Eneo AK-21 Manuale utente

EN
DE
Learn more about eneo IN series
on our YouTube channel.
Quick Installation Guide
AK-21
Accessory part
for eneo products

2

3
EN
TABLE OF CONTENT
SAFETY INSTRUCTIONS �������������������������������������������������������������������������������������������������������� 4
General������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������4
Product specic �������������������������������������������������������������������������������������������������������������������������������������������������������������������������5
WEEE (Waste Electronical & Electronic Equipment) �����������������������������������������������������������������������������������������������������6
Graphical Symbols��������������������������������������������������������������������������������������������������������������������������������������������������������������������6
PRIOR TO USE �������������������������������������������������������������������������������������������������������������������������7
Dimensions (in mm) & Specications��������������������������������������������������������������������������������������������������������������������������������7
Parts supplied�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������7
INSTALLATION������������������������������������������������������������������������������������������������������������������������ 8
Ceiling Mounting ����������������������������������������������������������������������������������������������������������������������������������������������������������������������8
Wall Mounting����������������������������������������������������������������������������������������������������������������������������������������������������������������������������8
Mounting Holes�������������������������������������������������������������������������������������������������������������������������������������������������������������������������9

4
SAFETY INSTRUCTIONS
General
• Before switching on and operating the system, rst read this safety advice and the operating instructions�
• Keep the operating instructions in a safe place for later use�
• Installation, commissioning and maintenance of the system may only be carried out by authorised individu-
als and in accordance with the installation instructions - ensuring that all applicable standards and guidelines
are followed�
• Protect the devices from water penetration and humidity, since these can cause lasting damage�
• Should moisture nevertheless enter the system, under no circumstance switch on the devices under these
conditions, instead send them for examination to an authorised specialist workshop�
• The system must never be used outside of the technical specications, since this can destroy it�
• The device must be protected from excesses of heat, dust, humidity and vibration�
• When separating the system from the voltage supply, only ever use the plug to pull out the cable� Never pull
directly on the cable itself�
• Lay the connecting cables carefully and check that they are not mechanically stressed, kinked or damaged
and that no humidity can penetrate into them�
• In the event of a malfunction, please inform your supplier�
• Maintenance and repairs may only be carried out by authorised specialist personnel�
• The system must be isolated from the power supply before opening the housing�
• The device may only be opened by qualied service personnel� Unauthorised access invalidates any warranty
claim�
• Connection cables should always be exchanged through Videor E� Hartig GmbH�
• Use only original spare parts and accessories from Videor E� Hartig GmbH�
• The housing should only be cleaned using a mild domestic cleaning agent� Never use solvents or petrol as
these can permanently damage the surface�
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are not
displaced during installation� Damaged seals must not be installed and will invalidate any warranty�
• The installer is responsible for the maintenance of the enclosure as per the technical data, e�g� by sealing the
cable outlets with silicone�
• Wire end ferrules should be used when shortening the exible connection cables�
• The devices may only be operated in the temperature range indicated in the data sheet and within the
dened air humidity range�

5
EN

6
WEEE (Waste Electronical & Electronic Equipment)
Correct Disposal of This Product (Applicable in the European Union and other European countries with separate
collection systems)�
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life� To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources� Household users
should contact either the retailer where they purchased this product, or their local government oce,
for details of where and how they can take this item for environmentally safe recycling� Business users
should contact their supplier and check the terms and conditions of the purchase contract� This prod-
uct should not be mixed with other commercial wastes for disposal�
Graphical Symbols
Please pay attention to the safety instructions, and carefully read through this instruction guide before initial operation�
Important points of warning are marked with a caution symbol�
Important points of advice are marked with a notice symbol�

7
EN
PRIOR TO USE
• Install the mount onto a strong structure such as concrete wall
• Use the supplied accessories when installing the mount bracket depends on mounting
position
Dimensions (in mm) & Specications
Construction:
Aluminum Cast
Dimensions(mm):
Ø 134,30 x 56,50
Weight:
396,00 g (0�87 lb)
Parts supplied
Junction Box
Sealing ring
Installation Template
Screw Driver
Screws
QIG
Expansion Bolts

8
INSTALLATION
Ceiling Mounting
Wall Mounting
1� Use the mounting template to drill the necessary holes in the correct position in
the ceiling�
2� Hammer the four expansion crews into the holes�
3� Feed the power and BNC cables through the box�
4� Secure the box with the four screws�
5� Insert the sealing ring into the bracket to seal it�
6� Tighten the box cover with the four screws on the bottom of the box�
7� Connect the power and BNC cables to the camera cables�
8� Adjust the angle of view of the camera�
9� Attach the camera mount to the housing cover�
1� Use the drilling template to drill the necessary holes in the correct position in the
wall�
2� Then mount the box on the wall by following steps 2-9 for ceiling mounting�

9
EN
Mounting Holes
1-4:
not needed
5:
Use these holes for mounting the Mounting the INB-5xx / INB-6xx Bullet Camera
Base diameter: Ø 84,00 mm
6:
Use these holes for mounting the Mounting the MED-55F0036MOA Turret Camera
Base diameter: Ø 90 mm
7-8:
not needed
9:
Use these holes for mounting the Mounting the INB-7xx Bullet Camera
Base diameter: Ø 108 mm
10:
not needed
11:
Use these holes for mounting the Mounting the IND-5xx Turret Camera
Base diameter: Ø 135,6 mm
1
1
1
2
3
4
3
3
2
2
4
455
5
6
7
7
8
8
9
9
11
11
10
6
6
7
911
8
10
8
10

10
Altri manuali per AK-21
1
Indice
Lingue:

















