Eneo IPD-65M2713P5A Manuale utente
EN
DE
FR
IT
Quick Installation Guide
1/2.8" Network Dome, Fixed,
2592x1944, Day&Night, DOL-
WDR, 2.7-13.5mm, Infrared,
Indoor
IPD-65M2713P5A
2
Table of content
Parts supplied ...............................................................................................................5
Part names .....................................................................................................................6
Installation instructions ...............................................................................................7
Installation Instructions ..................................................................................................................................................8
Pan & Tilt adjustments.....................................................................................................................................................8
Installation and commissioning Instructions....................................................................................................... 10
Power supply connections.......................................................................................................................................... 10
Quick Network Setup ..................................................................................................11
Web viewer description .............................................................................................................................................. 12
Player control & Display.......................................................................................................................................... 12
PTZ Control.................................................................................................................................................................. 13
Setup Menu Table ..................................................................................................................................................... 13
Quick Setup .................................................................................................................15
Information ...................................................................................................................................................................... 15
Users ................................................................................................................................................................................... 15
Add ................................................................................................................................................................................ 16
Edit.................................................................................................................................................................................. 16
Delete ............................................................................................................................................................................ 16
Date & Time ..................................................................................................................................................................... 17
Current Time ............................................................................................................................................................... 17
New Time...................................................................................................................................................................... 17
Time Zone.................................................................................................................................................................... 17
Day & Time Display................................................................................................................................................... 17
Network ............................................................................................................................................................................. 18
IPv4 Address ............................................................................................................................................................... 18
IPv6 Address ............................................................................................................................................................... 19
DNS ................................................................................................................................................................................ 19
Further information ....................................................................................................20
3
EN
Safety instructions
General safety instructions
• Before switching on and operating the system, rst read this safety advice and the operating instructions.
• Keep the operating instructions in a safe place for later use.
• Installation, commissioning and maintenance of the system may only be carried out by authorised
individuals and in accordance with the installation instructions - ensuring that all applicable standards and
guidelines are followed.
• Protect the devices from water penetration and humidity, since these can cause lasting damage.
• Should moisture nevertheless enter the system, under no circumstance switch on the devices under these
conditions, instead send them for examination to an authorised specialist workshop.
• The system must never be used outside of the technical specications, since this can destroy it.
• The device must be protected from excesses of heat, dust, humidity and vibration.
• When separating the system from the voltage supply, only ever use the plug to pull out the cable. Never
pull directly on the cable itself.
• Lay the connecting cables carefully and check that they are not mechanically stressed, kinked or damaged
and that no humidity can penetrate into them.
• In the event of a malfunction, please inform your supplier.
• Maintenance and repairs may only be carried out by authorised specialist personnel.
• The system must be isolated from the power supply before opening the housing.
• The device may only be opened by qualied service personnel. Unauthorised access invalidates any
warranty claim.
• Connection cables should always be exchanged through Videor E. Hartig GmbH.
• Use only original spare parts and accessories from Videor E. Hartig GmbH.
• The housing should only be cleaned using a mild domestic cleaning agent. Never use solvents or petrol as
these can permanently damage the surface.
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are
not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.
• The installer is responsible for the maintenance of the enclosure as per the technical data, e.g. by sealing
the cable outlets with silicone.
• Wire end ferrules should be used when shortening the exible connection cables.
• The devices may only be operated in the temperature range indicated in the data sheet and within the
dened air humidity range.
Product - Specic Safety Instructions
• The camera may never be pointed directly at the Sun with the aperture open (this will destroy the sensor).
• It is unavoidable that during manufacture and to a certain extent during later use, humidity will be present
in the ambient air within the device’s housing. In the event of large temperature uctuations, this humidity
may condense inside the housing.
• To avoid this condensation inside the very tightly sealed housing, the manufacturer has inserted silica gel
sachets in the housing of the various camera types.
• It is however a physical given, that these silica gel bags will reach saturation after a certain amount of time.
They should therefore be replaced with new silica gel sachets.
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are
not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.
• A multipolar, easily accessible isolation device should be installed in the proximity of the IR Spotlight, in
order to disconnect the device from the power supply for service work.
• The earth connection must be made according to the low impedance requirement of DIN VDE 0100.
• Subsequent painting of the equipment surface can impair the function.
• Any warranty claim is invalidated by subsequent painting.
• A safety margin of > 1m from the spotlight must be maintained when viewing directly into the IR Spotlight
in a darkened environment.
• Do not look directly at invisible LED radiation using optical instruments (e.g. a reading glass, magnifying
glass or microscope), since this can endanger the eyes, LED Class 1M.
• Operation of the IR spotlight with a defective cover or during repair is prohibited.
4
• Please ensure that you only clean the bubble of the dome camera with specially designed microber
cloths. Failure to do so may damage the bubble and reduce video quality!
Class A device note
This is a Class A device. This device can cause malfunctions in the living area; in such an event, the operator may
need to take appropriate measures to compensate for these.
