Endress+Hauser Fieldgate FXA42 Manuale utente

Products Solutions Services

Operating Instructions

Fieldgate FXA42

System Products

Gateway for data transmission via Ethernet, WLAN or

mobile telecommunications

BA01778S/00/EN/03.20

71483585

2020-05-15

Fieldgate FXA42

2 Endress+Hauser

Order code:

Ext. ord. cd.:

Ser. no.:

www.endress.com/deviceviewer Endress+Hauser

Operations App

XXXXXXXXXXXX

XXXXX-XXXXXX

XXX.XXXX.XX

Serial number

A0023555

• Make sure the document is stored in a safe place such that it is always available when

working on or with the device.

• To avoid danger to individuals or the facility, read the Basic safety instructions section

carefully, as well as all other safety instructions in the document that are specific to

working procedures.

• The manufacturer reserves the right to modify technical data without prior notice. Your

Endress+Hauser distributor will supply you with current information and updates to

these Operating Instructions.

Fieldgate FXA42 Table of contents

Endress+Hauser 3

Table of contents

1 About this document ................ 4

1.1 Symbols .............................. 4

1.2 Registered trademarks ................... 5

2 Basic safety instructions ............ 6

2.1 Requirements for the personnel ............ 6

2.2 Designated use ........................ 6

2.3 Workplace safety ....................... 6

2.4 Operational safety ...................... 6

2.5 Product safety ......................... 7

3 Product description ................. 8

3.1 Product design ......................... 8

4 Incoming acceptance and product

identification ..................... 10

4.1 Product identification ................... 10

4.2 Scope of delivery ...................... 10

4.3 Manufacturer address .................. 10

5 Installation ....................... 11

5.1 Installation conditions .................. 11

5.2 Dimensions .......................... 11

5.3 Mounting procedure ................... 12

5.4 Antenna ............................ 12

5.5 Post-installation check .................. 13

6 Electrical connection .............. 14

6.1 Supply voltage ........................ 14

6.2 RS485 serial interface (Modbus) .......... 14

6.3 Terminal assignment ................... 14

7 Commissioning .................... 17

7.1 Display elements (device status indicator /

LED) ............................... 17

7.2 Preparatory steps ...................... 18

7.3 Establishing the data connection .......... 18

7.4 Installing the latest firmware ............. 21

7.5 Configuration examples ................. 22

8 Operation ......................... 40

8.1 Home page .......................... 40

8.2 Grid View ........................... 40

8.3 Fieldgate FXA42 editor ................. 42

8.4 Settings ............................. 59

8.5 Event log messages at system start-up ..... 103

8.6 Dojo Toolkit ......................... 106

9 Diagnostics and troubleshooting .. 107

9.1 Faults indicated by the LEDs ............. 107

9.2 Restoring factory settings ............... 107

10 Maintenance .................... 107

10.1 Exterior cleaning ..................... 107

11 Repair ........................... 109

11.1 General notes ....................... 109

11.2 Return ............................. 109

11.3 Disposal ........................... 109

12 Accessories ...................... 110

12.1 Device-specific accessories .............. 110

12.2 Communication-specific accessories ....... 110

13 Technical data ................... 111

13.1 Input .............................. 111

13.2 Output ............................ 113

13.3 Environment ........................ 114

13.4 Certificates and approvals .............. 115

13.5 Telecommunications approval ........... 115

Index ................................. 117

About this document Fieldgate FXA42

4 Endress+Hauser

1 About this document

1.1 Symbols

1.1.1 Safety symbols

DANGER

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in

serious or fatal injury.

WARNING

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

serious or fatal injury.

CAUTION

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

minor or medium injury.

NOTICE

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.1.2 Electrical symbols

Ground connection

Grounded clamp, which is grounded via a grounding system.

Signal ground connection

A terminal that can be used as a ground contact for the digital input.

1.1.3 Communication symbols

Wireless Local Area Network (WLAN)

Communication via a wireless, local network

Light emitting diode is off

Light emitting diode is on

Light emitting diode is flashing

1.1.4 Symbols for certain types of information

Tip

Indicates additional information

Reference to documentation

Reference to another section

Series of steps

1.1.5 Symbols in graphics

1, 2, 3 ... Item numbers

Hazardous area

Safe area (non-hazardous area)

Fieldgate FXA42 About this document

Endress+Hauser 5

1.2 Registered trademarks

Modbus®

Registered trademark of SCHNEIDER AUTOMATION, INC.

