ENERVEX ADC150 Manuale utente
3912050 06.17 Product Information
ENERVEX
ADC150 FAN CONTROL
ENERVEX Inc.
1685 Bluegrass Lakes Parkway
Alpharetta, GA 30004
USA
P: 770.587.3238
F: 770.587.4731
T: 800.255.2923
www.enervex.com
Use
The ENERVEX ADC150 is a Modulating Fan Control used with up to
2 appliances to monitor and maintain a constant draft or pressure
in a chimney or duct. The ADC150 can be used with models RS,
RSHT, and GSV fans. It can control the fan speed directly or via a
Variable Frequency Drive (VFD, sold separately).
The ADC150 is typically used to control the draft of a gas-red,
sealed replace or water heaters.
Description
The ADC150 monitors the draft in a chimney system via a
connection to a pressure transducer (XTP) attached to the chimney,
and maintains the draft by modulating the fan speed. It provides a
10-120V AC power to single phase fans and 0-10V DC control signal
to control 3-phase fans via a variable frequency drive.
The control has an integrated safety system that assures the heating
appliance(s) is shut down in case of insufcient draft after 15-180
seconds (user adjustable). The ADC150 has an integrated damper
relay that works with ENERVEX MFD (Mechanical Fireplace Damper)
to automatically open the damper prior to fan initialization and close
the damper after the appliance shuts down. End-switches in the
damper actuator wired to the ADC150 ensure the damper must be
fully open prior to allowing the appliance to operate. The control
also features a post purge function (3 min) to evacuate the chimney
system of residual ue gases after the appliance shuts down.
Material
The enclosure is made of NEMA 1 rated ABS plastic.
Standard Equipment
• ADC150 Control Box
• XTP Pressure Transducer
• Stack Probe
• 6' Silicone Tubing
Listings
The ADC150 Fan Control is ETL Listed in the U.S. and Canada:
• UL 508 Standard for Industrial Control Equipment (17th Ed.)
• CSA C22.2 No. 14-05 - Standard for Industrial Control Equipment
Warranty
2-Year Factory Warranty. Complete warranty conditions are available
from ENERVEX Inc.
Specications are subject to change without notice.
ENERVEX
ADC150 FAN CONTROL
3912050 06.17 Product Information
ENERVEX Inc.
1685 Bluegrass Lakes Parkway
Alpharetta, GA 30004
USA
P: 770.587.3238
F: 770.587.4731
T: 800.255.2923
www.enervex.com
ADC150 Control
Power Supply V 1x120VAC
Amperage A 7.0
Operating Temperature °F / °C -4 to 122 / -20 to 50
Range of Operation inWC / PA 0.05-0.55 / 12.5-137.5
Tolerance inWC / PA 0.01/3 +/-10%
Control signal mA Max. 10
Control relay Max. 120
Output VAC 10-120
VDC 0-10
Dimensions
A in / mm 9.6 / 244
B in / mm 6.3 / 160
C in / mm 3.5 / 90
Weight lbs / kg 2.6 / 1.2
EMC Standard Emission EN 50 081-1
Immunity EN 50 082-2
XTP Sensor
Power Supply VDC 12-36
Amperage mA <20
Output VDC 0-10
Operating Temperature °F / °C 0 to 160 / -18 to 71
Accuracy inWC / PA +/-0.08%
Dimensions
D in / mm 3.70 / 94
E in / mm 5.12 / 130
F in / mm 6.18 / 157
G in / mm 3.13 / 80
Weight lbs / kg .6 / .3
Stack Probe
Dimensions H in / mm 4.25 / 108
I in / mm 3.50 / 89
Specifications
B
A
C
ENERVEX
ADC150
D
E
F
G
D
E
F
G
ADC150 Fan Control
Altri manuali per ADC150
1
Altri manuali ENERVEX Controllori
