hardware acceleration), graphic minimum
requirement is：
◇ATI Radeon 9600 Pro with 128M RAM or above
◇nVidia Geforce FX 5200 with 128M RAM or above
(ATI Radeon X700 with 256M RAM or above, nVidia Geforce FX 6200 with
256M RAM or above recommended)
3
1.3 Usage of Remote Control
Key Win 2000/XP
Open/Close TV Software
Back button
Select / Enter button
Mute ON / Mute OFF button
0~9 Number Selections 0 to 9
Switch to the next channel
Switch to the previous channel
Volume High
Volume Low
Move Cursor Up button
Move Cursor Down button
Move Cursor Left button
Move Cursor right button
4
Chapter 2: Getting Started
2.1 Connect the ENUTV-DAT
1. Connect a digital TV antenna cable to
the TV Tuner Antenna port.
2. Connect the TV Tuner USB Stick to
Computer’s USB port.
5
2.2 Device Driver Installation for
Windows XP
3. Once you connect the TV box, just
follow the messages to finish the driver
installation.
2.2 Device Driver & Software Installation for Windows XP
To install the ENUTV-DAT to your computer, follow these steps:
1. When ENUTV-DAT is inserted to the
USB port the first time, a “Found New
Hardware” message will appear near
the computer’s clock. This is a sign
that Windows detected the TV Tuner.
Ignore this message.
6
2. Wait a few seconds and a new
Windows dialogue box will
automatically appear on your monitor
screen. Select “No, not this time”
then click “NEXT”
3. Choose “Install from a list or specific
location (Advanced)”. Click “Next”
button.
4. Check the “Include this location in the
search” and type-in “[CDROM Drive
letter:\Drv\32bit\”, Where: CDROM
Drive letter is the letter assign for
your CDROM drive, this can be any
letter, usually D: or E: Click “Next” to
install the device driver.
7
5. Click “Continue Anyway” button
6. Click “Finish” to end and finish the
installation of your new hardware
2.3 Install the TotalMedia™ software.
1. Double click “Setup.exe” from installation
CD.
2. Click “Setup Utility” to begin the software
installation.
8
3. Click “Yes” button to continue.
4. Click “Next” button or choose setup folder
for installation.
5. Click “Next” button.
9
6. Click “Finish” button to exit.
7. Use remote control or mouse to select TV
function.
8. Click “Next” button to continue.
10
Altri manuali per ENUTV-DAT
1
Indice
Altri manuali Encore Sintonizzatore TV
Encore
Encore ENUTV-3 Manuale utente
Encore
Encore ENLTV-FM-2 Manuale utente
Encore
Encore ENLTV-FM Manuale utente
Encore
Encore ENUTV-DIT2 Manuale
Encore
Encore ENLTV-FM Manuale utente
Encore
Encore ENUTV-DIT - Manuale utente
Encore
Encore ENUTV-2 Series Manuale utente
Encore
Encore ENLTV-FM3 Manuale utente
Encore
Encore ENLTV Manuale utente
Encore
Encore ENXTV-X3 Manuale utente
Encore
Encore ENLTV-DVB-S Manuale utente
Encore
Encore ENXTV-X2 EXTERNAL TV TUNER PRO Manuale utente
Encore
Encore ENLTV-FM3 - V4 Manuale utente
Encore
Encore ENLTV-FM3 Manuale utente
Encore
Encore ENLTV Manuale utente
Encore
Encore ENUTV-3 Manuale utente
Encore
Encore ENUTV-DAT Manuale utente
Encore
Encore ENXTV-X3 - 2 - REV 2010 Manuale utente
Encore
Encore ENXTV-X3 Manuale utente
Encore
Encore ENUTV-ADDT Manuale utente