Microsoft®

Registered trademark of the Microsoft Corporation, Redmond, Washington, USA

Basic safety instructions Fieldgate FXA42

6 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for the personnel

The personnel must fulfill the following requirements to carry out the necessary tasks,

e. g., commissioning and maintenance:

‣Trained, qualified specialists must have a relevant qualification for the specific function

and task

‣Are authorized by the plant owner/operator

‣Are familiar with federal/national regulations

‣Must have read and understood the instructions in the manual and supplementary

documentation

‣Follow instructions and comply with conditions

2.2 Designated use

2.2.1 Application

Fieldgates make it possible to remotely interrogate connected 4 to 20 mA, Modbus RS485

and Modbus TCP devices, either via Ethernet TCP/IP, WLAN or mobile

telecommunications (UMTS, LTE Cat M1 and Cat NB1). The measured data are processed

accordingly and forwarded to SupplyCare. In SupplyCare, the data are visualized, compiled

into reports and used for other inventory management tasks. However, it is also possible to

access the data transmitted by Fieldgate FXA42 without any additional software using the

Web browser. Comprehensive configuration and automation capabilities are available for

the Fieldgate FXA42 thanks to the integrated Web PLC.

2.2.2 Incorrect use

The manufacturer is not liable for damage caused by improper or non-designated use.

Verification for borderline cases:

‣For special fluids and fluids for cleaning, Endress+Hauser is glad to provide assistance

in verifying the corrosion resistance of process-wetted materials, but does not accept

any warranty or liability.

2.2.3 Residual risks

When in operation, the housing may reach a temperature close to the process

temperature.

Danger of burns from contact with surfaces!

‣For elevated process temperatures, ensure protection against contact to prevent burns.

2.3 Workplace safety

For work on and with the device:

‣Wear the required personal protective equipment according to federal/national

regulations.

‣Switch off the supply voltage before connecting the device.

2.4 Operational safety

Risk of injury!

‣Operate the device in proper technical condition and fail-safe condition only.

‣The operator is responsible for interference-free operation of the device.

Fieldgate FXA42 Basic safety instructions

Endress+Hauser 7

Conversions to the device

Unauthorized modifications to the device are not permitted and can lead to unforeseeable

dangers.

‣If, despite this, modifications are required, consult with Endress+Hauser.

Hazardous area

To eliminate a danger for persons or for the facility when the device is used in the

hazardous area (e.g. explosion protection, pressure vessel safety):

‣Based on the nameplate, check whether the ordered device is permitted for the

intended use in the hazardous area.

‣Observe the instructions in the separate supplementary documentation. The separate

supplementary documentation is an integral part of these Operating Instructions and

can be in the form of an XA or SD document, for example.

2.5 Product safety

This device is designed in accordance with good engineering practice to meet state-of-the-

art safety requirements, has been tested, and left the factory in a condition in which it is

safe to operate.

It meets general safety standards and legal requirements. It also complies with the EU

directives listed in the device-specific EU Declaration of Conformity. Endress+Hauser

confirms this by affixing the CE mark to the device.

Product description Fieldgate FXA42

8 Endress+Hauser

3 Product description

Information about accessories is provided in the Accessories section.

3.1 Product design

Four versions of the Fieldgate FXA42 are available. These versions differ in terms of the

device features and data transmission technology.

ABC / D

1 1 1

13 13

10 10

12 11

4545

12 11 12 11

A0030516

 1 Fieldgate FXA42 versions and design

A FXA42-A Ethernet

B FXA42-B Ethernet and WLAN

C FXA42-C Ethernet and 2G/3G

D FXA42-D Ethernet and LTE Cat M1 and Cat NB1 (2G/4G)

1 Slot for memory card, card type: microSD

2 Status LED for modem / WLAN / Ethernet

3 Status LED for supply voltage

4, 5 Input modules with analog input, digital input, current source and reference potential →  14

6 Status LED for network

7 Status LED for Web PLC

8, 9 Ethernet connections

10 Reset button

11 Power supply for Fieldgate FXA42, power supply for digital outputs, digital outputs →  14

12 RS-485 serial interface →  14

13 Connection for antenna (only WLAN and mobile telecommunications versions)

14 Slot for SIM card (only mobile telecommunications versions)

3.1.1 Supported frequency bands for mobile telecommunications

FXA42-C: supported frequency bands UMTS (2G/3G)

