Enertronica Santerno SINUS H PROFInet Manuale utente

• 15G0176B600 •

SINUS H

VARIABLE FREQUENCY DRIVE

USER MANUAL

- PROFInet Module -

Issued on 04/11/16

R.00

Software Version 32.41

•This manual is integrant and essential to the product. Carefully read the instructions contained

herein as they provide important hints for use and maintenance safety.

•This device is to be used only for the purposes it has been designed to. Other uses should be

considered improper and dangerous. The manufacturer is not responsible for possible damages

caused by improper, erroneous and irrational uses.

•Enertronica Santerno S.p.A. is responsible for the product in its original setting.

•Any changes to the structure or operating cycle of the product must be performed or authorized by

Enertronica Santerno S.p.A.

•Enertronica Santerno S.p.A. assumes no responsibility for the consequences resulting by the use of

non-original spare-parts.

•Enertronica Santerno S.p.A. reserves the right to make any technical changes to this manual and to

the product without prior notice. If printing errors or similar are detected, the corrections will be

included in the new releases of the manual.

•The information contained herein is the property of Enertronica Santerno S.p.A. and cannot be

reproduced. Enertronica Santerno S.p.A. enforces its rights on the drawings and catalogues

according to the law.

Enertronica Santerno S.p.A.

Via della Concia, 7 - 40023 Castel Guelfo (BO) Italy

Tel. +39 0542 489711 - Fax +39 0542 489722

santerno.com [email protected]

E n g l i s h

SINUS H

PROFInet Module

2/34

Thank you for purchasing the Sinus H PROFInet option module

Safety PRECAUTIONS

Always follow safety instructions to prevent accidents and potential hazards from occurring.

Safety precautions are classified into “WARNING” and “CAUTION” and their meanings are as

follows:

WARNING Improper operation may result in serious personal injury or death.

CAUTION Improper operation may result in slight to medium personal injury or property

damage

The indicated illustrations on the product and in the manual have the following meanings.

Danger may be present. Read the message and follow the instructions carefully.

Particular attention should be paid because danger of an electric shock may be present.

Keep operating instructions handy for quick reference.

Read the operating instructions carefully to fully understand the functions of the Sinus H series and

to use it properly.

CAUTION

Be cautious, when handling the CMOS components of the communication module.

Static may lead to malfunctioning of the product.

Turn off the inverter power, when changing the communication cable.

Otherwise, you may damage the module or a communication error may occur.

Make sure to insert the Communication module connector to the inverter precisely.

Otherwise, you may damage the module or a communication error may occur.

Check the parameter unit before setting up the parameter.

Otherwise, a communication error may occur.

PROFInet Module 
 
SINUS H  
 
   3/34 
Table of Contents 
1About the Product ..............................................................................................................4
1.1 PROFInet Technical Features ................................................................. 4
1.2 Included Items ........................................................................................ 4
1.3 GSDML File ............................................................................................ 4
2Part Names and Installation...............................................................................................5
2.1 Exterior ................................................................................................... 5
2.2 Installation .............................................................................................. 5
2.3 PROFInet Communication Module Front Panel ...................................... 8
3Network Connections.......................................................................................................10 
3.1 Network Cable Contacts ....................................................................... 10 
3.2Communication Cable Connector ......................................................... 10 
3.3 Network Cable Specification ................................................................. 10 
4PROFInet Communication Related Keypad Parameters................................................ 11 
5Keypad Parameters Related to PROFInet Communication Module ..............................13 
5.1 CNF Group ........................................................................................... 13 
5.2 DRV Group ........................................................................................... 13 
5.3 COM Group .......................................................................................... 14 
5.4 PRT Group............................................................................................ 17 
6PROFIdrive Status Diagram.............................................................................................18 
7Supported PROFIdrive Cyclic Telegram .........................................................................20 
7.1 Standard Telegram (Mode : 0) .............................................................. 20 
7.2 Vendor Specific Telegram (Mode : 1) .................................................... 20 
8Supported PROFIdrive Parameters.................................................................................25 
9Fault Message Counter (PNU[944]) and Fault Number (PNU[947]) ...............................27 
10 Accessing the Sinus H Common Parameters using the PROFIdrive Parameters .......30 
11 Accessing Sinus H Inverter Parameters using the PROFInet Record Data Object......32 
12 Processing the Alarms..................................................................................................... 33 
13 Troubleshooting ............................................................................................................... 34 
 
 

SINUS H

PROFInet Module

4/34

1 About the Product

The Sinus H PROFInet communication module provides PROFInet network communication for the

Sinus H inverter. PROFInet is a communication protocol compliant with IEC 61158 Type 10. The

PROFInet communication module provides full-duplex data transfer which enables real-time

communication without transmission collisions. Using a PROFInet connection, the Sinus H inverter

can be controlled and monitored via a PLC sequence program or any master PLC module. In addition,

PROFInet is easy to connect, enabling faster installation and easier maintenance.

