Energer ENB518HTL Manuale di installazione

200W MULTI-CUTTER ENB518HTL

SAFETY AND OPERATING MANUAL

Original Instructions

Read all safety warnings and all instructions before use. Failure to follow the

warnings and instructions may result in electric shock, re and/or serious

injury.

Save all warnings and instructions for future reference.

200W MULTI-CUTTER ENB518HTL

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings designated by the symbol and

all instructions.

WARNING! Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the

presence of ﬂammable liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators.There is an increased risk of electric shock if

your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of electric

shock.

3. Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the inﬂuence of

drugs, alcohol or medication. A moment of inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection can

reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could result

in a hazardous situation.

5. Service

a) Have your power tool serviced by a qualiﬁed repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTION FOR CUTTING

1. Hold power tool by insulated gripping surfaces, when performing an operation

where the cutting accessory may contact hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

2. Always wear a dust mask.

200W MULTI-CUTTER ENB518HTL

SPECIAL SAFETY INSTRUCTIONS

1. This tool is not suitable for wet sanding. Never use the water during working! And never use

the sanding sheet suitable wet sanding.

2. Never use the same sanding sheet for wood and metal. Please make sure the sanding sheet

can be used in working price.

3. Do not touch the moving sanding sheet.

4. Do not continue to use worn, torn or heavily clogged sanding sheets.

5. Do not work on materials containing asbestos. Asbestos is considered carcinogenic.

6. Secure the work piece (a work piece clamped with clamping devices or in a vice is held more

securely than by hand).

7. Remove the plug from the socket before carrying out any adjustment, servicing or

maintenance.

8. Fully unwind extension cords to avoid potential overheating.

9. When an extension cord is required, please ensure it has the correct ampere rating for the

power tool and that it is in a safe electrical condition.

10.Ensure the supply voltage is same as rating voltage.

11. The tool is double insulated for additional protection against a possible electrical insulation

failure within the tool.

WARNING:

When sanding wood or other ﬂammability materials; never use the lighter or spark plug!The

dust may be explosive.

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction

activities contains

Chemicals. Known to cause cancer, birth defects or other reproductive harm. Some examples

of these

chemicals are:

- lead from lead-based paints,

- crystalline silica from bricks and cement and other masonry products,

- arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work.To

reduce your

exposure to these chemicals: work in a well-ventilated area, and work with approved safety

equipment, such

as those dust masks that are specially designed to ﬁlter out microscopic particles.

VIBRATION

The European Physical Agents (Vibration) Directive has been brought in to help reduce

hand arm vibration syndrome injuries to power tool users.The directive requires power

tool manufacturers and suppliers to provide indicative vibration test results to enable users

to make informed decisions as to the period of time a power tool can be used safely on a

daily basis and the choice of tool.

Further Advice can be found at www.hse.gov.uk

Vibration total values (triax vector sum)determined according to EN60745:

Typical weighted vibration Vibration emission value ah=3.94m/s2

Uncertainty K =1.5m/s²

The declared vibration emission value should be used as a minimum level and should be used with the

current guidance on vibration.

Calculating the actual period of the actual period off use can be difﬁcult and the HSE website has further

information.

The declared vibration emission has been measured in accordance with a standardised test stated

above and may be used to compare one tool with another.

The declared vibration emission value may also be used in a preliminary assessment of exposure.

WARNING:

The vibration emission value during actual use of the power tool can differ from the declared value

depending on the ways in which the tool is used dependant on the following examples and other

variations on how the tool is used:

How the tool is used and the materials being cut.

The tool being in good condition and well maintained

The use the correct accessory for the tool and ensuring it is sharp and in good condition.

The tightness of the grip on the handles.

And the tool is being used as intended by its design and these instructions.

This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

WARNING:

Identify safety measures to protect the operator that are based on an estimation of exposure in the

actual conditions of use (taking account of all parts of the operating cycle such as the times when the

tool is switched off and when it is running idle in addition to the trigger time).NoteThe use of other

tools will reduce the users’ total working period on this tool.

Helping to minimise your vibration exposure risk.

ALWAYS use sharp blades.

Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)

Avoid using tools in temperatures of 10°C or less

Plan your work schedule to spread any high vibration tool use across a number of days.

Health Surveillance

All employees should be part of an employer’s health surveillance scheme to help identity any vibration

related diseases at an early stage, prevent disease progression and help

employees stay in work.

200W MULTI-CUTTER ENB518HTL

Double insulation:

The tool is double insulated.This means that all the external metal parts are electrically insulated

from the mains power supply.This is done by placing insulation barriers between the electrical and

mechanical components making it unnecessary for the tool to be earthed.

Important note:

Be sure the supply is the same as the voltage given on the rating plate.The tool is ﬁtted with a two-

core cable and plug.

Always remove the mains plug from socket before carrying out any adjustment or servicing.

SYMBOLS

To reduce the risk of injury, user must read instruction manual

Double insulation

Warning

Wear ear protection

Wear eye protection

Wear dust mask

Wear safety gloves

This product has been marked with a symbol relating to removing electric and electronic

waste.This means that this product shall not be discarded with household waste but

that it shall be returned to a collection system which conforms to the European Directive

2002/96/CE. It will then be recycled or dismantled in order to reduce the impact on the

environment. Electric and electronic equipment can be hazardous for the environment

and for human health since they contain hazardous substances.

yyWxx Manufacturing date code;Year of manufacturing (20yy) and week of manufacturing

(Wxx);

200W MULTI-CUTTER ENB518HTL

Components and controls

109876

3 1

12 14

1. Key storage

2. Variable speed control

3. Venting slots

4. On/Off switch

5. Sanding pad (PERFORATED)

6. Sanding sheet

7. Flange

8. Hex key

9. HSS semicircle saw blade

10. End cut blade

11. Dust extraction access

12. Dust collection adapter (35mm)

13. Dust collection adapter (32mm)

14. Small ﬂange

Works with other oscillating tool brands’ accessories. The following compatible

brands are trademarks owned by third parties which may be registered by

their respective owners: Erbauer®, Black & Decker®, bosch®, Chicago Electric®,

Craftsman®, Dremel®, fein®, Genesis®, Makita®, Mastercraft®, Milwaukee®,

Performax®, Porter Cable®, Ridgid®, Ryobi®, Skil®, andTool Shop®.

Indice

Altri manuali Energer Taglierina

Energer

Energer ENB522TCB Manuale utente

Manuali Taglierina popolari di altre marche

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Manuale utente

Makita

Makita DCS552 Manuale utente

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Manuale utente

Makita

Makita 4112HS Manuale utente

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Manuale utente

Hitachi

Hitachi CM 4SB2 Guida alla risoluzione dei problemi

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Manuale utente

GCC Technologies

GCC Technologies AFJ-24S Manuale utente

DeWalt

DeWalt XR LI-ION DCS350N Manuale utente

Baudat

Baudat ES1 Manuale utente

Mafell

Mafell ZAF 200 Guida

Makita

Makita 4100NH Manuale utente

Formax

Formax FD 574 Manuale utente

EINHELL

EINHELL TE-MA 1500 Manuale utente

Husqvarna

Husqvarna Cut-n-Break K 760 Manuale utente

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Manuale utente

TRI tool

TRI tool 301A Manuale utente

Roller

Roller King 1 1/4 Manuale utente