Band 2 (1900 MHz), Band 3 (1800 MHz), Band 5 (850 MHz), Band 8 (900 MHz)

Band 1 (2100 MHz), Band 2 (1900 MHz), Band 4 (1700 MHz), Band 5 (850 MHz), Band

6 (800 MHz), Band 8 (900 MHz)

FXA42-D: supported frequency bands LTE Cat M1 and Cat NB1 (2G/4G)

Band 2 (1900 MHz), Band 3 (1800 MHz), Band 5 (850 MHz), Band 8 (900 MHz)

Fieldgate FXA42 Product description

Endress+Hauser 9

Band 1 (2100 MHz), Band 2 (1900 MHz), Band 3 (1800 MHz), Band 4 (AWS 1700 MHz),

Band 5 (850 MHz), Band 8 (900 MHz), Band 12 (700 MHz), Band 13 (700 MHz), Band

18 (800 MHz), Band 19 (800 MHz), Band 20 (800 MHz), Band 26 (850 MHz), Band 28

(700 MHz)

Incoming acceptance and product identification Fieldgate FXA42

10 Endress+Hauser

4 Incoming acceptance and product

identification

4.1 Product identification

The following options are available for identifying the gateway:

• Nameplate specifications

• Order code with breakdown of the device features on the delivery note

• Enter the serial number on the nameplate into W@M Device Viewer

(www.endress.com/deviceviewer): all the information about the gateway is displayed.

• Enter the serial number on the nameplate into the Endress+Hauser Operations App or

scan the 2-D matrix code (QR code) on the nameplate with the Endress+Hauser

Operations App: all the information about the gateway is displayed.

4.1.1 Nameplate

Dat.:

Ser. no.:

4...20 mA In

Digital In 5/11V, <5mA, max.35V

Digital Out DC PNP

MODBUS RS485

LAN1/2: 10/100 Mbps

MAC:

24V±20% DC SELV/PELV/NEC class2

Supply mandatory

-20°C... +60°C

-20°C... +50°C row mounting

Ta:

Order code: IP20

Fieldgate FXA42

Made in Germany, D-79689 Maulburg

FXA42-A

P 8W

A0030895

1 Order code

2 Serial number

4.2 Scope of delivery

• Fieldgate FXA42 for DIN rail mounting

• SD card (card type: microSD), 1 GB

• Hard copy of Brief Operating Instructions

Information about accessories is provided in the Accessories section.

4.3 Manufacturer address

Endress+Hauser SE+Co. KG

Hauptstraße 1

79689 Maulburg, Germany

Address of the manufacturing plant: See nameplate.

Altri manuali per Fieldgate FXA42

Indice

Altri manuali Endress+Hauser Portale

Endress+Hauser

Endress+Hauser Fieldgate FXA42 Specifiche tecniche

Endress+Hauser

Endress+Hauser Fieldgate FXA320 Manuale

Endress+Hauser

Endress+Hauser Connect Sensor FXA30 Manuale utente

Endress+Hauser

Endress+Hauser Firldgate SFG500 Manuale utente

Endress+Hauser

Endress+Hauser Fieldgate PAM SFG600 Specifiche tecniche

Endress+Hauser

Endress+Hauser Fieldgate FXA320 Manuale utente

Endress+Hauser

Endress+Hauser Fieldgate FXA720 Manuale utente

Endress+Hauser

Endress+Hauser FieldGate SWG50 Manuale utente

Endress+Hauser

Endress+Hauser Fieldgate FXA520 Manuale utente

Endress+Hauser

Endress+Hauser WirelessHART Fieldgate SWG70 Manuale utente

Endress+Hauser

Endress+Hauser WirelessHART Fieldgate SWG70 Manuale utente

Endress+Hauser

Endress+Hauser WirelessHART Fieldgate SWG70 Specifiche tecniche

Endress+Hauser

Endress+Hauser Fieldgate SFG500 Manuale utente

Endress+Hauser

Endress+Hauser WirelessHART Fieldgate SWG70 Manuale utente

Endress+Hauser

Endress+Hauser Fieldgate FXA720 Manuale utente

Endress+Hauser

Endress+Hauser Fieldgate FXA320 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente