Energrid VS150X Power Bank
User’s Manual
AudibleVersion
http:
//
bit.l
y
/2pco2go
To charge a digital device
1. Connect a USB charging cable to any of the USB Output Ports of VS150X.
2. Connect the digital device being charged with the other end of the USB charging cable.
3. Press the Power Button.
4. Depending on the alert mode selected, VS150X beeps and/or vibrates three times,
where each beep or vibration pulse is followed by a 10-second silence if a normal
connection has once been detected.
5. The digital device is now being charged.
To charge VS150X
1. Connect a USB charging cable to a USB power adaptor. The USB power adaptor with
a minimum output current of 2A that usually comes with a common smartphone or
tablet is good for charging VS150X.
2. Connect the other end of the USB charging cable to the USB Input Port of VS150X.
Power Button
USB Input Port
5V/2.0A
3. Depending on the alert mode selected, VS150X beeps and/or vibrates three times,
where each beep or vibration pulse is followed by a 10-second silence if a normal
connection is once detected.
4. VS150X is now being charged.
[1] USB Output Port
5V/3.0A
To check the battery level of VS150X
[2] USB Output Port
5V/3.0A
1. Press the Power Button.
2. Depending on the alert mode selected, VS150X beeps or vibrates in different patterns
indicating different battery levels of:
0 % - 25% VS150X beeps and/or vibrates once
VS150X
25% - 50% VS150X beeps and/or vibrates twice
50% - 75% VS150X beeps and/or vibrates three times
75% - 100% VS150X beeps and/or vibrates four times
1 2