WEEE (Waste Electronical & Electronic Equipment)
Correct Disposal of This Product (Applicable in the European Union and other European countries with separate
collection systems).
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government
oce, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Graphical symbols
Please pay attention to the safety instructions, and carefully read through this instruction guide before initial
operation.
Important points of warning are marked with a caution symbol.
iImportant points of advice are marked with a notice symbol.
5
EN
Parts supplied
• Dome Camera
• Operating Instruction
• Mounting Template
• Plastic Anchor: 6 x 30 mm (3x)
• Mounting Screw: 3,5 x 25mm (3x)
• Open Driver
• Easy Adaptor
• Tilted Adaptor
6
Part names
Power Cable
Lens
Dome Cover
Light Sensor
Dome Base
Easy Adaptor
Flat type
IP Reset Button
3-Axis Gimbal
Tilted Easy Adaptor
Bubble Dome
Micro SD-Card Slot (option)
IR LEDs
7
EN
Installation instructions
CAUTION: The camera’s base should be attached to a structural
object, such as concrete, hard wood, wall stud or ceiling rafter
that supports the weight of the camera. If necessary use appro-
priate mounting material (e.g. anchors) instead of the material
enclosed with the camera.
1. Drill three holes for mounting on the ceiling or wall.
2. Attach the Easy Adaptors at the pre-drilled installation position and x it by using
mounting screws.
3. Route the power cable to the connecting place.
4. Place the dome base assembly to the Easy Adaptor.
5. Adjust the camera’s viewing angle (Pan, Tilt, Rotation)
6. Tighten the set screw to x a pan plate after the setting.
7. Assemble the dome cover to the dome base unit.
Optional mounting accessories
For information on optional mounting accessories please visit the eneo website at www.
eneo-security.com.
Plastic Anchor
Mounting Screw
OPEN
LOCK
8
CAUTION: In the case of installation with Flush/ Surface/ Tilted
mount, IP protection rating is not guaranteed.
If power/video connectors are exposed to water or rain, separate
protection shield is essential.
Installation Instructions
Open the dome cover
1. Insert wide side of the Open Tool into the lock of the dome cover.
2. Hold the dome housing with one hand and turn the Open Tool until the dome
cover is suciently open.
3. Once the dome base and the dome cover are detached, press the edge of the
dome cover and pull it down with hands.
12
Detach the dome camera from the Easy Adaptor
Push the hook on the dome base and turn the dome base counter-clockwise. Then de-
tach the dome camera from the installed Easy Adaptor.
1
2
3
Pan & Tilt adjustments
1. Pan limit: Pan is limited to +/- 165°. Do NOT force to rotate the gimbal over the
limit to prevent from the internal damage.
2. Tilt limit: Tilt is limited to 25° min ~ 90° max. with reference to the ceiling when
the inclination of camera module is 0°, that is, the image is aligned horizontally.
9
EN
3. Inclination limit (Horizontal image alignment): Inclination limited to +/- 60° max.
25º
90º
Extended viewing angle
Tilted Easy Adaptor (Option)
10º
15º
CAUTION (LED type only):
Be careful the IR LEDs when you control the 3-Axis gimbal.
Remove the sticker after adjustments..
10
CAUTION:
Be careful with the cable twisting during pan or tilt adjustments.
Extreme care should be taken NOT to scratch the bubble dome sur-
face while the camera installing or adjusting.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
Do not expose the camera directly to a strong light source such as the
sun or spot light.
Installation and commissioning Instructions
1. Make sure the power is removed before the installation.
2. After all connections are nished properly, follow the order for applying power.
• Plug the network cable into RJ-45 Ethernet Port.
If PoE is the unique power, there will be no need to connect Power terminal.
• When DC12V Local power is necessary, connect the low voltage
(DC12V) rst, then plug the DC adapter to DC outlets to avoid an improper reset
from power jitter and a damage from the surge voltage when no load.
When PoE and Local DC power are connected at the same time, Local power has priority.
Power supply connections
Camera can work with either DC12V or PoE(IEEE Std. 802.3af). Primary and secondary
grounds are completely isolated to avoid the possible ground loop problems.
Indice
Lingue:
Altri manuali Eneo Macchina fotografica digitale
Eneo
Eneo HDB-2000MIR720 Manuale utente
Eneo
Eneo VKC-1368-WL/W3 Manuale utente
Eneo
Eneo ISM-62F0028W0A Manuale utente
Eneo
Eneo VKC-1382/IR316 Manuale utente
Eneo
Eneo HDC-1004M1080 Manuale utente
Eneo
Eneo APB-7SV2812MVA Manuale utente
Eneo
Eneo VKC-1358A/IR Manuale utente
Eneo
Eneo VKC-1374/IR Manuale utente
Eneo
Eneo VKC-1327A/VAR49 Manuale utente
Eneo
Eneo HDC-2180Z03 D Manuale utente
