EnGenius ERB9250 Manuale utente
EnGenius ERB9250 300M Range Extender
User Manual
ERB9250 User Manual
2
T
ABLE OF
C
ONTENTS
1.
Introduction ........................................................................................................ 4
1.1. Package Contents..............................................................................................5
1.2. Product Layout...................................................................................................5
2.
Installation .......................................................................................................... 8
Getting Started......................................................................................................... 8
Placing Your Range Extender in an Optimal Location....................................... 13
3.
System............................................................................................................... 16
3.1. Operation Mode ...............................................................................................16
3.2. Status...............................................................................................................17
3.3. Event Log.........................................................................................................18
3.4. Monitor.............................................................................................................19
4.
Wireless............................................................................................................. 20
4.1. Status...............................................................................................................20
The Status screen displays the repeater connection status, WLAN setting, and SSID
detail information..............................................................................................20
4.2. Basic................................................................................................................20
If you prefer the manual setup, you can choose Site Survey to search for the target
router to connect with the ERB9250.................................................................20
4.3. Advanced.........................................................................................................22
4.4. Security............................................................................................................23
4.5. Filter.................................................................................................................24
4.6. WPS.................................................................................................................25
4.7. Client List.........................................................................................................25
5.
Network............................................................................................................. 26
5.1. Status...............................................................................................................26
5.2. LAN..................................................................................................................26
ERB9250 User Manual
3
6.
Management ..................................................................................................... 27
6.1. Admin...............................................................................................................27
6.2. Firmware..........................................................................................................27
6.3. Configure .........................................................................................................27
6.4. Reset ...............................................................................................................28
7.
Tools.................................................................................................................. 29
7.1. Time Setting.....................................................................................................29
7.2. Diagnosis.........................................................................................................30
8.
Logout............................................................................................................... 31
Troubleshooting .................................................................................................... 32
Cannot access the Internet after successfully setup ERB9250 with your router.......32
ERB9250 User Manual
4
1. Introduction
ERB9250 is a 2.4GHz 802.11b/g/n Range Extender. You can extend the reach of your
wireless network to areas with poor signal reception or dead spots by adding an ERB9250 for
greater coverage.
The Range Extender works as a bridge to connect and extend your existing wireless network.
It receives the signal from a wireless router and rebroadcasts the signal outside of the router’s
wireless coverage area. The ERB9250 can only re-boost strong or good signals received from a
wireless router. Thus, placing the ERB9250 in a location where a good signal (at least 3 bars) is
still available and which is in clear line of sight with your router (as few obstructions as possible)
will ensure that your wireless coverage can be expanded, minimizing areas prone to weak or no
signal coverage.
While the ERB9250 Range Extender can benefit users when they are in a weak spot or dead
zone in the existing wireless network, the best performance will be obtained by connecting to the
original wireless network when possible. Because the Range Extender relays the wireless signal,
it is inherently slower than traffic which is on the original wireless network. Consequently,
EnGenius recommends that users connect to the Range Extender only when they are not able to
receive good signal strength from the original wireless network.
The ERB9250 Range Extender supports WEP, WPA, and WPA2 encryption standards to
ensure compatibility with a majority of routers. To ensure optimum performance, it is highly
recommended to utilize an EnGenius 802.11b/g/n router to pair with the ERB9250. The following
EnGenius routers have been tested to operate better with the ERB9250: ESR9752, ESR9753,
ESR9850, ESR9855G, ESR1221N, and ESR1221N2.
ERB9250 User Manual
5
1.1. Package Contents
Open the package carefully, and make sure that none of the items which are listed below are
missing. Do not discard the packing materials. In case of return, the unit must be shipped back
in its original packaging.
ERB9250 802.11b/g/n Range Extender
Power Adapter
2dBi 2.4GHz SMA Detachable Antennas
Quick Install Guide
CD (User’s Manual)
1.2. Product Layout
Top View: LED Layout
LAN LED
WPS Button
Power LED
WLAN LED
ERB9250 User Manual
6
RP-SMA Antenna Connections
LED Description Table
LED Description
LAN : (1) Blue Link solid, Traffic blinking
WLAN : (1) Blue Link solid, Traffic blinking
Power/Status : (1) Red On solid, Reset blinking
8
2. Installation
Getting Started
1. Confirm that your Internet and the wireless network are active before powering on your
Range Extender.
2. Connect the two antennas to the antenna connectors on the rear panel of your Range
Extender.
3. Decide whether to use the Range Extender’s Quick Manual Configuration or WPS
Configuration:
– Quick Manual Configuration – It is highly recommended to use this user friendly
configuration method.
– WPS Configuration. You can use this configuration method if your router supports
WPS.
4. After configuring the ERB9250 Range Extender with your router, you can move the
ERB9250 to the place where a good signal (at least 3 bars) is available and which is
preferably in line of sight of your router (as few obstructions as possible). Please see
“Placing Your Range Extender in an Optimal Location” for how to find an optimal
location for the ERB9250 Range Extender.
9
Quick Manual Configuration
1. Power on the ERB9250.
2. Disable any wireless connections present on the computer before setting up ERB9250.
3. Connect one end of the supplied Ethernet cable to the Ethernet/RJ45 connector on the
rear panel of the Range Extender, and connect the other end to an Ethernet port on
your desktop or laptop.
4. Open a web browser (Internet Explorer/Firefox/Safari). If you use Internet Explorer or
Safari, it will direct you to step 5. If you use Firefox, please enter any web site URL (for
example: www.google.com) or the default IP Address of the Range Extender,
http://192.168.1.2.
5. Click Scan Now and you will see all of the wireless networks in range of the ERB9250.
10
6. Select the target router and click Connect
7. Enter the passwords in the Pre-shared Key column if the target router is encrypted
with passwords. Click Connect.
Altri manuali per ERB9250
6
Indice
Altri manuali EnGenius Estensione
EnGenius
EnGenius ERB9250 Manuale utente
EnGenius
EnGenius EZ Hotspot Manuale utente
EnGenius
EnGenius X-TRA RANGE ERB300H Manuale utente
EnGenius
EnGenius ERB9260 Manuale utente
EnGenius
EnGenius X-TRA RANGE ERB300H Manuale utente
EnGenius
EnGenius ERB9250 Manuale utente
EnGenius
EnGenius ERB9260 Manuale utente
EnGenius
EnGenius ERB9250 Manuale utente
EnGenius
EnGenius ERB9250 Manuale utente
EnGenius
EnGenius ERB9250 Manuale utente