1.1 PROFInet Technical Features

Item

Description

Communication protocol

PROFInet IO CC-A

Communication speed

100 Mbps

Communication type

Full Duplex

Distance

100m (Twisted Pair)

Max. number of Node

64 each

Service

PROFIdrive Class 1

Topology

Line, Tree, Star topology

1.2 Included Items

This product - P/N ZZ0176104 - is consisting of these kinds of parts.

- PROFInet Communication Module for Sinus H: 1 each

- Brass Bar (M3xL23): 1 each

- Brass Bar (M3xL17.3): 1 each

- Fixed Screw (M3xL8): 2 each

1.3 GSDML File

The GSDML file contains information about the PROFInet communication module installed in an

inverter. When you configure the PROFInet network, the network configuration software requires the

GSDML file.

** You can download the file from http://santerno.com/.

PROFInet Module

SINUS H

5/34

2 Part Names and Installation

2.1 Exterior

2.2 Installation

Warning) Connect a communication network after the power supply is off. If PROFInet communication

module is removed or installed, the power supply should be switched off. Otherwise, the Sinus H

inverter will be damaged entirely.

Take off PROFInet communication module from the product after the power supply is totally

discharged.

Unfasten the front cover fixing bolt

to remove the front cover and remove

I/O cover ((1), (2)) from

a dedicated Sinus H inverter

for communication.

SINUS H

PROFInet Module

6/34

■Remove the keypad (3).

■Unfasten a screw from

I/O board and

fasten the prepared

brass bar (4) and (5).

■Mount PROFInet communication Module (6)

and fasten the removed screw (7)

and the included screw (7).

PROFInet Module

SINUS H

7/34

■Install the keypad (9) at first and

the communication module

cover (10) in order.

■Install the front cover (11) again

And installation is completed.

SINUS H

PROFInet Module

8/34

2.3 PROFInet Communication Module Front Panel

Indicator

Color

Description

Status

Remarks

LED0

LINK1/ACT1

Green

Normal

operation

LINK1 is connected to a network.

OFF

LINK1 is not connected to a network

Yellow

Normal

operation

OFF

Network LINK1 is not

transmitting/receiving data

Flashing

Data transmission between the Master

unit and the communication module is

in progress at network LINK1.

LED1

LINK2/ACT2

Green

Normal

operation

LINK2 is connected to a network.

OFF

LINK2 is not connected to a network

Yellow

Normal

operation

OFF

Network LINK1 is not

transmitting/receiving data

Flashing

Data transmission between the master

unit and the communication module is

in progress at network LINK2.

LED2

ERROR

Red

Normal

operation

OFF

Communication between the

communication module and the inverter

is normal.

Communication

fault

CPU and

ERROR

indicators flash

simultaneously

Communication error occurred between

the communication module and the

inverter

CPU and

ERROR

indicators flash

asynchronously,

in 2 second

intervals

Abnormal communication conditions

exist between the communication

module and the inverter.

The communication module failed to

RUN

ERROR

LINK1

LINK2

PROFInet Module

SINUS H

9/34

Indicator

Color

Description

Status

Remarks

boot up.

LED3

CPU

Green

Abnormal

operation

The CPU is not operating.

OFF

Normal

operation

Flashing

(1 second

intervals)

The communication module is installed

correctly in the inverter.

SINUS H

PROFInet Module

10/34

3 Network Connections

3.1 Network Cable Contacts

Pin No.

Signal

Description

Cable Color

TX+

Data Transmission (+)

White/Yellow

TX-

Data Transmission (-)

Yellow

RX+

Data Reception (+)

White/Green

NONE

Not Used

Blue

NONE

Not Used

White/Blue

RX-

Data Reception (-)

Green

NONE

Not Used

White/Brown

NONE

Not Used

Brown

3.2 Communication Cable Connector

** Wires connected to pin #1 and pin #2 must be twisted.

** Wires connected to pin #3 and pin #6 must be twisted.

3.3 Network Cable Specification

PROFInet network communication requires STP (category 6a, or higher) network cables.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Enertronica Santerno Hardware di rete

Enertronica Santerno

Enertronica Santerno SINUS H ZZ0176102 Manuale utente

Enertronica Santerno

Enertronica Santerno LT 1500V Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente