Eneo MPD-62M2812P0A Manuale utente
EN
User Manual
1/2.8” HD Dome, Fixed, WDR,
Day&Night, 1920x1080, 12V,
Infrared, 2.8-12mm, Indoor
MPD-62M2812P0A
Safety Precaution
03
MPD-62M2812P0A
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
MPD-62M2812P0A
Safety Precaution
04
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Avoid installing areas where has shock or vibration which results in the problems.
Pay attention to safety when laying the connection cable and observe that the cable
is not subjected to heavy loads, kinks or damage and no moisture can get in.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
This can lead to destruction.
The camera should never be operated in water.
MPD-62M2812P0A
Contents
05
Safety Precaution
p.03~04
Contents
p.05
Features
p.06
Composition
p.07
Dimensions
p.08
Part Names
p.09
Installation Instructions
p.10~12
Operating Instructions
p.13~29
Specifications
p.30
MPD-62M2812P0A
Features
Key Features
06
• Full-HD 2Mega pixel CAMERA, 1920x1080(30p/25p)
• The best low light performance with SONY’s STARVIS sensor
• Video output EX-SDI 1.0,2.0 / HD-SDI / TVI mode / AHD mode / CVI mode
or CVBS Selectable
• TVI mode / AHD mode / CVI mode, Video Transmission Distance
over Coax.; 500M
• f=2.8~12mm F1.4, 5Mega pixel Motorized zoom lens
• Automatically removable IR Cut filter by Dual filter switcher
• SNAP Focus by Motorized Zoom lens
• Motorized Zoom & Focus Adjustment
• Sensitivity of Color 0.08 Lux(LED off), B/W 0.005 Lux (LED off)
• True WDR (Wide Dynamic Range), 30/25fps
• ROI (Region of Interest) WDR mode:
- Proper compensation of exposure for each inside and outside of
interested area.
- Better contrast and No motion ghost effect
• Improved Noise figure with the enhanced 3D-NR
• Motion Detection, Privacy Mask, Defog, Sens-up(~x32), ACE(D-WDR),
Sharpness, Mirror/Flip, BLC/HLC, Anti-Saturation, Smart IR, Title Set
• Top performance at low light sensitivity (Sens-up On)
• Selectable Digital output 1080p or 720p
• OSD Menu & Video Sub-out port for easy installation & maintenance
• Circuit protection against faulty connection in power polarity
• UTC control through HD-TVI (Pelco-C, Hikvision) / AHD
• Built-in 2pcs High power LED
• Double side Anti-scratch Hard coated bubble dome
• Quick installation with Easy Adaptor (Flat or Tilted Adaptor)
07
Composition
MPD-62M2812P0A
Mounting Template Operating Instruction
Video Sub-out Cable
Mounting Screw:
3.5 x 25mm (3pcs)
Plastic Anchor:
6 x 30mm (3pcs)
Dome Camera
Easy Adaptor
(Flat type)
Open Driver (1pc)
Easy Adaptor
(Tilted type)
MPD-62M2812P0A
Dimensions
08
(unit : mm)
• Extreme care should be taken NOT to scratch the bubble dome surface while
the camera installing or adjusting.
• Care should be taken the cable is NOT to be damaged, kinked or exposed in
the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun or
spot light.
CAUTION
Tilted Adaptor
Ø116
Ø80
94 (with Flat adaptor)
52.5
116.3 (with Tilted adaptor)
MPD-62M2812P0A
Part Names
09
Dome Cover
Lens
Bubble Shield
Bubble
Dome Base
OSD Menu Control board
Easy Adaptor
Flat type
SMD LEDs
Light
Sensor
Power/Video Cable
3-Axis Gimbal
Tilted Easy Adaptor
MPD-62M2812P0A
Installation Instructions
10
Mounting Screw
(3.5x25mm)
Plastic Anchor
(6x30mm)
OPEN
LOCK
1. Drill three holes for mounting on the ceiling or wall.
2. Place the Easy Adaptors at the pre-drilled installation position and fix it by
using mounting screws.
3. Route the power/video cable to the connecting place.
4. Attach the dome base assembly to the Easy Adaptor.
5. Adjust the camera’s viewing angle (Pan, Tilt, Rotation)
6. Assemble the dome cover to the dome base unit.
• Be careful the LEDs when you control
the OSD setting with the joystick.
• Remove the sticker on the gimbal after
the OSD setting
CAUTION
Altri manuali per MPD-62M2812P0A
1
Indice
Altri manuali Eneo Telecamera di sicurezza
Eneo
Eneo NXP-880F26 Manuale utente
Eneo
Eneo ICB-73M2712MWA Manuale utente
Eneo
Eneo IPP-62A0012M0A Manuale utente
Eneo
Eneo ISD-55P0010P0A Manuale utente
Eneo
Eneo VKC-1341A/12-24 Manuale utente
Eneo
Eneo IPD-72M2712M5A Manuale utente
Eneo
Eneo MPD-62V2812P0A Manuale utente
Eneo
Eneo PXB-1080Z03B Manuale utente
Eneo
Eneo MPB-72M2812M0A Manuale utente
Eneo
Eneo EDMC-2221 Manuale utente
Eneo
Eneo IED-64M2812MAA Manuale utente
Eneo
Eneo APB-8SV2812MVA Manuale utente
Eneo
Eneo MPD-64A0003P0A Manuale utente
Eneo
Eneo IPD-62M2812P0A Manuale utente
Eneo
Eneo HDD-2080MIR Manuale utente
Eneo
Eneo MPB-72M0550M0A Manuale utente
Eneo
Eneo IPD-52M2713MAA Manuale utente
Eneo
Eneo ICB-62M2712M0A Manuale utente
Eneo
Eneo INP-7 Series Manuale utente
Eneo
Eneo Fastrax III EDC-3362 Manuale utente
