Eneo MPB-72M0550M0A Manuale utente

User Manual

1/2.8” HD Camera, Day&Night,

1920x1080, Infrared, WDR,

12/24V, IP67

MPB-72M2812M0A

MPB-72M0550M0A

Safety Precaution

MPB-72MxxxxM0A

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent electric shocks and risk of fire hazards, do NOT use other than

specific power source.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

Mains power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power mains interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

MPB-72MxxxxM0A

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension

and may differ from actual video of the camera.

Avoid installing areas where has shock or vibration which results in the problems.

Pay attention to safety when laying the connection cable and observe that the cable

is not subjected to heavy loads, kinks or damage and no moisture can get in.

The warranty becomes void if repairs are undertaken by unauthorized persons.

Maintenance and repair have to be carried out only by authorized service centers.

Use only a mild detergent to clean the housing.

The camera should never be operated beyond the technical specifications.

This can lead to destruction.

The camera should never be operated in water.

MPB-72MxxxxM0A

Contents

Safety Precaution

p.03~04

Contents

p.05

Features

p.06

Composition

p.07

Dimensions

p.07

Part Names

p.08

Installation Instructions

p.09~11

Operating Instructions

p.12~28

Specifications

p.29

MPB-72MxxxxM0A

Features

Key Features

• Full-HD 2Mega pixel CAMERA, 1920x1080(30p/25p)

• The best low light performance with SONY’s STARVIS sensor

•

Video output EX-SDI 1.0,2.0 / HD-SDI / TVI mode / AHD mode / CVI mode

or CVBS Selectable

• TVI mode / AHD mode / CVI mode, Video Transmission Distance

over Coax.; 500M

• f=2.8~12mm F1.4, 5Mega pixel Motorized zoom lens (MPB-72M2812M0A)

•f=5~50mm F1.6, Mega pixel Motorized zoom lens (MPB-72M0550M0A)

• Automatically removable IR Cut filter by Dual filter switcher

• SNAP Focus by Motorized Zoom lens

• Motorized Zoom & Focus Adjustment

• Sensitivity of Color 0.08 Lux(LED off), B/W 0.005 Lux (LED off)

• True WDR (Wide Dynamic Range), 30/25fps

• ROI (Region of Interest) WDR mode:

- Proper compensation of exposure for each inside and outside of

interested area.

- Better contrast and No motion ghost effect

• Improved Noise figure with the enhanced 3D-NR

• Motion Detection, Privacy Mask, Defog, Sens-up(~x32), ACE(D-WDR),

Sharpness, Mirror/Flip, BLC/HLC, Anti-Saturation, Smart IR, Title Set

• Top performance at low light sensitivity (Sens-up On)

• Selectable Digital output 1080p or 720p

• OSD Menu & Video Sub-out port for easy installation & maintenance

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• UTC control through HD-TVI (Pelco-C, Hikvision) / AHD

• Built-in 5pcs High power LED : Equivalent to 50 IR-LEDs

• Dual Window

• One-touch 3-Axis locking bracket, Easy installation pad

• IP67 protection

Composition

MPB-72MxxxxM0A

Dimensions

(unit : mm)

Video Sub-out

Cable (1pc)

Mounting

Template

Operating

Instruction

Torque Wrench:

3mm (1pc)

Camera

Easy

Bracket

Mounting Screw:

4 x 30mm (4pcs)

Plastic Anchor:

6 x 30mm (4pcs)

Assembly Screw:

4 x 15mm (4pcs)

267

108

87.30

100

86.40

75.90

190

MPB-72MxxxxM0A

Part Names

■Adjustment of viewing angle with a bracket

Torque

wrench

Lock/Unlock

Screw

• Extreme care should be taken NOT to

scratch the window in front of lens.

• Care should be taken the cable is NOT

to be damaged, kinked or exposed in

the hazardous area.

• Do not expose the camera directly to

a strong light source such as the sun

or spot light.

CAUTION

Power/Video

Cable

Sunshield

Sunshield Bold

Easy

Bracket

OSD Setup

Control Cover

Bracket

Lock/Unlock

Screw

MPB-72MxxxxM0A

Installation Instructions

Torque Wrench

Assembly Screw

: 4x15mm

Mounting Screw

: 4x30mm

1. Locate the mounting template at the installation position and drill the ceiling or

wall if needed. ( *The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and fix it through using mounting

screws (4x30mm). Skip this step when an easy bracket is not installed.

3. Route the Power cable to the connecting place.

Hook up the camera bracket with the easy bracket as illustrated below.

4. Fix the camera bracket through using assembly screws (4x15mm).

5. Set the camera’s viewing angle.

6. Put the sunshield to the camera unit and tighten the sunshield-bolts.

REAR VIEW

Cable exit

MPB-72MxxxxM0A

Installation Instructions

Pan & Tilt adjustments

1) Pan limit:

Pan is limited to +/- 90°.

3) Inclination limit

(Horizontal image alignment):

Inclination limited to +/-90° max.

2) Tilt limit:

Tilt is limited to 0°(2°) min ~ 90° max.

for wall(ceiling) installation respectively

with reference to the wall(ceiling) when

the inclination of camera module is 0°,

that is, the image is aligned horizontally.

90° 90°

•Unlock the screw on the camera bracket through using the torque wrench supplied

• Set the camera’s viewing angle then lock the screw on the bracket.

88°90°

±90°

•on the wall •on the ceiling

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Eneo Telecamera di sicurezza

Eneo

Eneo NXD-980IR37P B Istruzioni per l'installazione

Eneo

Eneo EDCH/143E/C Manuale utente

Eneo

Eneo NTD-4101 Manuale utente

Eneo

Eneo VKCD-1324B/IR Manuale utente

Eneo

Eneo HDB-2180Z03IR Manuale utente

Eneo

Eneo ICB-62M2713MAA Manuale utente

Eneo

Eneo PXD-1110F39 Istruzioni per l'installazione

Eneo

Eneo IPD-52F0028MAA Manuale utente

Eneo

Eneo MPD-62V2812P0B Manuale utente

Eneo

Eneo ICB-62M0550MAA Manuale utente

Eneo

Eneo ISD-59P0010P0A Manuale utente

Eneo

Eneo VKC-1357 Manuale utente

Eneo

Eneo IPD-68M3611P5A Manuale utente

Eneo

Eneo IPD-52M2713MAA Manuale utente

Eneo

Eneo VKC-1362 Manuale utente

Eneo

Eneo ISM-52F0043MPA Manuale utente

Eneo

Eneo HDD-2080Z03IR D Manuale utente

Eneo

Eneo VKC-1327B-IR/W3 Manuale utente

Eneo

Eneo VKCD-1322 Manuale utente

Eneo

Eneo MSM-42F0037MPA Manuale utente

Eneo

Eneo PXB-2080Z03 D Manuale utente

Eneo

Eneo MCB-72M2712M0A Manuale utente

Eneo

Eneo IPC-52A0003M0A Manuale utente

Eneo

Eneo MPD-62M2812P0A Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente